Equivalent & Substitute Parts for BC808-16-TP

Part Overview

The BC808-16-TP is a PNP bipolar junction transistor (BJT) produced by Micro Commercial Co. It is designed for interface applications, offering a collector current of 800 mA, a maximum collector-emitter voltage of 25 V, a maximum power dissipation of 300 mW, and transition frequency of 170 MHz. The device is housed in a surface mount SOT-23 package and supports an operating temperature range of -65°C to 150°C. The BC808-16-TP has a part status of "Last Time Buy," indicating it is being phased out and necessitating the identification of directly compatible equivalents or substitute models.

Substiute Parts

BC808-16-TP

Micro Commercial CoIn Stock: 1087BC808-16-TP Datasheet

Current PartRFQ

BC808-16-TP

Micro Commercial CoIn Stock: 1087BC808-16-TP Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the BC808-16-TP are identified based strictly on matching the following parameters: transistor type (PNP), maximum collector current (800 mA), maximum collector-emitter voltage (25 V), Vce saturation voltage, collector cutoff current, DC current gain (hFE), power dissipation (300 mW), transition frequency (170 MHz), operating temperature range, mounting type (surface mount), and package equivalence (SOT-23 and variant codes). Only parts meeting all these parameters are considered as equivalent substitutes.

Parameter Comparison

Engineering Selection Recommendations

Selection among substitute transistors in this product category requires verification of part status, REACH status, ECCN, and HTSUS classifications. All listed substitutes for BC808-16-TP are REACH unaffected and classified under ECCN EAR99 and HTSUS 8541.21.0075, matching regulatory and compliance attributes.

Frequently Asked Questions (FAQ)

Q1: What parameters must match to select a substitute for the BC808-16-TP bipolar transistor?
A1: Required parameters are transistor type (PNP), maximum collector current, maximum collector-emitter voltage, Vce saturation voltage, collector cutoff current, DC current gain, power dissipation, transition frequency, operating temperature range, and package type.

Q2: Are mechanical package codes critical for substituting the BC808-16-TP?
A2: Yes, equivalent package types such as SOT-23, TO-236-3, and SC-59 must be used to ensure direct compatibility with automated assembly and board layout.

Q3: What regulatory status should be checked before selecting a substitute?
A3: REACH status, ECCN, and HTSUS classifications must be reviewed for compliance in the intended application and supply chain.

Q4: Is it possible to use another PNP BJT as a substitute without matching all parameters?
A4: Only parts providing exact matches in the specified electrical and mechanical parameters are permissible as substitutes for BC808-16-TP in this reference.