BZD17C11P RVG Equivalent & Substitute Parts

Part Overview

The BZD17C11P RVG is an 11 V, 800 mW Zener diode manufactured by Taiwan Semiconductor Corporation in Surface Mount Sub SMA packaging. This component is classified as Active product status and is ROHS3 compliant. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are required for procurement, inventory management, or design flexibility across manufacturing sources.

Key Parameters

Parameter	Value
Voltage - Zener (Nom)	11 V
Power - Max	800 mW
Impedance (Max)	7 Ohms
Current - Reverse Leakage @ Vr	4 µA @ 8.2 V
Voltage - Forward (Vf) (Max) @ If	1.2 V @ 200 mA
Operating Temperature Range	-55°C ~ 175°C (TJ)
Mounting Type	Surface Mount
Package / Case	DO-219AB
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the BZD17C11P RVG are qualified based on the following electrical and mechanical parameters:

Critical Matching Parameters:

Voltage - Zener (Nom): 11 V
Power - Max: 800 mW
Impedance (Max): 7 Ohms
Current - Reverse Leakage @ Vr: 4 µA @ 8.2 V
Voltage - Forward (Vf) (Max) @ If: 1.2 V @ 200 mA
Package / Case: DO-219AB
Mounting Type: Surface Mount
RoHS Status: ROHS3 Compliant
Moisture Sensitivity Level: 1 (Unlimited)

The identified substitute parts BZD27C11P-E3-08 and BZD27C11P-M3-08, both manufactured by Vishay General Semiconductor - Diodes Division, meet all critical electrical specifications and mechanical requirements. Both substitutes operate within compatible temperature ranges and maintain equivalent functional performance for 11 V Zener diode applications.

Parameter Comparison

Parameter	BZD17C11P RVG	BZD27C11P-E3-08	BZD27C11P-M3-08
Manufacturer	Taiwan Semiconductor Corporation	Vishay General Semiconductor - Diodes Division	Vishay General Semiconductor - Diodes Division
Voltage - Zener (Nom)	11 V	11 V	11 V
Power - Max	800 mW	800 mW	800 mW
Impedance (Max)	7 Ohms	7 Ohms	7 Ohms
Current - Reverse Leakage @ Vr	4 µA @ 8.2 V	4 µA @ 8.2 V	4 µA @ 8.2 V
Voltage - Forward (Vf) (Max) @ If	1.2 V @ 200 mA	1.2 V @ 200 mA	1.2 V @ 200 mA
Operating Temperature Range	-55°C ~ 175°C	-65°C ~ 175°C	-65°C ~ 175°C
Mounting Type	Surface Mount	Surface Mount	Surface Mount
Package / Case	DO-219AB	DO-219AB	DO-219AB
Supplier Device Package	Sub SMA	DO-219AB (SMF)	DO-219AB (SMF)
Product Status	Active	Active	Active
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
REACH Status	REACH Unaffected	REACH Unaffected	REACH Unaffected

Engineering Selection Recommendations

Both BZD27C11P-E3-08 and BZD27C11P-M3-08 are qualified substitutes for the BZD17C11P RVG based on electrical parameter equivalence and mechanical compatibility. All three parts maintain Active product status and ROHS3 compliance. The substitute parts from Vishay General Semiconductor - Diodes Division provide extended lower operating temperature capability (-65°C versus -55°C), which represents an operational advantage in temperature-constrained applications. All parts are REACH Unaffected and classified under identical HTSUS and ECCN codes, confirming regulatory alignment. Selection between the main part and substitutes should be based on procurement availability, supply chain requirements, and manufacturing source preferences.

Frequently Asked Questions (FAQ)

Q: What electrical parameters must match for substitution of the BZD17C11P RVG?

A: The critical electrical parameters that must match are Zener voltage (11 V), maximum power dissipation (800 mW), impedance (7 Ohms maximum), reverse leakage current (4 µA @ 8.2 V), and forward voltage (1.2 V @ 200 mA). All identified substitutes meet these specifications.

Q: Are the substitute parts mechanically compatible with the BZD17C11P RVG?

A: Yes. All three parts use the DO-219AB package and Surface Mount mounting type. The BZD17C11P RVG is supplied as Sub SMA, while the Vishay substitutes are supplied as DO-219AB (SMF), but both designations refer to the same physical package standard.

Q: What is the temperature operating range difference between the main part and substitutes?

A: The BZD17C11P RVG operates from -55°C to 175°C, while both Vishay substitutes (BZD27C11P-E3-08 and BZD27C11P-M3-08) operate from -65°C to 175°C. The substitutes provide 10°C additional low-temperature capability.

Q: Are all parts RoHS compliant?

A: Yes. The BZD17C11P RVG and both substitute parts are ROHS3 compliant with Moisture Sensitivity Level 1 (Unlimited).

Q: What is the difference between BZD27C11P-E3-08 and BZD27C11P-M3-08?

A: Both parts are electrically and mechanically identical with matching specifications. The difference lies in packaging format: BZD27C11P-E3-08 has 4,300 pieces in stock, while BZD27C11P-M3-08 has 30,374 pieces in stock. The suffix designations (-E3-08 and -M3-08) indicate different manufacturing or distribution batches from Vishay.

Q: Can the BZD17C11P RVG be used interchangeably with the Vishay substitutes in existing designs?

A: Yes. All electrical parameters, package specifications, and compliance certifications are equivalent. Direct substitution is supported for applications requiring 11 V, 800 mW Zener diode functionality in DO-219AB Surface Mount packages.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message