CD10FD101GO3 Equivalent & Substitute Parts

Part Overview

The CD10FD101GO3 is a 100 pF mica capacitor rated for 500 V with ±2% tolerance, manufactured by Cornell Dubilier Electronics (CDE). This through-hole radial component is designed for general-purpose applications requiring stable capacitance and high voltage performance across the operating temperature range of -55°C to 125°C. The part is currently active in production. Substitute parts are identified to address inventory availability, compliance requirements, or specific application constraints while maintaining electrical and mechanical compatibility.

Substiute Parts

CD10FD101GO3

Cornell Dubilier Electronics (CDE)In Stock: 864CD10FD101GO3 Datasheet

Current PartRFQ

CD10FD101GO3F

Cornell Dubilier Electronics (CDE)In Stock: 1015CD10FD101GO3F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CD10FD101GO3 is determined by strict equivalence across all electrical and mechanical parameters. The substitute part CD10FD101GO3F maintains identical specifications for:

• Capacitance value (100 pF)
• Tolerance (±2%)
• Rated voltage (500 V)
• Dielectric material (Mica)
• Operating temperature range (-55°C to 125°C)
• Mounting type (Through Hole)
• Package configuration (Radial)
• Lead spacing (0.142" / 3.60 mm)
• Physical dimensions (0.370" L x 0.201" W / 9.40 mm x 5.10 mm)
• Maximum seated height (0.350" / 8.90 mm)
• Series designation (CD10)
• Manufacturer (Cornell Dubilier Electronics)

Both parts are classified as general-purpose components within the same product series and share identical ECCN (EAR99) and HTSUS (8532.29.0020) codes. The primary distinction between these parts relates to regulatory compliance status.

Parameter Comparison

Engineering Selection Recommendations

Selection between CD10FD101GO3 and CD10FD101GO3F is determined by regulatory compliance requirements applicable to the end application and target market.

CD10FD101GO3 is suitable for applications where RoHS compliance is not mandated and REACH-affected material usage is acceptable. This part maintains full electrical and mechanical compatibility with existing designs.

CD10FD101GO3F is the appropriate selection for applications requiring ROHS3 compliance and REACH-unaffected material composition. This variant is functionally and mechanically identical to the CD10FD101GO3 and provides equivalent electrical performance across all specified parameters.

Both parts are active products from Cornell Dubilier Electronics and share identical electrical characteristics, physical dimensions, and mounting specifications. Selection should be based solely on the regulatory compliance framework of the target application.

Frequently Asked Questions (FAQ)

Q: Are CD10FD101GO3 and CD10FD101GO3F electrically interchangeable?

A: Yes. Both parts have identical capacitance (100 pF), tolerance (±2%), rated voltage (500 V), dielectric material (Mica), and operating temperature range (-55°C to 125°C). They are direct electrical equivalents.

Q: Can these parts be used interchangeably on the same PCB?

A: Yes. Both parts share identical physical dimensions (0.370" L x 0.201" W), lead spacing (0.142" / 3.60 mm), and maximum seated height (0.350" / 8.90 mm). They are mechanically compatible with the same through-hole footprint.

Q: What is the difference between these two part numbers?

A: The primary difference is regulatory compliance. CD10FD101GO3F is ROHS3 compliant and REACH-unaffected, while CD10FD101GO3 is RoHS non-compliant and REACH-affected. All electrical and mechanical specifications are identical.

Q: Which part should I select for a new design?

A: Selection depends on the regulatory requirements of your target market and application. If ROHS3 compliance is required, use CD10FD101GO3F. If RoHS compliance is not a requirement, either part is acceptable based on availability and cost considerations.

Q: Are both parts currently in production?

A: Yes. Both CD10FD101GO3 and CD10FD101GO3F are active products from Cornell Dubilier Electronics.

Q: What is the lead spacing for these radial capacitors?

A: The lead spacing is 0.142 inches (3.60 mm) for both parts.

Q: Can these parts operate across the full temperature range in all applications?

A: Both parts are rated for operation from -55°C to 125°C. Actual performance depends on the specific application circuit and environmental conditions.