C&K 7201MD8AV2LE Toggle Switch DPDT Equivalent & Substitute Parts

Part Overview

The C&K 7201MD8AV2LE is a toggle switch with DPDT (Double Pole Double Throw) configuration, rated for 5A at 120V AC and 28V DC. This component features a through-hole, right-angle vertical mounting design with epoxy sealed terminals and a standard round brass chrome-plated actuator. The part is classified as obsolete, necessitating identification of active equivalent alternatives that maintain identical electrical and mechanical specifications for continued system support and new designs.

Substiute Parts

7201MD8AV2LE

C&KIn Stock: 9587201MD8AV2LE Datasheet

Current PartRFQ

7201MD8AV2RE

C&KIn Stock: 9617201MD8AV2RE Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 7201MD8AV2LE is determined by strict equivalence across the following critical parameters:

• Circuit configuration (DPDT)
• Switch function (On-On)
• Current rating (5A AC/DC)
• Voltage ratings (120V AC, 28V DC)
• Mounting type (Through Hole, Right Angle, Vertical)
• Actuator specifications (Standard Round, 6.86mm length)
• Termination style (PC Pin)
• Operating temperature range (-30°C to 85°C)
• Electrical life (100,000 Cycles)
• Base product number (7201MD)

The C&K 7201MD8AV2RE maintains complete electrical and mechanical compatibility with the 7201MD8AV2LE, differing only in product status and regulatory compliance classifications.

Parameter Comparison

Engineering Selection Recommendations

The C&K 7201MD8AV2RE is the direct functional equivalent of the 7201MD8AV2LE. Both components share identical electrical ratings, mechanical dimensions, and circuit performance characteristics. The primary distinction lies in product lifecycle status and regulatory compliance:

The 7201MD8AV2LE is classified as obsolete, indicating discontinued manufacturing and limited availability. The 7201MD8AV2RE maintains active production status with full availability.

The 7201MD8AV2RE achieves RoHS compliance and REACH affected status, whereas the 7201MD8AV2LE is RoHS non-compliant and REACH unaffected. For applications subject to RoHS or REACH regulatory requirements, the 7201MD8AV2RE is the appropriate selection. For legacy systems or applications without regulatory constraints, either part satisfies the electrical and mechanical requirements.

Frequently Asked Questions (FAQ)

Q: Are the 7201MD8AV2LE and 7201MD8AV2RE electrically interchangeable?

A: Yes. Both components are rated for 5A at 120V AC and 28V DC with identical DPDT On-On switching function and 100,000 cycle electrical life.

Q: What is the difference between these two parts?

A: The 7201MD8AV2LE is obsolete with RoHS non-compliant status. The 7201MD8AV2RE is actively manufactured and RoHS compliant. All electrical and mechanical specifications are identical.

Q: Can I use the 7201MD8AV2RE as a direct replacement in existing designs?

A: Yes. The 7201MD8AV2RE maintains the same through-hole, right-angle vertical mounting configuration, PC pin termination, and physical dimensions as the 7201MD8AV2LE.

Q: Which part should I specify for new designs?

A: The 7201MD8AV2RE should be specified for new designs due to active production status and RoHS compliance.

Q: Are there any performance differences between these parts?

A: No. Both components operate identically across all provided electrical and mechanical parameters within the -30°C to 85°C operating temperature range.