74HC4016D,652 Equivalent & Substitute Parts

Part Overview

The 74HC4016D,652 is a 4-circuit SPST-NO analog switch manufactured by Nexperia USA Inc., designed for signal routing and multiplexing applications in the 2V to 10V supply range. This part features 120Ohm on-state resistance and operates across -40°C to 125°C. The device is classified as obsolete, necessitating identification of functionally equivalent alternatives from active or last-time-buy product lines to ensure design continuity and supply chain reliability.

Key Parameters

Parameter	Value
Manufacturer Part Number	74HC4016D,652
Manufacturer	Nexperia USA Inc.
Switch Circuit Type	SPST - NO
Number of Circuits	4
Multiplexer/Demultiplexer Circuit	1:1
On-State Resistance (Max)	120Ohm
Channel-to-Channel Matching (ΔRon)	9Ohm
Voltage - Supply, Single (V+)	2V ~ 10V
Switch Time (Ton, Toff) (Max)	28ns, 22ns
-3dB Bandwidth	160MHz
Channel Capacitance (CS(off), CD(off))	4.6pF
Current - Leakage (IS(off)) (Max)	1µA
Crosstalk	-60dB @ 1MHz
Operating Temperature	-40°C ~ 125°C (TA)
Package / Case	14-SOIC (0.154", 3.90mm Width)
Mounting Type	Surface Mount
RoHS Status	ROHS3 Compliant
Product Status	Obsolete

Substitute Part Grouping Explanation

Substitution of the 74HC4016D,652 is determined by the following critical parameters:

Mandatory Compatibility Criteria:

Switch circuit type: SPST - NO (single-pole, single-throw, normally open)
Number of circuits: 4
Multiplexer configuration: 1:1
Package type: 14-SOIC (0.154", 3.90mm Width)
Supply voltage range: Must encompass or be compatible with 2V ~ 10V
Mounting type: Surface Mount

Performance Parameters Affecting Substitution:

On-state resistance (Ron): Determines signal attenuation and power dissipation
Channel-to-channel matching (ΔRon): Affects signal uniformity across channels
Switch time (Ton, Toff): Impacts switching speed and settling time
-3dB bandwidth: Determines maximum signal frequency capability
Channel capacitance: Affects signal integrity at high frequencies
Leakage current: Influences off-state isolation quality
Crosstalk: Determines inter-channel isolation performance
Operating temperature range: Must support application requirements

Substitute parts are grouped into two categories: upgrade substitutes (improved specifications) and similar substitutes (comparable or alternative specifications within the same functional class).

Parameter Comparison

Parameter	74HC4016D,652 (Main)	CD74HC4016M96	CD74HC4016MT	CD74HC4066M	CD74HC4066M96	CD74HC4066MT	D24066QM96G4Q1	SN74HC4066D	SN74HC4066DR	SN74HC4066DT	TS12A44514DR
Manufacturer	Nexperia USA Inc.	Texas Instruments	Texas Instruments	Texas Instruments	Texas Instruments	Texas Instruments	Texas Instruments	Texas Instruments	Texas Instruments	Texas Instruments	Texas Instruments
Switch Circuit Type	SPST - NO	SPST - NO	SPST - NO	SPST - NO	SPST - NO	SPST - NO	SPST - NO	SPST - NO	SPST - NO	SPST - NO	SPST - NO
Number of Circuits	4	4	4	4	4	4	4	4	4	4	4
Multiplexer Configuration	1:1	1:1	1:1	1:1	1:1	1:1	1:1	1:1	1:1	1:1	1:1
On-State Resistance (Max)	120Ohm	170Ohm	170Ohm	70Ohm	70Ohm	70Ohm	95Ohm	30Ohm (Typ)	30Ohm (Typ)	30Ohm (Typ)	10Ohm
Channel-to-Channel Matching (ΔRon)	9Ohm	8.5Ohm	8.5Ohm	500mOhm	500mOhm	500mOhm	1Ohm	-	-	-	2.5Ohm (Max)
Voltage - Supply, Single (V+)	2V ~ 10V	2V ~ 10V	2V ~ 10V	2V ~ 10V	2V ~ 10V	2V ~ 10V	4.5V ~ 5.5V	2V ~ 6V	2V ~ 6V	2V ~ 6V	2.7V ~ 12V
Switch Time Ton (Max)	28ns	-	-	-	-	-	24ns	31ns	31ns	31ns	75ns
Switch Time Toff (Max)	22ns	-	-	-	-	-	35ns	34ns	34ns	34ns	45ns
-3dB Bandwidth	160MHz	20MHz	20MHz	200MHz	200MHz	200MHz	200MHz	30MHz	30MHz	30MHz	530MHz
Channel Capacitance (CS(off), CD(off))	4.6pF	10pF	10pF	5pF	5pF	5pF	5pF	0.5pF, 9pF	0.5pF, 9pF	0.5pF, 9pF	8pF, 8pF
Current - Leakage (IS(off)) (Max)	1µA	100nA	100nA	100nA	100nA	100nA	-	100nA	100nA	100nA	1nA
Crosstalk	-60dB @ 1MHz	-	-	-72dB @ 1MHz	-72dB @ 1MHz	-72dB @ 1MHz	-72dB @ 1MHz	-45dB @ 1MHz	-45dB @ 1MHz	-45dB @ 1MHz	-
Operating Temperature	-40°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-40°C ~ 125°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C
Package / Case	14-SOIC	14-SOIC	14-SOIC	14-SOIC	14-SOIC	14-SOIC	14-SOIC	14-SOIC	14-SOIC	14-SOIC	14-SOIC
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Product Status	Obsolete	Last Time Buy	Last Time Buy	Last Time Buy	Active	Last Time Buy	Last Time Buy	Last Time Buy	Last Time Buy	Last Time Buy	Active

Engineering Selection Recommendations

Upgrade Substitutes (Improved Performance):

CD74HC4016M96 and CD74HC4016MT are direct upgrades from Texas Instruments with identical supply voltage range (2V ~ 10V) and package configuration. These parts feature lower leakage current (100nA vs. 1µA) and improved channel-to-channel matching (8.5Ohm vs. 9Ohm). On-state resistance increases to 170Ohm, which may require circuit re-evaluation for applications sensitive to signal attenuation. Both parts are in Last Time Buy status, providing limited availability window.

