95J75R Equivalent & Substitute Parts Reference

Part Overview

The Ohmite 95J75R is a 75 Ohms ±5% 5W through-hole wirewound resistor with axial leads, flame retardant coating, and safety features. This component is classified as Active product status with 976 pieces currently in stock. The 95J75R is packaged in a box configuration and is RoHS non-compliant. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity for applications requiring identical electrical and mechanical specifications.

Substiute Parts

95J75R

OhmiteIn Stock: 101495J75R Datasheet

Current PartRFQ

95J75RE

OhmiteIn Stock: 114295J75RE Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 95J75R are identified based on strict electrical and mechanical parameter matching. The primary substitution criterion is parametric equivalence: all substitute parts must maintain identical resistance value (75 Ohms), tolerance (±5%), power rating (5W), composition (wirewound), package type (axial), temperature coefficient (±30ppm/°C), physical dimensions (0.264" Dia x 0.969" L), and termination count (2). The 95J75RE qualifies as a parametric equivalent under these criteria. Packaging configuration (box versus bulk) does not affect electrical or mechanical compatibility and is therefore not a substitution barrier.

Parameter Comparison

Engineering Selection Recommendations

Both the 95J75R and 95J75RE are Active status components from the Ohmite 90 series and are electrically and mechanically identical. The 95J75R is RoHS non-compliant with MSL rating of 1 (Unlimited). The 95J75RE is ROHS3 compliant and carries REACH Unaffected status. Selection between these parts should be based on regulatory compliance requirements of the end application. For applications requiring RoHS3 compliance or REACH documentation, the 95J75RE is the appropriate selection. For applications without RoHS compliance mandates, either part is functionally equivalent. Packaging format (box for 95J75R, bulk for 95J75RE) reflects inventory and procurement preferences and does not affect component performance or compatibility.

Frequently Asked Questions (FAQ)

Q: Can the 95J75RE be used as a direct replacement for the 95J75R? A: Yes. The 95J75RE is a parametric equivalent with identical electrical specifications (75 Ohms ±5%, 5W), composition (wirewound), temperature coefficient (±30ppm/°C), and physical dimensions (0.264" Dia x 0.969" L). Both components feature flame retardant coating and safety characteristics. Direct substitution is supported from an electrical and mechanical standpoint.

Q: What is the difference between the 95J75R and 95J75RE? A: The primary differences are packaging configuration and regulatory compliance status. The 95J75R is supplied in box packaging and is RoHS non-compliant. The 95J75RE is supplied in bulk packaging and is ROHS3 compliant with REACH Unaffected status. All electrical and mechanical parameters are identical.

Q: Does packaging format affect compatibility? A: No. Packaging format (box versus bulk) is a procurement and inventory consideration only. It does not affect electrical performance, mechanical fit, or circuit compatibility. Both packaging formats contain the same component.

Q: Which part should I select for RoHS-compliant applications? A: The 95J75RE is ROHS3 compliant and is the appropriate selection for applications requiring RoHS compliance documentation and certification.

Q: Are both parts currently available? A: Yes. The 95J75R has 976 pieces in stock. The 95J75RE has 1126 pieces in stock. Both are listed as Active product status.