TE Connectivity AMP Connectors 767115-2 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 767115-2 is a 76-position rectangular connector receptacle designed for surface mount applications. This connector features center strip contacts with gold plating and is part of the MICTOR series. The component is currently in active product status and maintains full RoHS compliance with unlimited moisture sensitivity rating.

Substitute parts become necessary when the primary part number reaches end-of-life status, when packaging requirements differ between manufacturing runs, or when inventory constraints require alternative sourcing from equivalent product lines within the same connector family.

Substiute Parts

767115-2

TE Connectivity AMP ConnectorsIn Stock: 945767115-2 Datasheet

Current PartRFQ

5767096-9

TE Connectivity AMP ConnectorsIn Stock: 11655767096-9 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 767115-2 is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Number of Positions: 76
• Pitch: 0.025" (0.64mm)
• Number of Rows: 2
• Connector Type: Receptacle, Center Strip Contacts
• Mounting Type: Surface Mount
• Contact Finish: Gold
• Contact Finish Thickness: 30.0µin (0.76µm)
• Height Above Board: 0.236" (6.00mm)
• Features: Board Guide, Ground Bus (Plane)
• Series: MICTOR
• Mated Stacking Heights: 6.6mm, 9mm, 10.92mm, 12.57mm, 17.96mm, 18.75mm, 20mm, 22.86mm

Allowable Variation Parameters:

• Packaging format (Tape & Reel versus Cut Tape)
• Product status (Active versus Obsolete)
• RoHS revision level (RoHS Compliant versus ROHS3 Compliant)

The substitute part 5767096-9 maintains complete electrical and mechanical equivalence to the 767115-2 across all critical parameters. The primary differences are packaging configuration and product lifecycle status.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection (767115-2): The 767115-2 is the recommended primary selection for new designs and production runs. This part maintains active product status with current manufacturing support. The Tape & Reel packaging format provides optimized handling for high-volume surface mount assembly operations. RoHS compliance certification is current and applicable to all regulatory jurisdictions.

Substitute Selection (5767096-9): The 5767096-9 serves as a direct functional equivalent when the primary part becomes unavailable. This substitute maintains complete electrical and mechanical compatibility with the 767115-2 across all critical connector parameters. The Cut Tape packaging format is suitable for lower-volume applications or manual assembly processes. The Obsolete product status indicates this part is no longer in active production; however, existing inventory remains available for immediate sourcing.

The ROHS3 compliance certification of the 5767096-9 exceeds the RoHS Compliant status of the 767115-2, ensuring compatibility with current and future regulatory requirements.

Compliance Considerations: Both parts carry identical ECCN (EAR99) and HTSUS (8536.69.4040) classifications, confirming equivalent export control and tariff treatment. Both parts maintain MSL 1 (Unlimited) moisture sensitivity rating, eliminating special handling requirements during storage and assembly.

Frequently Asked Questions (FAQ)

Q: Can the 5767096-9 be used as a direct replacement for the 767115-2 in existing designs?

A: Yes. The 5767096-9 is electrically and mechanically equivalent to the 767115-2. All critical parameters including position count, pitch, contact finish, mounting type, and board height are identical. The substitute part will function identically in the same PCB layout and assembly process.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging supplies components on continuous carrier tape wound on reels, optimized for automated pick-and-place assembly equipment. Cut Tape (CT) packaging supplies components on cut segments of carrier tape, suitable for manual handling or lower-volume assembly operations. Both packaging formats contain the same component with identical electrical and mechanical specifications.

Q: Why is the 5767096-9 listed as Obsolete if it is still available?

A: Obsolete product status indicates that the manufacturer has discontinued active production of this part number. However, existing inventory from previous production runs remains available for purchase through authorized distributors. The part will continue to function identically to the active 767115-2 for the duration of available inventory.

Q: Are there any compliance differences between the two parts?

A: Both parts carry identical ECCN and HTSUS classifications. The 5767096-9 carries ROHS3 compliance certification, which is a more recent revision than the RoHS Compliant status of the 767115-2. ROHS3 compliance is fully backward compatible with RoHS requirements, confirming that the substitute part meets or exceeds all applicable environmental regulations.

Q: Can these parts be mixed in the same production batch?

A: Yes. Both parts are electrically and mechanically equivalent and will perform identically in the same circuit. However, packaging format differences (Tape & Reel versus Cut Tape) may require different handling procedures during assembly. Verify that your assembly equipment can accommodate the packaging format of the substitute part.

Q: What are the mated stacking heights, and why are multiple values listed?

A: Mated stacking heights represent the total connector height when mated with complementary connector types at various engagement depths. The 767115-2 and 5767096-9 support eight different stacking height configurations: 6.6mm, 9mm, 10.92mm, 12.57mm, 17.96mm, 18.75mm, 20mm, and 22.86mm. The specific stacking height used in your application depends on the mating connector type selected.

Q: Is the gold contact finish thickness identical between both parts?

A: Yes. Both the 767115-2 and 5767096-9 specify identical gold contact finish thickness of 30.0µin (0.76µm). This ensures equivalent electrical performance, contact resistance, and durability across both part numbers.