Equivalent & Substitute Parts for 95C06A3RAT

Part Overview

The 95C06A3RAT is an active SPST-NO tactile switch manufactured by Grayhill Inc., designed for low-current applications at 12VDC with 0.05A contact rating. This right-angle, side-actuated through-hole switch provides tactile feedback with 160gf operating force and is suitable for applications requiring compact form factors and reliable mechanical actuation. Finding equivalent or substitute parts becomes necessary when addressing inventory constraints, lead time requirements, or specific application compatibility needs while maintaining functional equivalence within defined electrical and mechanical parameters.

Substiute Parts

95C06A3RAT

Grayhill Inc.In Stock: 95795C06A3RAT Datasheet

Current PartRFQ

HP0215AFKP2

NKK SwitchesIn Stock: 1719HP0215AFKP2 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 95C06A3RAT with alternative parts is determined by the following critical parameters:

Circuit Configuration: Both the main part and substitute must maintain SPST-NO (Single Pole Single Throw, Normally Open) circuit topology to preserve switching logic.

Switch Function: Off-Mom (Off-Momentary) operation must be preserved to ensure identical user interaction behavior.

Operating Force: The 160gf operating force specification must be maintained across substitute parts to ensure consistent tactile feedback and actuation reliability.

Termination Style: PC Pin termination is required for direct PCB compatibility without adapter components.

Compliance Standards: RoHS3 compliance and REACH unaffected status must be maintained for regulatory alignment.

Mechanical Life: Substitute parts must meet or exceed the 1,000,000 cycle mechanical life specification for equivalent durability.

The substitute part HP0215AFKP2 (NKK Switches) shares the core SPST-NO circuit configuration, Off-Mom function, 160gf operating force, PC Pin termination, RoHS3 compliance, and REACH unaffected status. However, electrical and mechanical parameter differences exist that require engineering evaluation for specific application contexts.

Parameter Comparison

Engineering Selection Recommendations

Both the 95C06A3RAT and HP0215AFKP2 maintain active product status with full RoHS3 compliance and REACH unaffected regulatory standing, ensuring long-term availability and environmental compliance alignment.

The 95C06A3RAT is specified for 0.05A @ 12VDC applications, while the HP0215AFKP2 is rated for 3VA @ 28VDC. These contact ratings reflect different electrical load capacities and voltage domains. Selection between these parts must be based on the actual circuit voltage and current requirements of the target application.

The 95C06A3RAT provides right-angle, side-actuated actuation with 1,000,000 cycle mechanical life. The HP0215AFKP2 provides top-actuated actuation with 500,000 cycle mechanical life. Actuator orientation and mounting geometry differences require verification against PCB layout constraints and mechanical accessibility requirements.

The 95C06A3RAT operates across -25°C to 70°C, while the HP0215AFKP2 operates across -20°C to 70°C. Applications requiring operation below -20°C require the 95C06A3RAT.

Both parts share identical 160gf operating force, PC Pin termination, and MSL 1 moisture sensitivity rating, supporting direct functional equivalence in these dimensions.

Frequently Asked Questions (FAQ)

Q: Can the HP0215AFKP2 directly replace the 95C06A3RAT in all applications?

A: Direct replacement is not universal. The HP0215AFKP2 differs in contact rating (3VA @ 28VDC vs. 0.05A @ 12VDC), actuator orientation (top vs. side), mechanical life (500,000 vs. 1,000,000 cycles), and operating temperature minimum (-20°C vs. -25°C). Replacement is valid only when the target application operates within the HP0215AFKP2 electrical specifications, accommodates top actuation geometry, and does not require operation below -20°C or exceed 500,000 cycles.

Q: What are the key differences in actuator orientation between these parts?

A: The 95C06A3RAT features side actuation with right-angle mounting, positioning the actuator perpendicular to the PCB plane along the component's side. The HP0215AFKP2 features top actuation, positioning the actuator vertically above the PCB. These differences affect PCB layout compatibility, mechanical accessibility, and user interaction geometry.

Q: Are both parts suitable for high-cycle applications?

A: The 95C06A3RAT is rated for 1,000,000 mechanical cycles, suitable for high-cycle applications. The HP0215AFKP2 is rated for 500,000 cycles, limiting its use to applications with lower cycle counts. Applications exceeding 500,000 cycles require the 95C06A3RAT.

Q: Do both parts meet current environmental compliance requirements?

A: Yes. Both the 95C06A3RAT and HP0215AFKP2 are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory standards for electronic component manufacturing and use.

Q: What packaging considerations apply to these parts?

A: The 95C06A3RAT is supplied in Bag packaging with 925 pieces in stock. The HP0215AFKP2 is supplied in Box packaging with 1,640 pieces in stock. Packaging format may affect handling, storage, and integration into manufacturing workflows.

Q: Can these parts be used interchangeably in low-voltage, low-current circuits?

A: The 95C06A3RAT is specifically rated for 0.05A @ 12VDC. The HP0215AFKP2 is rated for 3VA @ 28VDC, representing significantly higher electrical capacity. In low-voltage, low-current circuits operating at 12VDC with currents below 0.05A, the 95C06A3RAT is the specified part. The HP0215AFKP2 may be used only if the circuit operates within its 28VDC and 3VA specifications.