AWLP-34/3.2-T-R Equivalent & Substitute Parts

Part Overview

The AWLP-34/3.2-T-R is a 34-position ribbon cable DIP header connector manufactured by Assmann WSW Components. This through-hole mounted connector features IDC (Insulation Displacement Contact) termination and is designed for applications requiring dual-row ribbon cable connectivity with 0.050" cable pitch and 0.100" board-side pitch spacing.

The AWLP-34/3.2-T-R is classified as obsolete. Equivalent substitute parts are available from the same manufacturer in active product status, as well as from alternative manufacturers offering compatible specifications.

Substiute Parts

AWLP-34/3.2-T-R

Assmann WSW ComponentsIn Stock: 1019AWLP-34/3.2-T-R Datasheet

Current PartRFQ

AWLP 34/3,2-T

Assmann WSW ComponentsIn Stock: 779AWLP 34/3,2-T Datasheet

DirectRFQ

7834-0000PR

3MIn Stock: 9897834-0000PR Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the AWLP-34/3.2-T-R are qualified based on the following critical parameters that must match or exceed the original specification:

• Connector type: Ribbon Cable, DIP Header
• Number of positions: 34
• Number of rows: 2
• Cable pitch: 0.050" (1.27mm)
• Board-side pitch: 0.100" (2.54mm)
• Row spacing: 0.100" (2.54mm)
• Mounting type: Through Hole
• Cable termination: IDC
• Features: Feed Through
• Number of positions loaded: All

Substitutes are grouped into two categories: direct manufacturer equivalents from Assmann WSW Components, and cross-manufacturer alternatives from 3M that maintain identical mechanical and electrical interface specifications.

Parameter Comparison

Engineering Selection Recommendations

The AWLP 34/3,2-T from Assmann WSW Components is the primary substitute for the obsolete AWLP-34/3.2-T-R. Both parts are manufactured by the same supplier and maintain identical specifications across all critical parameters. The AWLP 34/3,2-T is in active product status and carries ROHS3 compliance certification.

The 7834-0000PR from 3M is a qualified cross-manufacturer substitute that maintains mechanical and electrical interface compatibility. The primary difference is the contact finish specification: the 3M part features gold plating with flash thickness, compared to tin finish on the Assmann parts. The 3M part is also in active product status with ROHS3 compliance certification and supports multiple wire gauge options (26 AWG stranded, 28 AWG solid or stranded, 30 AWG solid).

Both substitute parts are REACH unaffected and carry identical ECCN and HTSUS classifications as the original part.

Frequently Asked Questions (FAQ)

Q: Can the AWLP 34/3,2-T directly replace the AWLP-34/3.2-T-R?

A: Yes. The AWLP 34/3,2-T maintains identical mechanical and electrical specifications. The primary difference is product status (active versus obsolete) and packaging format (tray versus original packaging).

Q: What is the difference between the Assmann and 3M substitutes?

A: Both parts are mechanically and electrically compatible. The 3M 7834-0000PR features gold-plated contacts with flash thickness, while the Assmann AWLP 34/3,2-T uses tin finish. The 3M part also specifies multiple compatible wire gauge options.

Q: Are there packaging differences between these parts?

A: Yes. The AWLP 34/3,2-T is supplied in tray packaging, while the 7834-0000PR is supplied in bulk packaging. Original packaging for the AWLP-34/3.2-T-R is not specified in the available data.

Q: Do all three parts meet current compliance requirements?

A: The AWLP 34/3,2-T and 7834-0000PR are both ROHS3 compliant. All three parts are REACH unaffected. Compliance status for the original AWLP-34/3.2-T-R is not specified.

Q: What determines substitution compatibility for this connector type?

A: Substitution compatibility is determined by matching connector type, position count, row configuration, cable pitch, board-side pitch, row spacing, mounting type, cable termination method, and contact loading. All three parts meet these criteria.