AD706AR Equivalent & Substitute Parts

Part Overview

The AD706AR is a general purpose operational amplifier manufactured by Analog Devices Inc., configured as a dual-channel (2 circuit) device in an 8-SOIC surface mount package. This part is classified as obsolete, making equivalent and substitute parts necessary for ongoing design support and production continuity. The AD706AR operates across a wide supply voltage range of 4V to 36V with an operating temperature range of -40°C to 85°C, suitable for general signal conditioning and amplification applications.

Key Parameters

Parameter	Value	Unit
Amplifier Type	General Purpose	—
Number of Circuits	2	—
Slew Rate	0.15	V/µs
Gain Bandwidth Product	800	kHz
Current - Input Bias	50	pA
Voltage - Input Offset	30	µV
Current - Supply	750	µA
Current - Output / Channel	15	mA
Voltage - Supply Span (Min)	4	V
Voltage - Supply Span (Max)	36	V
Operating Temperature	-40 to 85	°C
Package / Case	8-SOIC (0.154", 3.90mm Width)	—
Mounting Type	Surface Mount	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution of the AD706AR is determined by matching critical electrical and mechanical parameters within defined tolerance bands. The primary substitution criteria are:

Direct Equivalents match all key parameters including amplifier type (general purpose), circuit count (2), supply voltage range (4V to 36V minimum, 36V maximum), operating temperature range (-40°C to 85°C), and 8-SOIC package configuration. These parts are pin-compatible and functionally identical.

Similar Substitutes share the same package and mounting type but may differ in one or more of the following parameters: slew rate, gain bandwidth product, input bias current, input offset voltage, supply current, output current capability, or operating temperature range. These parts require circuit-level evaluation to confirm suitability for the specific application.

Amplifier Type Variants include J-FET and audio amplifier types, which differ fundamentally in input stage architecture and performance characteristics. These are suitable only when the application specifically requires the performance benefits of the alternative amplifier type.

Circuit Count Variants include parts with different numbers of amplifier circuits (4-circuit configurations). These require different package types and are suitable only when the application can accommodate the alternative package footprint.

Parameter Comparison

Part Number	Manufacturer	Amplifier Type	Circuits	Slew Rate (V/µs)	GBW (kHz)	Input Bias (pA)	Input Offset (µV)	Supply Current (µA)	Output Current (mA)	Supply Min (V)	Supply Max (V)	Temp Range (°C)	Package	Status
AD706AR	Analog Devices	General Purpose	2	0.15	800	50	30	750	15	4	36	-40 to 85	8-SOIC	Obsolete
AD706ARZ	Analog Devices	General Purpose	2	0.15	800	50	30	750	15	4	36	-40 to 85	8-SOIC	Active
AD8622ARZ-REEL	Analog Devices	General Purpose	2	0.48	560	45	10	215	40	5	30	-40 to 125	8-SOIC	Active
LT1112IS8	Analog Devices	General Purpose	2	0.30	750	80	25	350	—	2	40	-40 to 85	8-SOIC	Active
LT1112IS8#PBF	Analog Devices	General Purpose	2	0.30	750	80	25	350	—	2	40	-40 to 85	8-SOIC	Active
LT1112S8	Analog Devices	General Purpose	2	0.27	750	90	45	370	—	2	40	-40 to 85	8-SOIC	Active
LF253DT	STMicroelectronics	J-FET	2	16	4000	20	3000	1400	40	6	36	-40 to 105	8-SOIC	Active
LF353DT	STMicroelectronics	J-FET	2	16	4000	20	3000	1400	40	6	36	0 to 70	8-SOIC	Active
LM324ADR2G	onsemi	General Purpose	4	—	1000	40000	2000	1500	40	3	32	0 to 70	14-SOIC	Active
LM833DT	STMicroelectronics	Audio	2	7	15000	300000	300	4000	37	5	30	-40 to 105	8-SOIC	Active
MC33178DR2G	onsemi	General Purpose	2	2	5000	100000	150	1700	100	4	36	-40 to 85	8-SOIC	Active

Engineering Selection Recommendations

Direct Replacement (Pin-Compatible, Functionally Identical)

AD706ARZ is the direct active equivalent of the AD706AR. Both parts are manufactured by Analog Devices Inc. and share identical electrical specifications across all measured parameters. AD706ARZ is currently in active production status with ROHS3 compliance and REACH unaffected certification. This part is the primary recommendation for replacing obsolete AD706AR units in production designs.

Primary General Purpose Alternatives (8-SOIC Package, 2 Circuits)

MC33178DR2G (onsemi) maintains the same 8-SOIC package and dual-circuit configuration with identical supply voltage range (4V to 36V) and operating temperature range (-40°C to 85°C). This part exhibits higher slew rate (2V/µs versus 0.15V/µs), higher gain bandwidth product (5 MHz versus 800 kHz), and higher output current capability (100 mA versus 15 mA per channel). MC33178DR2G is suitable for applications requiring improved frequency response and output drive capability within the same package footprint.

