AMC18MWST Equivalent & Substitute Parts

Part Overview

The AMC18MWST is a 36-position male card edge connector manufactured by Sullins Connector Solutions. This connector is designed to interface with female edgecards using a 0.100" (2.54mm) pitch configuration with dual read-out capability. The part features beryllium copper contacts with gold plating and operates across a temperature range of -65°C to 200°C.

The AMC18MWST is classified as obsolete. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production and maintenance requirements for systems utilizing this connector type.

Substiute Parts

AMC18MWST

Sullins Connector SolutionsIn Stock: 1067AMC18MWST Datasheet

Current PartRFQ

RMC18MWST

Sullins Connector SolutionsIn Stock: 745RMC18MWST Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the AMC18MWST is determined by alignment of the following critical parameters:

Primary Substitution Criteria:

• Manufacturer: Sullins Connector Solutions
• Category: Card Edge Connectors
• Number of Positions: 36
• Number of Rows: 2
• Pitch: 0.100" (2.54mm)
• Contact Material: Beryllium Copper
• Contact Finish: Gold
• Operating Temperature Range: -65°C ~ 200°C
• Material - Insulation: Polyphenylene Sulfide (PPS)
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Status: REACH Unaffected

The RMC18MWST is identified as a direct manufacturer substitute. Both parts are manufactured by Sullins Connector Solutions and share the same base product number designation (18-position configuration). The RMC18MWST maintains active product status and full regulatory compliance, making it suitable for applications previously served by the obsolete AMC18MWST.

Parameter Comparison

Engineering Selection Recommendations

The RMC18MWST is the appropriate substitute for the obsolete AMC18MWST based on the following factors:

Product Status Alignment: The RMC18MWST maintains active product status with current manufacturing support, ensuring long-term availability and supply chain continuity compared to the obsolete AMC18MWST.

Regulatory Compliance: Both parts maintain ROHS3 compliance and REACH unaffected status, satisfying current environmental and regulatory requirements. The RMC18MWST carries EAR99 export classification, providing clear regulatory positioning for international applications.

Manufacturer Continuity: Both connectors are manufactured by Sullins Connector Solutions, ensuring consistent design philosophy, quality standards, and technical support.

Inventory Availability: The RMC18MWST is currently available with 713 pieces in stock, providing immediate procurement capability for new designs and replacement applications.

Frequently Asked Questions (FAQ)

Q: What is the primary reason for substituting the AMC18MWST?

A: The AMC18MWST is classified as obsolete. The RMC18MWST is the active equivalent from the same manufacturer, ensuring continued availability and manufacturing support.

Q: Are the AMC18MWST and RMC18MWST mechanically compatible?

A: Both parts are 36-position male card edge connectors manufactured by Sullins Connector Solutions with 0.100" (2.54mm) pitch configuration. They share the same base product number series (18-position designation), indicating mechanical and electrical compatibility within the card edge connector interface standard.

Q: Do both parts meet current regulatory requirements?

A: Yes. Both the AMC18MWST and RMC18MWST are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory standards.

Q: What is the operating temperature range for the substitute part?

A: The operating temperature range for the AMC18MWST is -65°C to 200°C. Specific operating temperature data for the RMC18MWST was not provided in the available technical parameters.

Q: Is the RMC18MWST available for immediate procurement?

A: Yes. The RMC18MWST is in active product status with 713 pieces currently in stock.

Q: What is the difference between the base product numbers AMC18 and RMC18?

A: The base product numbers indicate different connector series within the Sullins product line. The RMC18 series represents the current active generation, while the AMC18 series is obsolete. Both maintain the same 18-position configuration and 36-position total connector specification.