ADSP-H5G1 Equivalent & Substitute Parts

Part Overview

The ADSP-H5G1 is a single-character green 7-segment LED display module manufactured by Broadcom Limited. This component is classified as obsolete, making identification of suitable substitute parts essential for ongoing system support and component procurement. The ADSP-H5G1 operates as a common anode display with standardized electrical and mechanical specifications that enable direct substitution with compatible alternatives.

Substiute Parts

ADSP-H5G1

Broadcom LimitedIn Stock: 804ADSP-H5G1 Datasheet

Current PartRFQ

HDSP-H5G1

Broadcom LimitedIn Stock: 937HDSP-H5G1 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ADSP-H5G1 is determined by strict equivalence across the following critical parameters:

• Display Configuration: Single-character 7-segment format with common anode topology
• Color and Optical Properties: Green emission at 570nm peak wavelength with 15mcd brightness rating
• Electrical Specifications: 2V forward voltage and 20mA test current
• Physical Form Factor: 0.52" digit size with overall dimensions of 0.693" H x 0.488" W x 0.272" D
• Package Interface: 10-DIP (0.600", 15.24mm) pin configuration
• Environmental Classification: MSL 1 (Unlimited moisture sensitivity level)

Substitute parts must match all parameters listed above to ensure functional and mechanical compatibility within existing circuit designs and PCB layouts.

Parameter Comparison

Engineering Selection Recommendations

The HDSP-H5G1 is the direct substitute for the obsolete ADSP-H5G1. Both components are manufactured by Broadcom Limited and share identical electrical, optical, and mechanical specifications. The HDSP-H5G1 maintains active product status and carries ROHS3 compliance certification and REACH unaffected status, providing regulatory alignment for new designs and ongoing procurement.

Selection of the HDSP-H5G1 is appropriate for applications requiring direct replacement of the ADSP-H5G1 without circuit modification or PCB redesign.

Frequently Asked Questions (FAQ)

Q: Can the HDSP-H5G1 be used as a direct replacement for the ADSP-H5G1?

A: Yes. Both components share identical electrical specifications (2V forward voltage, 20mA test current), optical properties (570nm peak wavelength, 15mcd brightness), physical dimensions (0.693" H x 0.488" W x 0.272" D), and 10-DIP package configuration. No circuit or layout modifications are required.

Q: What is the primary difference between these two parts?

A: The ADSP-H5G1 is obsolete, while the HDSP-H5G1 is active. The HDSP-H5G1 carries ROHS3 compliance and REACH unaffected certifications, making it suitable for current procurement and regulatory requirements.

Q: Are there any package or pinout differences?

A: No. Both components use the 10-DIP (0.600", 15.24mm) package with identical pin configuration and mechanical form factor.

Q: What are the key parameters that determine substitution compatibility?

A: Substitution compatibility is determined by matching: display type (7-segment), character count (1), common pin configuration (common anode), color (green), digit size (0.52"), physical dimensions, package type (10-DIP), forward voltage (2V), test current (20mA), brightness rating (15mcd), and peak wavelength (570nm).