CD19FD222FO3 Mica Capacitor 2200 pF 500 V Radial Equivalent & Substitute Parts

Part Overview

The CD19FD222FO3 is a 2200 pF mica capacitor rated for 500 V with ±1% tolerance, manufactured by Cornell Dubilier Electronics (CDE). This through-hole radial component operates across the temperature range of -55°C to 125°C and is classified as active product status. Mica capacitors in this specification are used in general-purpose applications requiring stable capacitance and high voltage performance. Substitute parts may be required due to inventory availability, compliance requirements, or series discontinuation.

Substiute Parts

CD19FD222FO3

Cornell Dubilier Electronics (CDE)In Stock: 907CD19FD222FO3 Datasheet

Current PartRFQ

CD19FD222FO3F

Cornell Dubilier Electronics (CDE)In Stock: 2122CD19FD222FO3F Datasheet

Parametric EquivalentRFQ

CM06FD222FO3

Cornell Dubilier Electronics (CDE)In Stock: 1101CM06FD222FO3 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the CD19FD222FO3 are qualified based on the following electrical and mechanical parameters:

Electrical Equivalence Criteria:

• Capacitance value: 2200 pF (exact match required)
• Tolerance: ±1% (exact match required)
• Voltage rating: 500 V (exact match required)
• Dielectric material: Mica (exact match required)

Mechanical Compatibility Criteria:

• Mounting type: Through Hole (exact match required)
• Package type: Radial (exact match required)
• Lead spacing: 0.343" (8.70 mm) (exact match required)
• Physical dimensions: 0.669" L x 0.252" W (17.00 mm x 6.40 mm) (exact match required)
• Height - Seated (Max): 0.532" (13.50 mm) (exact match required)

Environmental Operating Range:

• Operating temperature: -55°C to 125°C (exact match required)

All identified substitute parts meet these criteria and are therefore electrically and mechanically interchangeable with the CD19FD222FO3 in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

CD19FD222FO3F is the primary substitute for CD19FD222FO3. Both parts are from the same CD19 series and share identical electrical and mechanical specifications. The CD19FD222FO3F carries ROHS3 compliance status, whereas the CD19FD222FO3 is RoHS non-compliant. The CD19FD222FO3F is REACH Unaffected, compared to the CD19FD222FO3 which is REACH Affected. Selection of CD19FD222FO3F is appropriate for applications requiring RoHS3 compliance or REACH unaffected status. Inventory availability for CD19FD222FO3F is 2055 pieces.

CM06FD222FO3 is an alternative substitute from the CM06 series. This part maintains all electrical and mechanical equivalence to CD19FD222FO3. The CM06FD222FO3 carries Moisture Sensitivity Level (MSL) rating of 1 (Unlimited), whereas CD19FD222FO3 has MSL listed as Not Applicable. Both parts are RoHS non-compliant and REACH Affected. Inventory availability for CM06FD222FO3 is 1033 pieces.

Selection between substitute parts should be based on compliance requirements, moisture sensitivity considerations, and inventory availability for the specific application.

Frequently Asked Questions (FAQ)

Q: Can CD19FD222FO3F be used as a direct replacement for CD19FD222FO3?

A: Yes. CD19FD222FO3F is electrically and mechanically equivalent to CD19FD222FO3. Both parts have identical capacitance (2200 pF), tolerance (±1%), voltage rating (500 V), dielectric material (Mica), operating temperature range (-55°C to 125°C), mounting type (Through Hole), package type (Radial), lead spacing (0.343" / 8.70 mm), and physical dimensions (0.669" L x 0.252" W / 17.00 mm x 6.40 mm). The primary difference is compliance status: CD19FD222FO3F is ROHS3 Compliant and REACH Unaffected.

Q: Can CM06FD222FO3 be used as a direct replacement for CD19FD222FO3?

A: Yes. CM06FD222FO3 is electrically and mechanically equivalent to CD19FD222FO3. All electrical parameters (capacitance, tolerance, voltage rating, dielectric material, operating temperature) and mechanical parameters (mounting type, package type, lead spacing, physical dimensions) are identical. The CM06FD222FO3 differs in series designation (CM06 versus CD19) and Moisture Sensitivity Level (MSL 1 Unlimited versus Not Applicable).

Q: What are the critical parameters for substitution compatibility?

A: Substitution compatibility is determined by exact matching of: capacitance value (2200 pF), tolerance (±1%), voltage rating (500 V), dielectric material (Mica), mounting type (Through Hole), package type (Radial), lead spacing (0.343" / 8.70 mm), physical dimensions (0.669" L x 0.252" W / 17.00 mm x 6.40 mm), height seated maximum (0.532" / 13.50 mm), and operating temperature range (-55°C to 125°C).

Q: Are there differences in RoHS or REACH compliance between the substitute parts?

A: Yes. CD19FD222FO3 and CM06FD222FO3 are both RoHS non-compliant and REACH Affected. CD19FD222FO3F is ROHS3 Compliant and REACH Unaffected. Selection should account for regulatory requirements applicable to the end application.

Q: What is the difference in Moisture Sensitivity Level (MSL) between the parts?

A: CD19FD222FO3 and CD19FD222FO3F have MSL listed as Not Applicable. CM06FD222FO3 has MSL rating of 1 (Unlimited). This indicates CM06FD222FO3 has no moisture sensitivity restrictions during storage and handling.