7201P3DAV2ME Toggle Switch DPDT Equivalent & Substitute Parts

Part Overview

The 7201P3DAV2ME is a panel-mount toggle switch manufactured by C&K, configured as a double-pole double-throw (DPDT) switch with On-On functionality. This component is rated for 5A at 120V AC and 28V DC, featuring a flat anti-rotation actuator and epoxy sealed terminals. The part is currently classified as obsolete, making identification of equivalent and substitute components essential for ongoing system support and procurement.

Substiute Parts

7201P3DAV2ME

C&KIn Stock: 8177201P3DAV2ME Datasheet

Current PartRFQ

7201P3DAV2SE

C&KIn Stock: 10847201P3DAV2SE Datasheet

DirectRFQ

34ADP11B1M7RT

Grayhill Inc.In Stock: 89434ADP11B1M7RT Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute components for the 7201P3DAV2ME are identified based on the following critical parameters that determine functional and mechanical compatibility:

Primary Compatibility Criteria:

• Circuit configuration: DPDT
• Switch function: On-On
• Mounting type: Panel Mount, Right Angle, Vertical
• Panel cutout dimensions: Circular - 6.35mm Dia
• Bushing thread: 1/4-40
• Termination style: PC Pin
• Operating temperature range: -30°C to 85°C

Electrical Rating Considerations:

• Current rating must equal or exceed 5A (AC/DC)
• Voltage ratings must meet or exceed 120V AC and 28V DC

Substitutes are categorized as direct equivalents when all mechanical and electrical parameters align with the original specification. Similar substitutes may have reduced electrical ratings or different actuator characteristics but maintain mechanical compatibility and circuit configuration.

Parameter Comparison

Engineering Selection Recommendations

7201P3DAV2SE (Direct Equivalent - Recommended Primary Substitute)

The 7201P3DAV2SE is the direct equivalent replacement for the obsolete 7201P3DAV2ME. Both components share identical electrical ratings (5A at 120V AC / 28V DC), mechanical configuration, and circuit topology. The 7201P3DAV2SE is currently in active production status with improved compliance: it is RoHS Compliant and REACH Affected, compared to the non-compliant status of the original part. This substitute maintains 100,000 electrical life cycles and all mechanical parameters required for direct panel mount installation. Selection of this part eliminates obsolescence risk while preserving full functional compatibility.

34ADP11B1M7RT (Similar Substitute - Limited Application)

The 34ADP11B1M7RT from Grayhill Inc. maintains mechanical compatibility through identical panel cutout dimensions, bushing thread, and mounting configuration. However, this component has significantly reduced electrical ratings (0.4VA at 20V AC/DC versus 5A at 120V AC / 28V DC) and lower electrical life (40,000 cycles versus 100,000 cycles). This substitute is suitable only for applications where the original circuit operates at reduced voltage and current levels below the 34ADP11B1M7RT specifications. The part is ROHS3 Compliant and REACH Unaffected. Direct substitution without circuit redesign is not recommended for applications requiring the full 5A / 120V AC rating of the original component.

Frequently Asked Questions (FAQ)

Q: Can the 7201P3DAV2SE be used as a direct replacement for the 7201P3DAV2ME without any modifications?

A: Yes. The 7201P3DAV2SE is a direct equivalent with identical electrical ratings, circuit configuration, and mechanical dimensions. No circuit modifications or panel redesign are required. The only difference is improved RoHS compliance status.

Q: What are the limitations of using the 34ADP11B1M7RT as a substitute?

A: The 34ADP11B1M7RT has reduced electrical ratings (0.4VA at 20V versus 5A at 120V AC / 28V DC) and lower electrical life (40,000 cycles versus 100,000 cycles). This substitute is only compatible with applications operating at significantly lower voltage and current levels. It is not suitable for circuits designed for the full 5A / 120V AC specification.

Q: Are there any panel cutout or mounting differences between the substitute parts?

A: No. All three components share identical panel cutout dimensions (Circular - 6.35mm Dia) and bushing thread specifications (1/4-40). Panel modifications are not required when switching between these parts.

Q: What is the difference in RoHS compliance between the original and substitute parts?

A: The 7201P3DAV2ME is RoHS non-compliant. The 7201P3DAV2SE is RoHS Compliant, and the 34ADP11B1M7RT is ROHS3 Compliant. For applications subject to RoHS regulations, the 7201P3DAV2SE is the recommended substitute.

Q: Do all substitute parts have the same operating temperature range?

A: Yes. All three components operate across the identical temperature range of -30°C to 85°C.

Q: What is the difference in electrical life between the original and the Grayhill substitute?

A: The 7201P3DAV2ME and 7201P3DAV2SE both provide 100,000 electrical life cycles. The 34ADP11B1M7RT provides 40,000 cycles, representing a 60% reduction in rated electrical life.