TE Connectivity AMP Connectors 767081-5 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 767081-5 is a 190 Position Connector Receptacle with Center Strip Contacts designed for Surface Mount applications. This MICTOR series rectangular connector features Palladium-Nickel contact finish and is classified as an Active product. The connector accommodates multiple mated stacking heights and includes board guide and ground bus plane features. Substitute parts are identified when original inventory is unavailable, when alternative compliance certifications are required, or when design revisions necessitate component alternatives that maintain identical electrical and mechanical specifications.

Substiute Parts

767081-5

TE Connectivity AMP ConnectorsIn Stock: 769767081-5 Datasheet

Current PartRFQ

5767054-5

TE Connectivity AMP ConnectorsIn Stock: 10435767054-5 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 767081-5 are identified based on strict parametric equivalence across all critical electrical and mechanical specifications. The substitution logic is based on the following key parameters that must remain identical:

• Connector Type and Function: Receptacle with Center Strip Contacts
• Position Count: 190 positions
• Pitch Specification: 0.025" (0.64mm)
• Row Configuration: 2 rows
• Mounting Technology: Surface Mount
• Contact Material and Finish: Palladium-Nickel with 5.00µin thickness
• Physical Dimensions: Height above board of 0.236" (6.00mm) and compatible mated stacking heights
• Functional Features: Board Guide and Ground Bus (Plane)
• Series Classification: MICTOR

Parts meeting all these parameters are classified as parametric equivalents and direct substitutes. Variations in compliance certifications (RoHS status, REACH status) do not affect electrical or mechanical compatibility and are noted separately for procurement and regulatory purposes.

Parameter Comparison

Engineering Selection Recommendations

The 767081-5 and 5767054-5 are parametric equivalents with identical electrical and mechanical specifications. Selection between these parts is determined by compliance and regulatory requirements rather than functional performance.

767081-5 is appropriate for applications where RoHS non-compliance is acceptable and REACH Affected status is compatible with project requirements.

5767054-5 is appropriate for applications requiring ROHS3 compliance. This substitute provides equivalent functionality with enhanced regulatory compliance certification. The Vendor Undefined REACH status should be evaluated against specific project compliance requirements.

Both parts share identical connector architecture, contact specifications, mounting characteristics, and physical dimensions. Substitution between these parts does not require circuit design modifications or PCB layout changes.

Frequently Asked Questions (FAQ)

Q: Are the 767081-5 and 5767054-5 electrically interchangeable?

A: Yes. Both parts are 190 Position Receptacle connectors with identical pitch (0.025"), contact finish (Palladium-Nickel), and electrical specifications. They function identically in circuit applications.

Q: Can I substitute 5767054-5 for 767081-5 on an existing PCB design?

A: Yes. The parts have identical physical dimensions, mounting type (Surface Mount), height above board (0.236"), and mated stacking heights. No PCB layout modifications are required.

Q: What is the difference between these two parts?

A: The primary differences are compliance certifications. The 5767054-5 is ROHS3 Compliant, while the 767081-5 is RoHS non-compliant. Both are REACH Affected or Vendor Undefined respectively. All electrical and mechanical parameters are identical.

Q: Which part should I select for a new design?

A: Selection depends on your project's regulatory requirements. If ROHS3 compliance is mandatory, select 5767054-5. If RoHS compliance is not required, either part is suitable based on availability and REACH compliance needs.

Q: Are the contact finishes identical?

A: Yes. Both parts feature Palladium-Nickel contact finish with 5.00µin (0.127µm) thickness, ensuring identical electrical performance and reliability characteristics.

Q: Do these connectors support the same mated stacking heights?

A: Yes. Both parts support identical mated stacking heights: 6.6mm, 9mm, 10.92mm, 12.57mm, 17.96mm, 18.75mm, 20mm, and 22.86mm.

Q: What is the Moisture Sensitivity Level for these connectors?

A: Both parts have MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.

Q: Are both parts available in Tube packaging?

A: Yes. Both the 767081-5 and 5767054-5 are supplied in Tube packaging.