CM06FD152FO3 Mica Capacitor Equivalent & Substitute Parts

Part Overview

The CM06FD152FO3 is a 1500 pF mica capacitor rated for 500 V operation, manufactured by Cornell Dubilier Electronics (CDE). This component is classified as Active product status and features general-purpose characteristics suitable for through-hole radial mounting applications. Alternative equivalent parts become necessary when the CM06 series experiences supply constraints, procurement delays, or when design requirements necessitate RoHS compliance upgrades without altering electrical performance specifications.

Substiute Parts

CM06FD152FO3

Cornell Dubilier Electronics (CDE)In Stock: 1227CM06FD152FO3 Datasheet

Current PartRFQ

CD19FD152FO3F

Cornell Dubilier Electronics (CDE)In Stock: 1214CD19FD152FO3F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CM06FD152FO3 is determined by strict electrical and mechanical parameter alignment. All substitute parts must maintain identical values for the following critical parameters:

• Capacitance: 1500 pF (no deviation)
• Tolerance: ±1%
• Voltage Rating: 500 V (minimum)
• Dielectric Material: Mica
• Operating Temperature Range: -55°C to 125°C
• Mounting Type: Through Hole
• Package Type: Radial
• Lead Spacing: 0.343" (8.70 mm)
• Physical Dimensions: 0.661" L x 0.228" W (16.80 mm x 5.80 mm)
• Height - Seated: 0.520" (13.20 mm) maximum

The substitute part CD19FD152FO3F qualifies as a parametric equivalent, meeting all electrical and mechanical specifications required for direct replacement in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

Both CM06FD152FO3 and CD19FD152FO3F are Active product status components from Cornell Dubilier Electronics, suitable for equivalent circuit substitution. The primary differentiation between these parts lies in regulatory compliance status.

The CM06FD152FO3 is RoHS non-compliant and REACH Affected. The CD19FD152FO3F achieves ROHS3 compliance and REACH Unaffected status. Selection between these equivalents should be based on application regulatory requirements and supply availability. Both parts meet identical electrical and mechanical specifications, enabling direct circuit replacement without design modification.

Frequently Asked Questions (FAQ)

Q: Can the CD19FD152FO3F be used in place of the CM06FD152FO3 without modification?

A: Yes. Both parts share identical electrical ratings (1500 pF, ±1%, 500 V), dielectric material (Mica), temperature range (-55°C to 125°C), and mechanical dimensions. Direct PCB substitution is possible without circuit redesign.

Q: What is the primary difference between these two equivalent parts?

A: The CD19FD152FO3F provides ROHS3 compliance and REACH Unaffected status, while the CM06FD152FO3 does not. Electrical and mechanical specifications are identical.

Q: Are the physical footprints identical?

A: Yes. Both components have identical lead spacing (0.343" / 8.70 mm), dimensions (0.661" L x 0.228" W), and maximum seated height (0.520"). PCB layouts require no modification for substitution.

Q: What factors should determine which part to select?

A: Selection should be based on supply availability and regulatory compliance requirements for your application. From an electrical and mechanical standpoint, both parts are equivalent.

Q: Does the operating temperature range remain constant between parts?

A: Yes. Both parts operate across the identical temperature range of -55°C to 125°C.