BYT53A-TAP Equivalent & Substitute Parts

Part Overview

The BYT53A-TAP is an avalanche diode manufactured by Vishay General Semiconductor - Diodes Division, rated for 50V DC reverse voltage and 1.9A average rectified current in a SOD-57 axial through-hole package. This component is classified as Active and is RoHS3 compliant. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are required due to component availability, procurement lead times, or design flexibility within specified parameter tolerances.

Key Parameters

Parameter	Value	Unit
Voltage - DC Reverse (Vr) (Max)	50	V
Current - Average Rectified (Io)	1.9	A
Voltage - Forward (Vf) (Max) @ If	1.1 V @ 1 A	V
Reverse Recovery Time (trr)	50	ns
Current - Reverse Leakage @ Vr	5	µA @ 50 V
Speed Classification	Fast Recovery ≤ 500ns, > 200mA	-
Mounting Type	Through Hole	-
Package / Case	SOD-57, Axial	-
Operating Temperature - Junction	-55 to 175	°C
RoHS Status	ROHS3 Compliant	-

Substitute Part Grouping Explanation

Substitution of the BYT53A-TAP with the EGP20A is based on the following electrical and mechanical compatibility criteria:

Matching Parameters:

Voltage - DC Reverse (Vr) (Max): Both rated 50V
Reverse Recovery Time (trr): Both 50ns
Current - Reverse Leakage @ Vr: Both 5µA @ 50V
Speed Classification: Both Fast Recovery ≤ 500ns, > 200mA
Mounting Type: Both Through Hole
Technology: Both support fast recovery rectification

Allowable Variations:

Current - Average Rectified (Io): EGP20A rated 2A exceeds BYT53A-TAP 1.9A requirement
Voltage - Forward (Vf) (Max): EGP20A 950mV @ 2A is lower than BYT53A-TAP 1.1V @ 1A
Package / Case: EGP20A uses DO-15 (DO-204AC) versus BYT53A-TAP SOD-57; both are axial through-hole configurations with compatible lead spacing for standard PCB layouts

The EGP20A meets or exceeds the electrical performance requirements of the BYT53A-TAP within the specified parameter envelope.

Parameter Comparison

Parameter	BYT53A-TAP	EGP20A	Unit
Manufacturer	Vishay General Semiconductor	Fairchild Semiconductor	-
Voltage - DC Reverse (Vr) (Max)	50	50	V
Current - Average Rectified (Io)	1.9	2	A
Voltage - Forward (Vf) (Max) @ If	1.1 V @ 1 A	950 mV @ 2 A	V
Reverse Recovery Time (trr)	50	50	ns
Current - Reverse Leakage @ Vr	5 µA @ 50 V	5 µA @ 50 V	µA
Speed Classification	Fast Recovery ≤ 500ns, > 200mA	Fast Recovery ≤ 500ns, > 200mA	-
Mounting Type	Through Hole	Through Hole	-
Package / Case	SOD-57, Axial	DO-15, Axial	-
Operating Temperature - Junction	-55 to 175	-65 to 150	°C
Product Status	Active	Active	-
RoHS Status	ROHS3 Compliant	Not specified	-
REACH Status	REACH Unaffected	REACH Unaffected	-

Engineering Selection Recommendations

Both the BYT53A-TAP and EGP20A are Active status components with REACH Unaffected designation, confirming regulatory compliance for industrial applications. The EGP20A provides equivalent or superior electrical performance across all critical parameters: matching reverse voltage, reverse recovery time, and reverse leakage specifications while offering higher current capacity (2A versus 1.9A).

The primary consideration for selection is package compatibility. The BYT53A-TAP uses SOD-57 packaging while the EGP20A uses DO-15 packaging. Both are axial through-hole configurations; however, physical dimensions and lead spacing differ. PCB layout modifications may be required when substituting between these packages.

The BYT53A-TAP supports a higher maximum junction temperature range (-55°C to 175°C) compared to the EGP20A (-65°C to 150°C). Applications requiring operation above 150°C junction temperature require the BYT53A-TAP.

The BYT53A-TAP carries explicit RoHS3 compliance certification. The EGP20A RoHS status is not specified in available data.

Frequently Asked Questions (FAQ)

Q: Can the EGP20A directly replace the BYT53A-TAP without PCB modifications?

A: The EGP20A and BYT53A-TAP use different package types (DO-15 versus SOD-57). While both are axial through-hole diodes, physical dimensions and lead spacing differ. PCB layout evaluation is required to determine if existing footprints accommodate the EGP20A package geometry.

Q: What are the critical electrical parameters for substitution?

A: Substitution is valid when the following parameters are met or exceeded: Voltage - DC Reverse (Vr) minimum 50V, Current - Average Rectified (Io) minimum 1.9A, Reverse Recovery Time (trr) maximum 50ns, and Current - Reverse Leakage @ Vr maximum 5µA @ 50V. The EGP20A satisfies all these criteria.

Q: Does the EGP20A meet RoHS compliance requirements?

A: The EGP20A REACH status is confirmed as REACH Unaffected. RoHS compliance status for the EGP20A is not specified in the provided data. Applications with explicit RoHS3 requirements should confirm EGP20A certification status with the manufacturer or supplier.

Q: What is the temperature operating range difference between these parts?

A: The BYT53A-TAP operates from -55°C to 175°C junction temperature, while the EGP20A operates from -65°C to 150°C. Applications requiring sustained operation above 150°C junction temperature must use the BYT53A-TAP.

Q: Are there differences in forward voltage characteristics?

A: The BYT53A-TAP specifies 1.1V forward voltage at 1A, while the EGP20A specifies 950mV at 2A. The EGP20A exhibits lower forward voltage drop at higher current levels, which may reduce power dissipation in high-current applications.

Q: What inventory considerations apply to these parts?

A: The BYT53A-TAP has 10,160 pieces in stock (Tape & Box packaging). The EGP20A has 24,846 pieces in stock (Bulk packaging). Packaging format differences may affect procurement timelines and handling requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message