ACML-0805-700-T Ferrite Bead Equivalent & Substitute Parts

Part Overview

The ACML-0805-700-T is a ferrite bead manufactured by Abracon LLC, designed for electromagnetic interference (EMI) suppression in surface mount applications. This component provides 70 Ohms of impedance at 100 MHz with a maximum current rating of 1A and is housed in a 0805 (2012 Metric) package. The part is Active status and ROHS3 compliant. Equivalent and substitute parts are identified when design requirements allow for alternative impedance values or DC resistance specifications while maintaining compatibility with the same package footprint, current rating, and operating temperature range.

Substiute Parts

ACML-0805-700-T

Abracon LLCIn Stock: 1118ACML-0805-700-T Datasheet

Current PartRFQ

ACML-0805-600-T

Abracon LLCIn Stock: 5768ACML-0805-600-T Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The ACML-0805-600-T is identified as a parametric equivalent to the ACML-0805-700-T based on the following substitution criteria:

Matching Parameters (Substitution Basis):

• Package / Case: 0805 (2012 Metric)
• Mounting Type: Surface Mount
• Current Rating (Max): 1A
• Operating Temperature: -55°C ~ 125°C
• Series: ACML
• Product Status: Active
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

Differing Parameters (Design Consideration):

• Impedance @ Frequency: 60 Ohms @ 100 MHz (vs. 70 Ohms @ 100 MHz)
• DC Resistance (DCR) (Max): 50mOhm (vs. 80mOhm)

Substitution is valid when circuit design specifications permit operation with reduced impedance and lower DC resistance values.

Parameter Comparison

Engineering Selection Recommendations

Both the ACML-0805-700-T and ACML-0805-600-T are Active status components manufactured by Abracon LLC within the same ACML series. Both parts are ROHS3 compliant, REACH unaffected, and classified under ECCN EAR99. Selection between these parts depends on circuit impedance requirements at 100 MHz. The ACML-0805-700-T provides higher impedance (70 Ohms) with higher DC resistance (80mOhm), while the ACML-0805-600-T provides lower impedance (60 Ohms) with lower DC resistance (50mOhm). Both maintain identical current ratings, operating temperature ranges, package dimensions, and moisture sensitivity classifications, ensuring mechanical and thermal compatibility in surface mount applications.

Frequently Asked Questions (FAQ)

Q: Can the ACML-0805-600-T replace the ACML-0805-700-T in my design?

A: Substitution is possible if your circuit design specifications allow for 60 Ohms impedance at 100 MHz instead of 70 Ohms, and if lower DC resistance (50mOhm vs. 80mOhm) is acceptable. Both parts share identical package dimensions, current ratings, and operating temperature ranges.

Q: Are the physical dimensions identical between these parts?

A: Yes. Both the ACML-0805-700-T and ACML-0805-600-T are housed in 0805 (2012 Metric) packages with identical dimensions of 0.079" L x 0.049" W (2.00mm x 1.25mm) and maximum height of 0.041" (1.05mm). They are mechanically interchangeable on PCB layouts.

Q: What is the difference in DC resistance between these parts?

A: The ACML-0805-700-T has a maximum DC resistance of 80mOhm, while the ACML-0805-600-T has a maximum DC resistance of 50mOhm. The lower DC resistance of the substitute part results in reduced power dissipation in applications with continuous current flow.

Q: Do both parts have the same current rating?

A: Yes. Both the ACML-0805-700-T and ACML-0805-600-T are rated for a maximum current of 1A and operate across the same temperature range of -55°C to 125°C.

Q: Are there any compliance or regulatory differences between these parts?

A: No. Both parts are ROHS3 compliant, REACH unaffected, and classified as EAR99 under export control regulations. Moisture sensitivity level is identical at MSL 1 (Unlimited) for both parts.