AMC60MMSD Card Edge Connector Equivalent & Substitute Parts

Part Overview

The AMC60MMSD is a 120-position male card edge connector manufactured by Sullins Connector Solutions, designed to interface with female edgecards using a 0.100" (2.54mm) pitch. This connector features dual read-out configuration, gold-plated beryllium copper contacts, and operates across a temperature range of -65°C to 200°C. The AMC60MMSD is classified as obsolete, necessitating identification of active equivalent components for new designs and ongoing production requirements. Substitute parts must maintain electrical and mechanical compatibility while offering current product availability.

Substiute Parts

AMC60MMSD

Sullins Connector SolutionsIn Stock: 990AMC60MMSD Datasheet

Current PartRFQ

RMC60MMSD

Sullins Connector SolutionsIn Stock: 983RMC60MMSD Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete AMC60MMSD with the active RMC60MMSD is based on the following critical parameters that determine functional compatibility:

Electrical Compatibility Parameters:

• Number of positions (120 total, 60 per row, 2 rows)
• Pitch spacing (0.100" / 2.54mm)
• Gender (Male)
• Read-out configuration (Dual)
• Termination method (Solder)
• Contact finish specification (Gold, 30.0µin thickness)
• Operating temperature range (-65°C ~ 200°C)
• Insulation material (Polyphenylene Sulfide)

Mechanical Compatibility Parameters:

• Flange mounting type (Flush Mount)
• Flange diameter (0.125" / 3.18mm)
• Card edge interface (Fits Female Edgecards)

The RMC60MMSD maintains all critical electrical and mechanical parameters required for direct substitution. Variations in contact material (phosphor bronze vs. beryllium copper), flange opening orientation (top opening vs. side opening), mounting type designation (through hole vs. unspecified), and color (black vs. unspecified) do not affect functional compatibility within the specified electrical and mechanical constraints.

Parameter Comparison

Engineering Selection Recommendations

The RMC60MMSD is the direct active substitute for the obsolete AMC60MMSD. Both components are manufactured by Sullins Connector Solutions and maintain identical electrical specifications across all critical parameters: 120-position configuration, 0.100" pitch, dual read-out, solder termination, gold contact finish at 30.0µin thickness, and -65°C to 200°C operating temperature range.

Both parts satisfy ROHS3 compliance and REACH unaffected status, ensuring regulatory alignment for current production environments. The RMC60MMSD is currently in active production with 943 pieces available in inventory, compared to the obsolete AMC60MMSD status.

The RMC60MMSD is suitable for direct replacement in applications requiring 120-position male card edge connectors with the specified electrical and mechanical characteristics. No design modifications are required for substitution.

Frequently Asked Questions (FAQ)

Q: Can the RMC60MMSD directly replace the AMC60MMSD in existing designs?

A: Yes. The RMC60MMSD maintains all critical electrical and mechanical parameters required for direct substitution, including position count, pitch, gender, read-out configuration, termination method, contact finish specification, operating temperature range, and insulation material.

Q: What is the difference between the flange opening orientations (side opening vs. top opening)?

A: The AMC60MMSD features side opening flange orientation, while the RMC60MMSD features top opening orientation. Both maintain the same flush mount configuration and 0.125" (3.18mm) diameter specification. The opening orientation difference does not affect electrical compatibility or card edge interface functionality.

Q: Are there differences in contact material between these parts?

A: The AMC60MMSD uses beryllium copper contacts, while the RMC60MMSD uses phosphor bronze contacts. Both materials are plated with gold at 30.0µin (0.76µm) thickness. Both contact materials are suitable for the specified operating temperature range and electrical requirements.

Q: Do both parts meet current regulatory requirements?

A: Yes. Both the AMC60MMSD and RMC60MMSD are ROHS3 compliant and REACH unaffected, meeting current regulatory standards for electronic components.

Q: What is the card thickness specification for the RMC60MMSD?

A: The RMC60MMSD is specified for 0.062" (1.57mm) card thickness. This specification is provided for the substitute part and should be verified against your application requirements.

Q: Are both parts suitable for solder termination processes?

A: Yes. Both the AMC60MMSD and RMC60MMSD use solder termination and are compatible with standard PCB assembly processes.