Amphenol ICC 75869-701LF Rectangular Connector - Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 75869-701LF is a vertical rectangular header connector with 10 positions arranged in 2 rows, featuring 0.100" (2.54mm) pitch mating and row spacing. This through-hole component is designed for board-to-cable/wire applications with shrouded 4-wall construction and push-pull fastening. The part is classified as obsolete, making identification of active equivalent components essential for ongoing design support and procurement.

Substiute Parts

75869-701LF

Amphenol ICC (FCI)In Stock: 123475869-701LF Datasheet

Current PartRFQ

75869-101LF

Amphenol ICC (FCI)In Stock: 116175869-101LF Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The 75869-101LF serves as the active equivalent to the obsolete 75869-701LF. Substitution is valid based on the following critical parameters that remain identical between both parts:

• Connector type: Header
• Contact type: Male Pin
• Number of positions: 10
• Number of rows: 2
• Pitch - mating: 0.100" (2.54mm)
• Row spacing - mating: 0.100" (2.54mm)
• Mounting type: Through Hole
• Shrouding: Shrouded - 4 Wall
• Fastening type: Push-Pull
• Termination: Solder
• Contact material: Phosphor Bronze
• Insulation material: Thermoplastic, Glass Filled
• Insulation color: Blue
• Material flammability rating: UL94 V-0
• Base product number: 75869

The primary distinction is the product status transition from obsolete to active, accompanied by enhanced contact finish specifications on the 75869-101LF.

Parameter Comparison

Engineering Selection Recommendations

The 75869-101LF is the direct active replacement for the obsolete 75869-701LF. Both components share identical mechanical and electrical interface specifications, ensuring pin-for-pin compatibility in existing PCB designs without layout modifications.

The 75869-101LF provides additional compliance certifications including RoHS compliance and REACH status documentation, supporting modern regulatory requirements. The specified contact finishes (Gold GXT™ on mating contacts and Tin on posts) on the 75869-101LF provide defined surface treatment specifications compared to the unspecified finishes on the obsolete variant.

For new designs or production transitions from the obsolete 75869-701LF, the 75869-101LF is the appropriate selection based on active product status and regulatory compliance.

Frequently Asked Questions (FAQ)

Q: Can the 75869-101LF be used as a direct replacement for the 75869-701LF in existing designs?

A: Yes. Both parts share identical connector type, contact configuration, pitch, row spacing, mounting method, shrouding, and fastening specifications. No PCB layout or design modifications are required.

Q: What is the difference in packaging between these parts?

A: The 75869-701LF packaging is not specified. The 75869-101LF is supplied in Tube packaging.

Q: Are there compliance differences between the two parts?

A: The 75869-101LF includes RoHS Compliant and REACH Affected status documentation. The 75869-701LF does not specify these compliance attributes. Both parts carry UL94 V-0 material flammability rating and MSL 1 (Unlimited) moisture sensitivity level.

Q: What contact finish specifications apply to each part?

A: The 75869-701LF does not specify contact finish details. The 75869-101LF specifies Gold GXT™ finish (30.0µin / 0.76µm) on mating contacts and Tin finish (78.7µin / 2.00µm) on posts.

Q: Are both parts from the same manufacturer and series?

A: Yes. Both are manufactured by Amphenol ICC (FCI) and belong to the Quickie™ series.

Q: What is the mechanical compatibility between these connectors?

A: Both connectors feature identical mechanical specifications: 10 positions in 2 rows, 0.100" (2.54mm) pitch and row spacing, through-hole mounting, shrouded 4-wall construction, square contact shape, and push-pull fastening. Mating contact length is 0.236" (6.00mm) and post length is 0.120" (3.05mm) on both parts.