C323C104F5G5TA Equivalent & Substitute Parts

Part Overview

The C323C104F5G5TA is a 0.1 µF ceramic capacitor manufactured by KEMET, rated for 50V with C0G/NP0 temperature coefficient and ±1% tolerance. This radial through-hole component is part of the GoldMax 300 Comm C0G series and maintains active product status. Substitute parts are identified based on matching electrical specifications and compatible mechanical parameters that allow direct circuit board integration without functional degradation.

Substiute Parts

C323C104F5G5TA

KEMETIn Stock: 710C323C104F5G5TA Datasheet

Current PartRFQ

C333C104F5G5TA

KEMETIn Stock: 1276C333C104F5G5TA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the C323C104F5G5TA is determined by the following criteria:

Electrical Parameters (Non-Negotiable):

• Capacitance value: 0.1 µF
• Voltage rating: 50V minimum
• Tolerance: ±1% or tighter
• Temperature coefficient: C0G/NP0 only
• Operating temperature range: -55°C to 125°C minimum

Mechanical Parameters (Board Integration):

• Mounting type: Through hole radial configuration
• Lead spacing: 0.200" (5.08mm) pitch
• Lead style: Formed leads (kinked or straight acceptable)

Compliance Parameters:

• RoHS3 compliance required
• REACH unaffected status maintained

The C333C104F5G5TA qualifies as a direct substitute because it matches all electrical specifications and maintains compatible lead spacing. Physical size differences (body dimensions and height) do not affect electrical function or circuit board mounting when lead spacing remains constant.

Parameter Comparison

Engineering Selection Recommendations

C323C104F5G5TA is the primary selection when:

• PCB layout requires minimal vertical clearance
• Space constraints limit component height to 0.300" (7.62mm) maximum
• Original design specifications call for compact radial package dimensions

C333C104F5G5TA is an acceptable substitute when:

• Electrical performance requirements are identical to the main part
• PCB layout accommodates the larger body dimensions (0.280" L x 0.160" W) and height (0.400" maximum)
• Lead spacing of 0.200" (5.08mm) matches existing PCB footprint
• Vertical clearance of 0.400" (10.16mm) is available above the component

Both parts maintain ROHS3 compliance and active product status. Selection between these parts depends solely on available PCB space and mechanical constraints, not electrical performance.

Frequently Asked Questions (FAQ)

Q: Can C333C104F5G5TA replace C323C104F5G5TA in any application?

A: C333C104F5G5TA is electrically equivalent and can replace C323C104F5G5TA provided the PCB layout accommodates the larger body dimensions (0.280" x 0.160" vs. 0.200" x 0.125") and increased seated height (0.400" vs. 0.300"). Lead spacing remains identical at 0.200" (5.08mm), ensuring footprint compatibility.

Q: Are there any electrical differences between these parts?

A: No. Both parts have identical capacitance (0.1 µF), tolerance (±1%), voltage rating (50V), temperature coefficient (C0G/NP0), and operating temperature range (-55°C to 125°C). Electrical performance is equivalent.

Q: What is the difference between "Formed Leads" and "Formed Leads - Kinked"?

A: Both lead styles are compatible with standard 0.200" (5.08mm) pitch PCB holes. The kinked lead style in C333C104F5G5TA provides additional mechanical support but does not affect electrical function or circuit performance.

Q: Do both parts have the same compliance certifications?

A: Yes. Both C323C104F5G5TA and C333C104F5G5TA are ROHS3 compliant, REACH unaffected, and classified under ECCN EAR99 with HTSUS code 8532.24.0060.

Q: Which part should I choose for a new design?

A: Selection depends on available PCB space. If vertical clearance is limited to 0.300" (7.62mm) or less, use C323C104F5G5TA. If space permits and C333C104F5G5TA inventory is more readily available, either part delivers identical electrical performance.

Q: Can I use these parts interchangeably on existing PCBs?

A: Only if the PCB footprint and clearance accommodate the larger dimensions of C333C104F5G5TA. Verify that the body size (0.280" x 0.160") and seated height (0.400") do not interfere with adjacent components or board constraints before substitution.