TE Connectivity 8134-HC-8P2 Pin Receptacle Connector Equivalent & Substitute Parts

Part Overview

The TE Connectivity 8134-HC-8P2 is a pin receptacle connector from the HOLTITE series, designed for press-fit termination applications. This component accepts pin diameters ranging from 0.025" to 0.035" (0.64mm to 0.89mm) and features a no-tail configuration with beryllium copper contacts finished in gold. The part is currently Active in product status with 48,650 pieces available in inventory.

Substitute parts are identified when design requirements change, inventory constraints occur, or when alternative pin diameter specifications are needed for specific applications. The 8134-HC-6P2 represents an alternative within the same HOLTITE series, though it accommodates a smaller pin diameter range and carries an Obsolete product status.

Substiute Parts

8134-HC-8P2

TE Connectivity AMP ConnectorsIn Stock: 486848134-HC-8P2 Datasheet

Current PartRFQ

8134-HC-6P2

TE Connectivity AMP ConnectorsIn Stock: 172358134-HC-6P2 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 8134-HC-8P2 is determined by the following critical parameters:

Pin Diameter Acceptance Range: The primary differentiator between the main part and substitute parts is the pin diameter specification. The 8134-HC-8P2 accepts pins from 0.025" to 0.035", while alternatives may accommodate different ranges.

Termination Method: All parts in this comparison use press-fit termination, ensuring mechanical compatibility with identical board assembly processes.

Series Consistency: Both the main part and substitute remain within the HOLTITE series, maintaining design compatibility and interchangeability within the same connector family.

Contact Material and Finish: Beryllium copper with gold finish is consistent across all parts, ensuring electrical performance and environmental resistance remain unchanged.

Operating Temperature and Compliance: All parts operate across the -55°C to 125°C range and maintain RoHS compliance and MSL 1 rating, confirming suitability for equivalent applications.

The 8134-HC-6P2 qualifies as a substitute only when pin diameter requirements are 0.020" to 0.030" (0.51mm to 0.76mm), representing a narrower acceptance range suitable for smaller gauge pins.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection: The 8134-HC-8P2 is the recommended choice for new designs and active production applications. This part maintains Active product status, ensuring long-term availability and supply chain stability. With 48,650 pieces in current inventory, procurement lead times are minimized.

Substitute Selection Criteria: The 8134-HC-6P2 is applicable only when design specifications explicitly require accommodation of pin diameters within the 0.020" to 0.030" range. This part carries Obsolete status, indicating discontinued manufacturing and limited inventory availability (17,197 pieces). Selection of this substitute should be restricted to legacy system maintenance or when pin diameter requirements are incompatible with the main part.

Compliance Considerations: Both parts maintain identical RoHS compliance, REACH status, and MSL 1 ratings. No additional environmental or regulatory screening is required when transitioning between these parts, provided pin diameter specifications align with application requirements.

Inventory and Supply Chain: The 8134-HC-8P2 offers superior supply chain reliability due to Active status. The 8134-HC-6P2 should be considered a temporary alternative only when the main part is unavailable and pin diameter compatibility is confirmed.

Frequently Asked Questions (FAQ)

Q: Can the 8134-HC-6P2 be used as a direct replacement for the 8134-HC-8P2?

A: No. The 8134-HC-6P2 accepts pin diameters of 0.020" to 0.030", while the 8134-HC-8P2 accepts 0.025" to 0.035". Direct substitution is only possible if the application uses pins within the overlapping range of 0.025" to 0.030". Pin diameter specifications must be verified before substitution.

Q: What is the significance of the Obsolete status for the 8134-HC-6P2?

A: Obsolete status indicates that TE Connectivity has discontinued manufacturing of this part. While 17,197 pieces remain in inventory, future availability is not guaranteed. New designs should utilize the Active 8134-HC-8P2 to ensure long-term supply chain continuity.

Q: Are the mechanical dimensions identical between these parts?

A: Overall length (0.136"), mounting hole diameter (0.058"), and board thickness (0.030") are identical. However, the pin hole diameter differs: 0.042" for the 8134-HC-8P2 versus 0.038" for the 8134-HC-6P2. This difference reflects the smaller pin diameter range of the substitute part.

Q: Do both parts meet the same environmental and compliance standards?

A: Yes. Both parts are RoHS Compliant, carry MSL 1 (Unlimited) rating, and operate across -55°C to 125°C. Contact material (beryllium copper), finish (gold), and finish thickness (24.8µin) are identical, ensuring equivalent electrical performance and environmental resistance.

Q: What is the packaging format for these parts?

A: Both parts are supplied in Bulk packaging, suitable for high-volume assembly operations and automated insertion processes.

Q: How do I determine which part is correct for my application?

A: Verify the pin diameter specification of the connector pins in your design. If pins are 0.025" to 0.035", use the 8134-HC-8P2. If pins are 0.020" to 0.030", the 8134-HC-6P2 is applicable. Pins within the 0.025" to 0.030" overlap range are compatible with both parts.