LT1112IS8 and LT1112IS8#PBF (Analog Devices LT® series) provide dual-channel general purpose amplification in 8-SOIC packages with extended supply voltage range (2V to 40V). These parts operate within the same temperature range (-40°C to 85°C) and offer comparable gain bandwidth product (750 kHz). LT1112 variants are suitable for applications requiring lower minimum supply voltage operation.

Extended Temperature Range Alternative

AD8622ARZ-REEL (Analog Devices) offers extended operating temperature range (-40°C to 125°C) with rail-to-rail output capability. This part maintains the 8-SOIC package and dual-circuit configuration but operates at reduced maximum supply voltage (30V versus 36V). AD8622ARZ-REEL is suitable for high-temperature applications where the reduced supply voltage maximum is acceptable.

High-Performance J-FET Alternatives (8-SOIC Package, 2 Circuits)

LF253DT and LF353DT (STMicroelectronics) are J-FET input amplifiers in 8-SOIC packages with significantly higher slew rate (16V/µs), higher gain bandwidth product (4 MHz), and lower input bias current (20 pA). LF253DT operates across -40°C to 105°C temperature range. LF353DT operates across 0°C to 70°C temperature range. These parts are suitable for applications requiring high-speed signal processing and low input bias current characteristics.

Not Recommended for Direct Substitution

LM324ADR2G contains four amplifier circuits in a 14-SOIC package, requiring different PCB layout and is suitable only for applications that can accommodate the alternative package footprint and circuit count.

LM833DT is an audio amplifier with fundamentally different input stage architecture and performance characteristics, suitable only for audio-specific applications.

Frequently Asked Questions (FAQ)

Q: Can AD706ARZ be used as a direct replacement for AD706AR?

A: Yes. AD706ARZ is the active production equivalent of AD706AR. Both parts share identical electrical specifications, pin configuration, and 8-SOIC package. AD706ARZ is the recommended replacement for obsolete AD706AR units.

Q: What is the primary difference between AD706AR and MC33178DR2G?

A: Both parts maintain the same 8-SOIC package, dual-circuit configuration, and supply voltage range (4V to 36V). MC33178DR2G provides higher slew rate (2V/µs versus 0.15V/µs), higher gain bandwidth product (5 MHz versus 800 kHz), and higher output current per channel (100 mA versus 15 mA). MC33178DR2G is suitable for applications requiring improved frequency response and output drive capability.

Q: Can LT1112IS8 replace AD706AR in all applications?

A: LT1112IS8 maintains the same 8-SOIC package, dual-circuit configuration, and operating temperature range (-40°C to 85°C). LT1112IS8 offers extended minimum supply voltage operation (2V versus 4V) and comparable gain bandwidth product (750 kHz). Circuit-level evaluation is required to confirm suitability for specific applications, particularly those dependent on the AD706AR's exact slew rate or output current specifications.

Q: What are the key differences between general purpose and J-FET amplifier types?

A: General purpose amplifiers (AD706AR, MC33178DR2G, LT1112IS8) use bipolar input stages with moderate input bias current and offset voltage. J-FET amplifiers (LF253DT, LF353DT) use field-effect transistor input stages with significantly lower input bias current (20 pA versus 50-100 nA) and higher slew rate (16V/µs versus 0.15-2V/µs). J-FET types are suitable for high-impedance signal sources and high-speed applications.

Q: Why is LM324ADR2G not recommended as a substitute?

A: LM324ADR2G contains four amplifier circuits in a 14-SOIC package, compared to two circuits in the 8-SOIC package of AD706AR. The different package footprint and circuit count require complete PCB redesign. LM324ADR2G is suitable only for new designs that can accommodate the alternative package configuration.

Q: What is the significance of ROHS3 compliance and REACH certification?

A: ROHS3 compliance indicates the part meets Restriction of Hazardous Substances Directive requirements for lead-free manufacturing. REACH unaffected status indicates the part is not subject to Registration, Evaluation, Authorization and Restriction of Chemicals regulations. These certifications are relevant for applications subject to environmental and regulatory compliance requirements in specific markets.

Q: Can LF253DT be used in place of AD706AR for low-frequency applications?

A: LF253DT is a J-FET amplifier with significantly different electrical characteristics. While both parts are available in 8-SOIC packages with dual-circuit configuration, LF253DT exhibits much higher slew rate (16V/µs), higher gain bandwidth product (4 MHz), and lower input bias current (20 pA). For low-frequency applications where these enhanced characteristics are not required, LF253DT represents over-specification and unnecessary cost increase. AD706ARZ or MC33178DR2G are more appropriate selections.

Q: What packaging options are available for AD706 equivalent parts?

A: AD706ARZ is available in tube packaging. LT1112IS8#PBF is available in tube packaging. MC33178DR2G, LF253DT, and LF353DT are available in cut tape and digi-reel packaging. Packaging selection depends on production volume and assembly process requirements. All parts maintain the same 8-SOIC component package footprint.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message