BA178M12FP-E2 Equivalent & Substitute Parts

Part Overview

The BA178M12FP-E2 is a linear voltage regulator IC manufactured by Rohm Semiconductor, designed to provide a fixed 12V positive output at 500mA. This Surface Mount device in TO-252-3 (DPAK) packaging is classified as Active product status and is ROHS3 compliant. Substitute parts are necessary when the primary part experiences supply constraints, extended lead times, or when design requirements necessitate alternative electrical characteristics such as higher output current capacity or enhanced protection features.

Key Parameters

Parameter	BA178M12FP-E2
Manufacturer	Rohm Semiconductor
Output Voltage (Fixed)	12V
Output Current	500mA
Input Voltage (Max)	27V
Voltage Dropout (Max)	2V @ 500mA
Package / Case	TO-252-3, DPAK
Mounting Type	Surface Mount
Operating Temperature	-40°C ~ 85°C
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution eligibility for the BA178M12FP-E2 is determined by the following critical parameters:

Fixed output voltage of 12V
Surface Mount DPAK (TO-252-3) package compatibility
Positive output configuration
Single regulator output
ROHS3 compliance

Substitute parts must maintain identical output voltage (12V) and package form factor (TO-252-3 DPAK). Output current capacity may exceed the primary part specification (500mA minimum). Input voltage maximum ratings and dropout voltage characteristics may vary within acceptable design margins. Operating temperature range and protection features are secondary considerations that may differ based on application requirements.

Parameter Comparison

Parameter	BA178M12FP-E2	L78M12ABDT-TR	TL750M12CKVURG3	TL750M12QKVURQ1	UA78M12CKVURG3
Manufacturer	Rohm Semiconductor	STMicroelectronics	Texas Instruments	Texas Instruments	Texas Instruments
Output Voltage	12V	12V	12V	12V	12V
Output Current	500mA	500mA	750mA	750mA	500mA
Input Voltage (Max)	27V	35V	26V	26V	30V
Voltage Dropout (Max)	2V @ 500mA	Not Specified	0.6V @ 750mA	0.6V @ 750mA	2V @ 350mA
Package / Case	TO-252-3, DPAK	TO-252-3, DPAK	TO-252-3, DPAK	TO-252-3, DPAK	TO-252-3, DPAK
Operating Temperature	-40°C ~ 85°C	-40°C ~ 125°C	0°C ~ 125°C	-40°C ~ 125°C	0°C ~ 125°C
Protection Features	Not Specified	Over Current, Over Temperature, Short Circuit	Over Current, Over Temperature, Over Voltage, Reverse Polarity	Over Current, Over Temperature, Over Voltage, Reverse Polarity	Over Current, Over Temperature, Short Circuit
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Product Status	Active	Active	Active	Active	Active

Engineering Selection Recommendations

All listed substitute parts maintain Active product status and ROHS3 compliance, ensuring regulatory alignment with the primary BA178M12FP-E2 device.

L78M12ABDT-TR (STMicroelectronics) provides direct electrical equivalence at 500mA output current with extended input voltage tolerance (35V maximum). This part is suitable for applications requiring higher input voltage headroom.

TL750M12CKVURG3 and TL750M12QKVURQ1 (Texas Instruments) offer increased output current capacity at 750mA with superior dropout voltage performance (0.6V @ 750mA). TL750M12QKVURQ1 includes automotive-grade qualification (AEC-Q100) and extended operating temperature range (-40°C ~ 125°C), making it appropriate for automotive and industrial applications. TL750M12CKVURG3 operates within 0°C ~ 125°C range.

UA78M12CKVURG3 (Texas Instruments) maintains 500mA output current specification with enhanced PSRR performance (80dB at 120Hz) and higher input voltage rating (30V maximum). Operating temperature range is 0°C ~ 125°C.

Frequently Asked Questions (FAQ)

Q: Can I use a substitute part with higher output current (750mA) in place of the 500mA BA178M12FP-E2?

A: Yes. Higher output current capacity is a superset of the original specification. The TL750M12 series devices provide 750mA capability and are electrically compatible. Circuit design must account for thermal management differences due to increased current handling capability.

Q: Are all substitute parts in the same package?

A: Yes. All listed substitute parts use TO-252-3 DPAK packaging, ensuring mechanical and thermal compatibility with the BA178M12FP-E2 footprint.

Q: What is the significance of the voltage dropout specification difference?

A: Dropout voltage determines the minimum input-to-output voltage differential required for proper regulation. The BA178M12FP-E2 specifies 2V dropout at 500mA. TL750M12 series devices specify 0.6V dropout at 750mA, indicating superior low-dropout performance. UA78M12CKVURG3 specifies 2V dropout at 350mA. Lower dropout voltage allows operation with lower input voltages or provides better efficiency in power-constrained applications.

Q: Which substitute part is recommended for automotive applications?

A: TL750M12QKVURQ1 is qualified to AEC-Q100 automotive standards and operates across -40°C ~ 125°C temperature range, making it suitable for automotive-grade designs.

Q: Do all substitute parts provide the same protection features?

A: No. The BA178M12FP-E2 protection features are not specified. L78M12ABDT-TR and UA78M12CKVURG3 provide Over Current, Over Temperature, and Short Circuit protection. TL750M12 series devices provide Over Current, Over Temperature, Over Voltage, and Reverse Polarity protection, offering enhanced circuit protection.

Q: What is the difference between Cut Tape (CT) and Tape & Reel (TR) packaging?

A: Both are surface mount delivery formats. Tape & Reel (TR) is suitable for high-volume automated assembly. Cut Tape (CT) and Digi-Reel are appropriate for lower-volume or prototype applications. Electrical and thermal characteristics remain identical.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message