AP130-18YRG-13 Equivalent & Substitute Parts

Part Overview

The AP130-18YRG-13 is a linear voltage regulator IC manufactured by Diodes Incorporated, designed for positive fixed 1.8V output applications with 300mA current capacity. This Surface Mount device in SOT-89R-3 packaging is classified as Active product status and is ROHS3 compliant. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are maintained across the allowed parameter set for this Power Management (PMIC) category.

Substiute Parts

AP130-18YRG-13

Diodes IncorporatedIn Stock: 7922AP130-18YRG-13 Datasheet

Current PartRFQ

AP130-18YG-13

Diodes IncorporatedIn Stock: 12953AP130-18YG-13 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the AP130-18YRG-13 is determined by strict equivalence across the following critical parameters:

• Output voltage specification: 1.8V fixed
• Output current capacity: 300mA
• Maximum input voltage: 5.5V
• Voltage dropout: 0.5V @ 300mA
• Quiescent current: 100 µA
• PSRR performance: 58dB (100Hz)
• Operating temperature range: -40°C ~ 85°C
• Protection features: Over Current, Over Temperature, Short Circuit
• Regulatory compliance: ROHS3 Compliant
• Packaging compatibility: TO-243AA case with SOT-89 series pinout

The AP130-18YG-13 meets all these criteria and is classified as a parametric equivalent. The primary distinction is the supplier device package designation (SOT-89-3 versus SOT-89R-3), which reflects packaging format differences within the same TO-243AA case family.

Parameter Comparison

Engineering Selection Recommendations

Both the AP130-18YRG-13 and AP130-18YG-13 are Active product status components manufactured by Diodes Incorporated with identical electrical specifications and ROHS3 compliance. Selection between these parts is based on packaging format availability and supply chain requirements. The SOT-89R-3 variant (tape and reel format) and SOT-89-3 variant represent standard packaging options within the TO-243AA case family. Both parts maintain equivalent thermal and electrical performance across the specified operating temperature range of -40°C to 85°C. Regulatory compliance status (ROHS3, REACH Unaffected, EAR99) is identical for both variants.

Frequently Asked Questions (FAQ)

Q: Are AP130-18YRG-13 and AP130-18YG-13 electrically interchangeable?

A: Yes. Both parts deliver identical electrical performance: 1.8V fixed output, 300mA current capacity, 0.5V maximum dropout at rated current, 100 µA quiescent current, and 58dB PSRR at 100Hz. Protection features (Over Current, Over Temperature, Short Circuit) are identical.

Q: What is the difference between SOT-89R-3 and SOT-89-3 packaging?

A: Both designations refer to variants within the TO-243AA case family. The primary distinction is the packaging format: SOT-89R-3 indicates tape and reel format, while SOT-89-3 represents the standard SOT-89 package variant. Pin configuration and PCB footprint remain compatible.

Q: Can I substitute AP130-18YG-13 for AP130-18YRG-13 in production?

A: Yes, provided your assembly process accommodates the packaging format. Both parts are Active status, ROHS3 compliant, and maintain identical electrical specifications and thermal performance across the -40°C to 85°C operating range.

Q: Are there any compliance differences between these parts?

A: No. Both parts carry identical regulatory certifications: ROHS3 Compliant, REACH Unaffected, and EAR99 classification.

Q: What determines substitution eligibility for this regulator?

A: Substitution is valid when the alternative part maintains: fixed 1.8V output, 300mA current capacity, 5.5V maximum input voltage, 0.5V dropout specification, 100 µA quiescent current, 58dB PSRR, -40°C to 85°C operating range, and identical protection features. Package compatibility within the TO-243AA case family is required.