Ohmite 95J360 360 Ohm 5W Axial Wirewound Resistor - Equivalent & Substitute Parts

Part Overview

The Ohmite 95J360 is a 360 Ohm, 5% tolerance, 5W through-hole axial wirewound resistor with flame retardant coating and safety features. This component is designed for applications requiring reliable power dissipation in compact form factors. The part maintains active product status with 911 units currently in stock. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and design continuity when the primary part becomes unavailable or when alternative packaging or compliance requirements are needed.

Substiute Parts

95J360

OhmiteIn Stock: 99395J360 Datasheet

Current PartRFQ

95J360E

OhmiteIn Stock: 91095J360E Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Ohmite 95J360 is determined by strict equivalence across the following critical parameters:

• Resistance Value: 360 Ohms (exact match required)
• Tolerance: ±5% (exact match required)
• Power Rating: 5W (exact match required)
• Composition: Wirewound (exact match required)
• Package Type: Axial (exact match required)
• Physical Dimensions: 0.264" Dia x 0.969" L / 6.70mm x 24.60mm (exact match required)
• Temperature Coefficient: ±30ppm/°C (exact match required)
• Features: Flame Retardant Coating, Safety (exact match required)

The substitute part 95J360E meets all electrical and mechanical parameters identical to the main part. Differences in packaging format (Bulk vs. standard) and RoHS compliance status do not affect electrical or mechanical interchangeability.

Parameter Comparison

Engineering Selection Recommendations

Both the 95J360 and 95J360E are active products from Ohmite's Series 90 wirewound resistor line. Selection between these parts should be based on the following criteria:

95J360: Select this part number when standard packaging is required and RoHS non-compliant components are acceptable for the application.

95J360E: Select this part number when ROHS3 compliance is mandated by design specifications, procurement policies, or regulatory requirements. The bulk packaging format may offer cost advantages for high-volume procurement. Both parts are electrically and mechanically identical, ensuring direct substitution without circuit redesign.

Frequently Asked Questions (FAQ)

Q: Are the 95J360 and 95J360E electrically interchangeable?

A: Yes. Both parts have identical resistance (360 Ohms), tolerance (±5%), power rating (5W), temperature coefficient (±30ppm/°C), and composition (wirewound). They will perform identically in any circuit application.

Q: What is the difference between these two part numbers?

A: The primary differences are packaging format (standard vs. bulk) and RoHS compliance status. The 95J360 is RoHS non-compliant, while the 95J360E is ROHS3 compliant. All electrical and mechanical specifications are identical.

Q: Can I use 95J360E as a direct replacement for 95J360 on a PCB?

A: Yes. Both parts share identical axial package dimensions (0.264" Dia x 0.969" L / 6.70mm x 24.60mm), lead configuration (2 terminations), and physical form factor. No PCB layout modifications are required.

Q: Which part should I specify for new designs?

A: If RoHS3 compliance is required by your design standards or customer specifications, specify 95J360E. If RoHS compliance is not a requirement, either part is acceptable. Verify your procurement and regulatory requirements before finalizing part selection.

Q: Are there inventory considerations when choosing between these parts?

A: Current inventory shows 911 units of 95J360 and 893 units of 95J360E in stock. For time-sensitive projects, verify real-time availability with your supplier before committing to a specific part number.