Equivalent & Substitute Parts for Ohmite 90J22K

Part Overview

The Ohmite 90J22K is a 22 kOhms ±5% 11W through-hole axial wirewound resistor with flame retardant coating and safety features. This component is classified as Active product status and is currently in stock with 1123 units available. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the same product category, enabling component procurement flexibility while preserving circuit performance and reliability requirements.

Substiute Parts

90J22K

OhmiteIn Stock: 119590J22K Datasheet

Current PartRFQ

90J22KE

OhmiteIn Stock: 97490J22KE Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 90J22K is determined by strict equivalence across the following parameters:

• Resistance value: 22 kOhms
• Tolerance: ±5%
• Power rating: 11W
• Composition: Wirewound
• Package configuration: Axial
• Temperature coefficient: ±30ppm/°C
• Physical dimensions: 0.343" Dia x 1.811" L (8.70mm x 46.00mm)
• Number of terminations: 2

The identified substitute part maintains all electrical and mechanical specifications required for direct functional replacement. Packaging format differences (Bulk versus standard packaging) do not affect electrical performance or mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both the 90J22K and 90J22KE are Active status components manufactured by Ohmite within the 90 series wirewound resistor line. The primary distinction between these parts is regulatory compliance status: the 90J22K is RoHS non-compliant, while the 90J22KE achieves ROHS3 compliance. Selection between these equivalent parts should be based on applicable regulatory requirements for the end application. Both components maintain identical electrical performance, mechanical dimensions, and thermal characteristics. Inventory availability differs between the two part numbers, with the 90J22K currently stocked at 1123 units and the 90J22KE at 917 units.

Frequently Asked Questions (FAQ)

Q: Can the 90J22KE replace the 90J22K in existing designs?

A: Yes. The 90J22KE is electrically and mechanically equivalent to the 90J22K. All critical parameters including resistance value, tolerance, power rating, temperature coefficient, and physical dimensions are identical. The substitute part is suitable for direct replacement in circuit applications.

Q: What is the difference between the 90J22K and 90J22KE?

A: The primary difference is RoHS compliance status. The 90J22K is RoHS non-compliant, while the 90J22KE is ROHS3 compliant. Packaging format also differs: the 90J22K uses standard packaging while the 90J22KE is supplied in Bulk packaging. Electrical and mechanical specifications are identical.

Q: Are there packaging compatibility considerations when substituting these parts?

A: Both parts are supplied in Axial package configuration with identical physical dimensions (0.343" Dia x 1.811" L). The difference in packaging format (standard versus Bulk) refers to order quantity and shipping configuration, not component form factor. No PCB layout or mechanical mounting modifications are required.

Q: Which part should be selected for new designs?

A: Selection should be based on regulatory compliance requirements. For applications requiring RoHS3 compliance, the 90J22KE is the appropriate choice. For applications without RoHS compliance mandates, either part meets the electrical and mechanical requirements.

Q: Are both parts currently available?

A: Yes. The 90J22K has 1123 units in stock, and the 90J22KE has 917 units in stock. Both are classified as Active product status.