AM50066C33-A Equivalent & Substitute Parts

Part Overview

The AM50066C33-A is a SPST-NO (Single Pole Single Throw - Normally Open) snap-action switch manufactured by Panasonic Electric Works. This chassis-mount switch is rated for 0.1A at 125V AC and 30V DC, featuring a lever roller actuator with quick connect termination. The product is currently obsolete, making identification of suitable substitute components essential for ongoing maintenance, repair, and design continuity in applications requiring equivalent switching functionality.

Substiute Parts

AM50066C33-A

Panasonic Electric WorksIn Stock: 835AM50066C33-A Datasheet

Current PartRFQ

ABV1236619

Panasonic Electric WorksIn Stock: 998ABV1236619 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the AM50066C33-A is determined by the following critical parameters:

Circuit Configuration & Function: Both the main part and substitute must maintain SPST-NO circuit topology with Off-Mom (momentary) switching function to preserve electrical behavior in the application.

Electrical Ratings: The substitute must support the required voltage and current specifications. The AM50066C33-A operates at 125V AC / 30V DC with 100mA current capacity. Substitute parts with equal or higher ratings in both AC and DC domains are electrically compatible.

Mechanical Interface: Chassis mount configuration with lever roller actuator and quick connect 0.187" (4.7mm) termination must be maintained for physical installation compatibility.

Operating Characteristics: Operating position, pretravel, differential travel, and overtravel dimensions define the mechanical response profile. Substitutes with identical or functionally equivalent mechanical travel specifications preserve switch behavior.

Environmental Performance: Operating temperature range and cycle life ratings must meet or exceed the original specification to ensure reliability in the intended application environment.

The ABV1236619 qualifies as a substitute based on matching circuit configuration (SPST-NO), switch function (Off-Mom), mounting type (Chassis Mount), actuator type (Lever, Roller), and termination style (Quick Connect - 0.187"). The substitute provides enhanced electrical ratings (3A at 250V AC) and improved environmental protection (IP50), making it suitable for applications where the original part is no longer available.

Parameter Comparison

Engineering Selection Recommendations

The ABV1236619 is the identified substitute for the obsolete AM50066C33-A. Selection of this substitute is based on the following engineering criteria:

Product Status & Availability: The AM50066C33-A is obsolete, making the active-status ABV1236619 the appropriate replacement for ongoing procurement and system support.

Electrical Compatibility: The ABV1236619 provides superior electrical ratings (3A at 250V AC versus 100mA at 125V AC), ensuring the substitute can handle the original application's electrical load with margin. Both parts maintain SPST-NO circuit topology and Off-Mom switching function.

Mechanical Compatibility: Identical operating position (0.815"), pretravel (0.125"), and actuator configuration (Lever, Roller) ensure mechanical behavior is preserved. Both parts use chassis mount installation with quick connect 0.187" termination.

Compliance & Environmental Protection: The ABV1236619 is RoHS Compliant and provides IP50 ingress protection, meeting modern regulatory requirements. The substitute's operating temperature range (-40°C to 85°C) covers the lower end of the original specification, though the upper limit is reduced by 20°C.

Cycle Life Consideration: The ABV1236619 mechanical life rating (5,000,000 cycles) is lower than the original part (10,000,000 cycles). Applications requiring the full 10,000,000-cycle specification should evaluate this difference against actual duty cycle requirements.

Frequently Asked Questions (FAQ)

Q: Can the ABV1236619 directly replace the AM50066C33-A in existing applications?

A: Yes, for applications operating within the ABV1236619 specifications. Both parts share identical circuit configuration (SPST-NO), switch function (Off-Mom), mounting type (Chassis Mount), actuator type (Lever, Roller), and mechanical travel dimensions. The substitute's higher electrical ratings (3A at 250V AC) provide compatibility with the original 100mA at 125V AC requirement. Verify that your application's operating temperature does not exceed 85°C, as the substitute's upper limit is 20°C lower than the original.

Q: What are the key differences between these two parts?

A: The primary differences are: (1) Current and voltage ratings—the ABV1236619 is rated for 3A at 250V AC compared to 100mA at 125V AC; (2) Operating temperature range—the substitute operates from -40°C to 85°C versus -25°C to 105°C; (3) Mechanical life—5,000,000 cycles versus 10,000,000 cycles; (4) Ingress protection—the substitute provides IP50 dust protection; (5) Termination options—the substitute offers both solder and quick connect termination; (6) Product status—the substitute is active while the original is obsolete.

Q: Are there any compatibility concerns with the termination style?

A: Both parts support quick connect 0.187" (4.7mm) termination, ensuring direct compatibility with existing harnesses and connectors. The ABV1236619 additionally offers solder termination as an option, providing flexibility for different assembly methods.

Q: Does the lower mechanical life rating of the ABV1236619 affect substitution suitability?

A: The ABV1236619 mechanical life rating of 5,000,000 cycles is lower than the original 10,000,000 cycles. For applications with high-cycle-count requirements, evaluate whether the actual duty cycle exceeds 5,000,000 cycles over the component's service life. For typical intermittent or moderate-duty applications, the substitute's mechanical life is adequate.

Q: Is the ABV1236619 RoHS compliant?

A: Yes, the ABV1236619 is RoHS Compliant, meeting current environmental and regulatory requirements for electronic component manufacturing and use.

Q: What is the significance of the IP50 ingress protection rating on the ABV1236619?

A: IP50 (Dust Protected) indicates the substitute provides protection against dust ingress, improving reliability in environments with airborne particulates. The original AM50066C33-A does not specify an ingress protection rating. This enhancement makes the substitute suitable for applications in dusty or contaminated environments.