TE Connectivity AMP Connectors 767057-1 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 767057-1 is a 38 Position Connector Plug with Outer Shroud Contacts designed for Surface Mount applications. This rectangular connector features Palladium-Nickel contact finish and is part of the MICTOR series. The 767057-1 is classified as Obsolete, making identification of functionally equivalent substitute parts essential for ongoing design support, maintenance, and production continuity.

Substiute Parts

767057-1

TE Connectivity AMP ConnectorsIn Stock: 810767057-1 Datasheet

Current PartRFQ

5767057-1

TE Connectivity AMP ConnectorsIn Stock: 10925767057-1 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 767057-1 is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Number of Positions: 38
• Pitch: 0.025" (0.64mm)
• Number of Rows: 2
• Contact Finish: Palladium-Nickel
• Contact Finish Thickness: 5.00µin (0.127µm)

Mechanical Parameters:

• Connector Type: Plug, Outer Shroud Contacts
• Mounting Type: Surface Mount
• Height Above Board: 0.484" (12.29mm)
• Mated Stacking Heights: 12.57mm, 21.6mm
• Features: Board Guide, Ground Bus (Plane)

Environmental Parameters:

• Moisture Sensitivity Level (MSL): 1 (Unlimited)
• Series: MICTOR

The substitute part 5767057-1 maintains complete equivalence across all electrical, mechanical, and environmental parameters. The primary distinction is product status and regulatory compliance.

Parameter Comparison

Engineering Selection Recommendations

For New Designs and Production: The 5767057-1 is the appropriate selection for all new applications. This part maintains complete functional and mechanical equivalence to the 767057-1 while offering Active product status and ROHS3 compliance. The 5767057-1 eliminates obsolescence risk and satisfies current regulatory requirements for RoHS3 compliance.

For Legacy System Support: The 767057-1 remains functionally equivalent to the 5767057-1 for applications where RoHS non-compliance is acceptable and product availability from existing inventory is prioritized. The 767057-1 is currently available with 711 pieces in stock.

Regulatory Considerations: The 5767057-1 carries ROHS3 Compliant status, whereas the 767057-1 is RoHS non-compliant. Both parts maintain REACH Affected status and EAR99 ECCN classification. Selection between these parts should account for end-use regulatory requirements and supply chain compliance mandates.

Packaging Consideration: The 5767057-1 is supplied in Tube packaging. Packaging specifications for the 767057-1 were not provided in the technical data.

Frequently Asked Questions (FAQ)

Q: Can the 5767057-1 directly replace the 767057-1 in existing designs?

A: Yes. The 5767057-1 is electrically and mechanically equivalent to the 767057-1. All critical parameters including connector type, position count, pitch, mounting type, contact finish, and dimensional specifications are identical. Direct substitution is supported without design modification.

Q: What is the primary reason to transition from 767057-1 to 5767057-1?

A: The 767057-1 is classified as Obsolete, while the 5767057-1 is Active. The 5767057-1 also provides ROHS3 compliance, addressing current regulatory requirements. For new production and long-term supply assurance, the 5767057-1 is the recommended selection.

Q: Are there any dimensional differences between these parts?

A: No. Both parts share identical dimensional specifications: 0.484" (12.29mm) height above board, 0.025" (0.64mm) pitch, and mated stacking heights of 12.57mm and 21.6mm.

Q: What is the difference in packaging between the two parts?

A: The 5767057-1 is supplied in Tube packaging. Packaging information for the 767057-1 was not specified in the technical documentation.

Q: Are both parts compatible with the same mating connectors?

A: Yes. Both the 767057-1 and 5767057-1 are 38 Position Plugs with Outer Shroud Contacts in the MICTOR series with identical pitch and row configuration. They are compatible with the same mating receptacles.

Q: What is the Moisture Sensitivity Level for these connectors?

A: Both parts carry MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.

Q: Does the contact finish specification differ between the parts?

A: No. Both parts feature Palladium-Nickel contact finish with identical thickness of 5.00µin (0.127µm).