CL-SB-23C-12 Equivalent & Substitute Parts

Part Overview

The CL-SB-23C-12 is a slide switch manufactured by Nidec Components Corporation, configured as a DP3T (Double Pole Triple Throw) circuit with non-shorting contact timing. This through-hole, right-angle mounted switch is rated for 200mA DC at 12V and is designed for applications requiring three-position switching functionality. The part is currently active in production with 903 units in stock. Alternative equivalent parts may be required due to supply constraints, design revisions, or specific application requirements where substitute electrical or mechanical parameters are acceptable.

Substiute Parts

CL-SB-23C-12

Nidec Components CorporationIn Stock: 997CL-SB-23C-12 Datasheet

Current PartRFQ

JS203011AQN

C&KIn Stock: 2825JS203011AQN Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CL-SB-23C-12 is determined by the following critical parameters:

Mandatory Matching Parameters:

• Circuit configuration: DP3T
• Switch function: On-On-On
• Mounting type: Through Hole, Right Angle
• Actuator length: 2.00mm
• Switch travel: 2.00mm
• Operating temperature range: -40°C to 85°C
• RoHS compliance status

Allowable Variation Parameters:

• Current rating: Substitute must meet or exceed 200mA
• Voltage rating: Substitute must meet or exceed 12V
• Contact material and finish: May differ if electrical performance is maintained
• Electrical life: May differ from 10,000 cycles
• Packaging format: May differ (Bulk vs. Tube)

The substitute part JS203011AQN from C&K meets the mandatory matching criteria for circuit configuration, switch function, mounting type, actuator dimensions, and operating temperature range. Variations in current rating (300mA vs. 200mA), voltage rating (6V vs. 12V), contact material (Copper Alloy vs. Copper), contact finish (Silver vs. Gold), electrical life (5,000 vs. 10,000 cycles), and packaging (Tube vs. Bulk) are noted as differences that must be evaluated for specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

Both the CL-SB-23C-12 and JS203011AQN are active production parts with ROHS3 compliance and REACH unaffected status, making them suitable for applications requiring regulatory compliance. The primary consideration for selection is the voltage rating differential: the main part is rated for 12V DC operation, while the substitute is rated for 6V DC. Applications operating at 12V DC should use the CL-SB-23C-12 to ensure rated performance. The substitute JS203011AQN is appropriate only for applications operating at 6V DC or lower. The higher current rating of the substitute (300mA vs. 200mA) does not present a limitation for applications designed for 200mA operation. The reduced electrical life specification of the substitute (5,000 cycles vs. 10,000 cycles) should be evaluated against application duty cycle requirements.

Frequently Asked Questions (FAQ)

Q: Can JS203011AQN be used in place of CL-SB-23C-12 in a 12V application?

A: No. The JS203011AQN is rated for 6V DC maximum, while the CL-SB-23C-12 is rated for 12V DC. Using the substitute in a 12V circuit exceeds its voltage rating and may result in contact degradation or failure.

Q: Are the mechanical dimensions identical between these parts?

A: Yes. Both parts share identical actuator length (2.00mm), switch travel (2.00mm), and mounting configuration (Through Hole, Right Angle), ensuring mechanical compatibility in PCB layouts.

Q: What is the significance of the different contact materials and finishes?

A: The CL-SB-23C-12 uses gold-plated copper contacts, while the JS203011AQN uses silver-plated copper alloy contacts. Contact material and finish affect corrosion resistance, contact resistance, and long-term reliability. Selection should be based on application environment and signal integrity requirements.

Q: Does the difference in electrical life affect part selection?

A: The CL-SB-23C-12 is rated for 10,000 electrical cycles, while the JS203011AQN is rated for 5,000 cycles. Applications with high switching frequency or long operational life should use the part with the higher electrical life rating appropriate to the duty cycle.

Q: Are both parts available in the same packaging format?

A: No. The CL-SB-23C-12 is supplied in Bulk packaging, while the JS203011AQN is supplied in Tube packaging. Packaging selection may affect procurement, handling, and assembly processes.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both parts are ROHS3 compliant and REACH unaffected, meeting equivalent regulatory standards for restricted substance compliance.