Amphenol ICC 75160-103-36 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 75160-103-36 is a rectangular connector header for through-hole mounting with 36 positions at 0.100" (2.54mm) pitch. This component is classified as obsolete, making equivalent substitute parts necessary for new designs and ongoing production support. The BERGSTIK® series connector features unshrouded male pins with solder termination and push-pull fastening, designed for board-to-board applications.

Key Parameters

Parameter	Value
Manufacturer Part Number	75160-103-36
Manufacturer	Amphenol ICC (FCI)
Category	Rectangular Connectors
Connector Type	Header
Contact Type	Male Pin
Number of Positions	36
Pitch - Mating	0.100" (2.54mm)
Number of Rows	1
Mounting Type	Through Hole
Termination	Solder
Fastening Type	Push-Pull
Contact Material	Phosphor Bronze
Contact Finish - Mating	Gold, GXT™
Insulation Material	Thermoplastic
Insulation Color	Black
Material Flammability Rating	UL94 V-0
Product Status	Obsolete
RoHS Status	RoHS non-compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution for the 75160-103-36 is determined by the following critical parameters:

Connector Type & Contact Type: Header with male pins
Position Count & Pitch: 36 positions at 0.100" (2.54mm) mating pitch
Mounting Configuration: Through-hole, single-row, unshrouded, board-to-board
Termination Method: Solder termination
Fastening Type: Push-Pull mechanism
Electrical & Environmental Compliance: UL94 V-0 flammability rating, MSL 1

Substitute parts are grouped into two categories based on contact material and finish specifications:

Group A - Preci-Dip 350 Series (Gold Finish): Parts 350-10-136-00-006101, 350-10-136-00-013101, and 350-10-136-01-666101 feature brass contacts with gold plating. These are active products with ROHS3 compliance and specified operating temperature range (-55°C to 125°C).

Group B - Preci-Dip 350 Series (Tin Finish): Parts 350-80-136-00-006101, 350-80-136-00-013101, and 350-80-136-01-666101 use brass contacts with tin plating, also active with ROHS3 compliance.

Group C - Preci-Dip 350-V3 Series (Mixed Finish): Part 350-V3-136-00-006101 combines gold mating finish with tin post finish on brass contacts.

Group D - Mill-Max 800 Series: Part 800-10-036-10-002000 features brass alloy contacts with gold finish and ROHS3 compliance.

Group E - Samtec HTS Series: Parts HTS-136-G-A and HTS-136-G-A-1 are high-temperature single-row headers with gold contact finish and ROHS3 compliance.

Parameter Comparison

Parameter	75160-103-36	350-10-136-00-006101	350-80-136-00-006101	350-V3-136-00-006101	800-10-036-10-002000	HTS-136-G-A
Manufacturer	Amphenol ICC	Preci-Dip	Preci-Dip	Preci-Dip	Mill-Max	Samtec
Number of Positions	36	36	36	36	36	36
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Number of Rows	1	1	1	1	1	1
Connector Type	Header	Header	Header	Header	Header	Header
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Termination	Solder	Solder	Solder	Solder	Solder	Solder
Fastening Type	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Not specified
Contact Material	Phosphor Bronze	Brass	Brass	Brass	Brass Alloy	Not specified
Contact Finish - Mating	Gold, GXT™	Gold	Tin	Gold	Gold	Gold
Insulation Material	Thermoplastic	PCT, Polyester, Glass Filled	PCT, Polyester, Glass Filled	PCT, Polyester, Glass Filled	PCT	Not specified
Insulation Color	Black	Black	Black	Black	Black	Black
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	Not specified	Not specified
Product Status	Obsolete	Active	Active	Active	Active	Active
RoHS Status	RoHS non-compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
MSL	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	Not specified

Engineering Selection Recommendations

For RoHS3 Compliance Requirements: All substitute parts listed (Preci-Dip 350 series, Mill-Max 800 series, and Samtec HTS series) are ROHS3 compliant, whereas the original 75160-103-36 is RoHS non-compliant. Selection of any active substitute part satisfies modern regulatory compliance mandates.

For Active Product Status: The original 75160-103-36 is obsolete. All recommended substitutes maintain active product status with established supply chains and manufacturer support. Preci-Dip 350 series variants offer the highest inventory availability (842–1057 pieces in stock).

For Contact Finish Selection: Gold-finished variants (350-10-136-00-006101, 350-V3-136-00-006101, 800-10-036-10-002000, HTS-136-G-A, HTS-136-G-A-1) provide corrosion resistance comparable to the original GXT™ gold finish. Tin-finished variants (350-80-136-00-006101, 350-80-136-00-013101, 350-80-136-01-666101) are suitable for applications where cost optimization is prioritized over extended environmental exposure.

For Operating Temperature Range: Preci-Dip 350 series and Samtec HTS series specify operating temperature range of -55°C to 125°C. The original part does not specify operating temperature limits. Selection of these active parts provides defined thermal performance boundaries.

For Termination Flexibility: Preci-Dip parts 350-10-136-01-666101 and 350-80-136-01-666101 offer dual termination capability (Press-Fit and Solder), providing design flexibility beyond the solder-only original specification.

Frequently Asked Questions (FAQ)

Q: Can the Preci-Dip 350 series parts directly replace the Amphenol ICC 75160-103-36?

A: Yes. Both maintain identical 36-position, 0.100" (2.54mm) pitch, single-row, through-hole header configuration with male pins, solder termination, and push-pull fastening. Mechanical and electrical interfaces are compatible. The primary differences are contact material (brass vs. phosphor bronze), finish specifications, and compliance certifications.

Q: What is the difference between the Preci-Dip 350-10 and 350-80 series?

A: The 350-10 series features gold contact finish, while the 350-80 series uses tin contact finish. Both use brass contact material and are ROHS3 compliant. Contact finish selection depends on application requirements for corrosion resistance and cost considerations.

Q: Does the Mill-Max 800-10-036-10-002000 include operating temperature specifications?

A: Operating temperature range is not specified in the provided data for the Mill-Max part. Preci-Dip and Samtec alternatives provide defined operating temperature of -55°C to 125°C.

Q: Are the Samtec HTS-136-G-A and HTS-136-G-A-1 interchangeable?

A: Both parts share identical specifications for 36-position, 0.100" pitch headers with gold finish and ROHS3 compliance. Differences, if any, are not detailed in the provided parameters. Consult manufacturer documentation for variant-specific distinctions.

Q: What packaging options are available for substitute parts?

A: Preci-Dip 350 series and Mill-Max 800 series are supplied in bulk packaging. Samtec HTS series is supplied in tube packaging. Packaging selection may affect handling, storage, and integration into production workflows.

Q: Is the original 75160-103-36 still available for purchase?

A: The part is classified as obsolete. While 938 pieces are noted as in stock, no new manufacturing is occurring. Substitute parts with active product status are recommended for new designs and long-term production continuity.

Q: What compliance certifications apply to all substitute parts?

A: All substitute parts are ROHS3 compliant and REACH unaffected. All carry ECCN EAR99 classification and HTSUS code 8536.69.4040. Moisture sensitivity level is 1 (Unlimited) across all variants.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message