Similar Substitutes (Comparable Functionality):

CD74HC4066M, CD74HC4066M96, and CD74HC4066MT offer superior performance with 70Ohm on-state resistance, 500mOhm channel matching, and 200MHz bandwidth. These parts support the full 2V ~ 10V supply range and extended temperature operation (-55°C ~ 125°C). CD74HC4066M96 is the only active product in this group, ensuring long-term availability. All three variants are functionally interchangeable, differing only in packaging (Tube, Cut Tape, or Tape & Reel).

D24066QM96G4Q1 is an automotive-grade alternative (AEC-Q100 qualified) with 95Ohm on-state resistance and restricted supply range (4.5V ~ 5.5V). This part is suitable only for 5V-centric designs and automotive applications.

SN74HC4066D, SN74HC4066DR, and SN74HC4066DT provide the lowest on-state resistance (30Ohm typical) but operate within a narrower supply range (2V ~ 6V) and reduced temperature range (-40°C ~ 85°C). These variants are suitable for low-voltage, lower-temperature applications where the supply voltage constraint is acceptable.

TS12A44514DR offers the lowest on-state resistance (10Ohm) and highest bandwidth (530MHz) with extended supply range (2.7V ~ 12V). This part is active and provides superior performance for high-frequency applications, though it operates within -40°C ~ 85°C temperature range.

Selection Criteria:

For direct replacement with minimal circuit redesign: CD74HC4066M96 (active status, comparable Ron, superior bandwidth)
For extended temperature operation: CD74HC4066M, CD74HC4066M96, or CD74HC4066MT (-55°C ~ 125°C)
For 5V-only automotive applications: D24066QM96G4Q1 (AEC-Q100 qualified)
For high-frequency signal routing: TS12A44514DR (530MHz bandwidth, active status)
For low-voltage, low-resistance applications: SN74HC4066DR (30Ohm typical, active status)

All recommended substitutes maintain ROHS3 compliance and 14-SOIC package compatibility.

Frequently Asked Questions (FAQ)

Q: Can I directly replace 74HC4016D,652 with CD74HC4066M96?

A: Yes. Both devices are 4-circuit SPST-NO switches in 14-SOIC packages with identical supply voltage range (2V ~ 10V). CD74HC4066M96 features lower on-state resistance (70Ohm vs. 120Ohm), superior bandwidth (200MHz vs. 160MHz), and lower leakage current (100nA vs. 1µA). Circuit performance will improve with this substitution. CD74HC4066M96 is currently active, ensuring supply availability.

Q: What is the difference between CD74HC4016M96 and CD74HC4066M96?

A: Both are Texas Instruments 4-circuit SPST-NO switches in 14-SOIC packages with 2V ~ 10V supply range. CD74HC4016M96 has 170Ohm on-state resistance and 20MHz bandwidth. CD74HC4066M96 has 70Ohm on-state resistance and 200MHz bandwidth. CD74HC4066M96 provides superior performance for signal routing applications. The base part numbers (74HC4016 vs. 74HC4066) indicate different internal designs optimized for different resistance and bandwidth characteristics.

Q: Can I use TS12A44514DR in place of 74HC4016D,652?

A: Yes, with supply voltage considerations. TS12A44514DR is a 4-circuit SPST-NO switch in 14-SOIC package with extended supply range (2.7V ~ 12V), encompassing the original 2V ~ 10V range. It offers superior performance: 10Ohm on-state resistance, 530MHz bandwidth, and 1nA leakage current. Operating temperature is -40°C ~ 85°C, which is narrower than the original -40°C ~ 125°C. TS12A44514DR is currently active and recommended for high-frequency applications.

Q: Why do some substitutes have narrower supply voltage ranges?

A: Different switch architectures and manufacturing processes result in varying supply voltage specifications. SN74HC4066D operates at 2V ~ 6V due to its internal circuit design. D24066QM96G4Q1 is restricted to 4.5V ~ 5.5V for automotive-grade performance. When selecting substitutes, verify that the application supply voltage falls within the substitute part's specified range.

Q: What is the significance of "Last Time Buy" status?

A: Last Time Buy indicates the manufacturer will discontinue the product after a specified date. Customers must place final orders before this cutoff. CD74HC4016M96, CD74HC4016MT, CD74HC4066M, CD74HC4066MT, D24066QM96G4Q1, SN74HC4066D, SN74HC4066DR, and SN74HC4066DT are all in Last Time Buy status. CD74HC4066M96 and TS12A44514DR are active products with indefinite availability.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts maintain ROHS3 compliance, matching the original 74HC4016D,652 environmental standard.

Q: What packaging options are available for CD74HC4066M96?

A: CD74HC4066M96 is supplied in Cut Tape (CT) & Digi-Reel packaging. Related variants include CD74HC4066M (Tube) and CD74HC4066MT (Tape & Reel). All three variants are electrically identical; packaging selection depends on assembly process requirements and order quantities.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message