ADTSM65RV Equivalent & Substitute Parts

Part Overview

The ADTSM65RV is an SPST-NO tactile switch manufactured by APEM Inc., designed for surface mount applications with a 0.05A contact rating at 12VDC. This component is classified as Active product status and is fully RoHS3 compliant. Substitute parts are identified when equivalent electrical specifications, mechanical compatibility, and regulatory compliance align with the original component, enabling seamless integration in PCB designs where packaging or sourcing constraints necessitate alternative suppliers.

Substiute Parts

ADTSM65RV

APEM Inc.In Stock: 1043ADTSM65RV Datasheet

Current PartRFQ

95C06B4GWT

Grayhill Inc.In Stock: 80995C06B4GWT Datasheet

SimilarRFQ

95C06D4GWRT

Grayhill Inc.In Stock: 114095C06D4GWRT Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ADTSM65RV are qualified based on strict alignment with the following critical parameters:

• Electrical Equivalence: SPST-NO circuit configuration with 0.05A @ 12VDC contact rating
• Mechanical Compatibility: Surface mount gull wing termination with 6.20mm x 6.20mm outline
• Functional Parameters: 260gf operating force, 0.25mm switch travel, momentary switch function
• Environmental Specifications: -25°C ~ 70°C operating temperature range
• Regulatory Compliance: RoHS3 compliant, REACH unaffected status

The substitute parts identified (95C06B4GWT and 95C06D4GWRT) from Grayhill Inc. meet all electrical and mechanical requirements. Differentiation between substitutes is based on actuator height and packaging format, not functional performance.

Parameter Comparison

Engineering Selection Recommendations

Both Grayhill substitutes (95C06B4GWT and 95C06D4GWRT) are functionally equivalent to the ADTSM65RV for electrical and mechanical performance. Selection between alternatives depends on application-specific constraints:

95C06D4GWRT provides direct mechanical equivalence with the ADTSM65RV, matching the 9.50mm actuator height. This substitute is appropriate for designs where actuator profile is a critical factor. Tape & Reel packaging supports high-volume automated assembly.

95C06B4GWT offers the same electrical and functional specifications but with a reduced 5.00mm actuator height. This configuration is suitable for space-constrained applications where lower profile actuation is beneficial. Tube packaging accommodates lower-volume or manual assembly processes.

All three parts maintain Active product status, full RoHS3 compliance, and REACH unaffected regulatory standing. Mechanical life data is provided for Grayhill parts (500,000 cycles), supporting reliability assessment for high-cycle applications.

Frequently Asked Questions (FAQ)

Q: Can 95C06B4GWT replace ADTSM65RV in all applications?

A: Electrical and functional compatibility is complete. The primary difference is actuator height: 5.00mm versus 9.50mm. Applications with height constraints benefit from the lower profile. PCB layout and enclosure clearance must be evaluated for each design.

Q: What is the significance of the different packaging formats?

A: ADTSM65RV is supplied in Bulk format. 95C06B4GWT uses Tube packaging, and 95C06D4GWRT uses Tape & Reel format. Packaging selection aligns with assembly volume and automation requirements. Electrical and mechanical performance is independent of packaging.

Q: Are the Grayhill substitutes rated for the same electrical load?

A: Yes. All three parts are rated 0.05A @ 12VDC with identical SPST-NO circuit configuration and momentary switch function. Electrical performance is equivalent across all substitutes.

Q: Do the substitutes meet the same environmental specifications?

A: Yes. Operating temperature range (-25°C ~ 70°C), MSL rating (1 - Unlimited), and RoHS3 compliance are identical across ADTSM65RV and both Grayhill substitutes.

Q: What is the difference between 95C06B4GWT and 95C06D4GWRT?

A: Both are Grayhill SPST-NO tactile switches with identical electrical specifications. The primary difference is actuator height: 95C06B4GWT is 5.00mm, while 95C06D4GWRT is 9.50mm (matching ADTSM65RV). Secondary difference is packaging: Tube versus Tape & Reel.