AMC29MWST Equivalent & Substitute Parts

Part Overview

The AMC29MWST is a 58-position male card edge connector manufactured by Sullins Connector Solutions. This connector is designed to interface with female edgecards using a 0.100" (2.54mm) pitch configuration with dual read-out capability. The part features beryllium copper contacts with gold plating and operates across a temperature range of -65°C to 200°C. The AMC29MWST is classified as obsolete, necessitating identification of active equivalent components to maintain design continuity and ensure ongoing component availability for production and field service applications.

Substiute Parts

AMC29MWST

Sullins Connector SolutionsIn Stock: 999AMC29MWST Datasheet

Current PartRFQ

RMC29MWST

Sullins Connector SolutionsIn Stock: 997RMC29MWST Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete AMC29MWST requires identification of active card edge connector components from Sullins Connector Solutions that maintain functional and electrical compatibility. The primary substitution candidate is the RMC29MWST, which shares the same base product number designation (RMC29 versus AMC29) and is manufactured by the same supplier.

The substitution logic is based on the following critical parameters that determine compatibility:

• Connector Category: Both parts are card edge connectors
• Position Count: 58 positions maintained
• Row Configuration: 2-row design
• Pitch Specification: 0.100" (2.54mm) standard
• Regulatory Compliance: Both parts maintain ROHS3 compliance and REACH unaffected status
• Moisture Sensitivity: Both parts classified as MSL 1 (Unlimited)
• Manufacturer Consistency: Both manufactured by Sullins Connector Solutions

The RMC29MWST represents the active product line evolution from the obsolete AMC29MWST series, providing direct functional replacement capability for card edge connector applications requiring 58-position, dual-row, 0.100" pitch male connectors.

Parameter Comparison

Engineering Selection Recommendations

The RMC29MWST is the appropriate substitute for the obsolete AMC29MWST based on the following engineering criteria:

Product Status Alignment: The AMC29MWST is classified as obsolete, creating supply chain risk for ongoing production and field service requirements. The RMC29MWST maintains active product status with current manufacturing availability, ensuring long-term component sourcing capability.

Regulatory Compliance Continuity: Both components maintain ROHS3 compliance and REACH unaffected status, ensuring that substitution does not introduce regulatory compliance gaps in manufacturing or end-use applications.

Moisture Sensitivity Consistency: Both parts are classified as MSL 1 (Unlimited), indicating identical moisture handling and storage requirements, eliminating the need for modified component management procedures.

Functional Parameter Preservation: The RMC29MWST maintains the critical functional parameters of the AMC29MWST, including 58-position configuration, 2-row design, and 0.100" (2.54mm) pitch specification. These parameters ensure mechanical and electrical compatibility with existing female edgecard interfaces.

Manufacturer Continuity: Both components are manufactured by Sullins Connector Solutions, maintaining design consistency and quality standards within the same product ecosystem.

Frequently Asked Questions (FAQ)

Q: What is the primary reason for substituting the AMC29MWST?

A: The AMC29MWST is classified as obsolete. The RMC29MWST is the active equivalent component from Sullins Connector Solutions, providing continued availability and manufacturing support for 58-position, dual-row, 0.100" pitch card edge connector applications.

Q: Are the AMC29MWST and RMC29MWST mechanically compatible?

A: Both components are 58-position, 2-row card edge connectors with 0.100" (2.54mm) pitch specification. The mechanical compatibility is established through these shared dimensional and positional parameters.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both the AMC29MWST and RMC29MWST maintain ROHS3 compliance and REACH unaffected status, ensuring equivalent regulatory standing for manufacturing and end-use applications.

Q: What is the moisture sensitivity classification for both parts?

A: Both components are classified as MSL 1 (Unlimited), indicating no moisture sensitivity restrictions and identical storage and handling requirements.

Q: Are there any differences in contact material or finish specifications between the two parts?

A: Contact material and finish specifications are not provided in the available data for the RMC29MWST. Detailed contact specifications should be verified through the manufacturer's current technical documentation for the RMC29MWST to confirm equivalence with the AMC29MWST beryllium copper contacts with gold plating.

Q: What is the operational temperature range for the substitute part?

A: Operating temperature range specifications are not provided in the available data for the RMC29MWST. Temperature operating specifications should be confirmed through the manufacturer's current technical documentation.

Q: Can the RMC29MWST be used as a direct replacement in existing designs?

A: The RMC29MWST shares the critical functional parameters (58 positions, 2 rows, 0.100" pitch) with the AMC29MWST. Substitution suitability for specific applications should be confirmed by comparing complete technical specifications of both components, particularly regarding contact materials, finish specifications, and operating temperature ranges.