Keystone Electronics 7061 LED Holder T1 3MM Equivalent & Substitute Parts

Part Overview

The Keystone Electronics 7061 is a T1 LED standoff holder manufactured from natural nylon with a length of 0.924" (23.48mm). This component is designed to mechanically support and position T1 3mm LEDs in electronic assemblies. The part is classified as obsolete, making identification of equivalent and substitute components necessary for ongoing production support and design updates. Substitute parts must maintain compatibility with T1 LED form factors and nylon construction specifications.

Substiute Parts

7061

Keystone ElectronicsIn Stock: 9887061 Datasheet

Current PartRFQ

7382

CEC IndustriesIn Stock: 9467382 Datasheet

MFR RecommendedRFQ

7060

Keystone ElectronicsIn Stock: 7657060 Datasheet

Parametric EquivalentRFQ

7381

CEC IndustriesIn Stock: 9037381 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the Keystone Electronics 7061 is determined by the following critical parameters:

• LED Form Factor: T1 3mm compatibility
• Material Composition: Nylon construction
• Color: Natural finish
• Length Tolerance: Mechanical standoff height within acceptable assembly clearance
• Regulatory Compliance: ROHS3 and REACH status alignment

The substitute parts identified (7060, 7381, 7382) share the T1 LED compatibility specification. Part 7060 is a parametric equivalent from the same manufacturer with a slightly reduced length of 0.900" (22.85mm). Parts 7381 and 7382 are from CEC Industries and represent alternative lamp assemblies with T-1.75 lens sizes and bi-pin lead configurations, indicating a different functional category despite T1 designation overlap.

Parameter Comparison

Engineering Selection Recommendations

Keystone Electronics 7060 is the primary parametric equivalent for the 7061. Both parts are manufactured by Keystone Electronics, constructed from natural nylon, and maintain ROHS3 compliance and REACH unaffected status. The length difference of 0.024" (0.63mm) between the 7061 (0.924") and 7060 (0.900") represents a minor mechanical variation suitable for applications where standoff height tolerance permits this reduction.

CEC Industries 7381 and 7382 represent a different functional category. These are complete lamp assemblies with bi-pin lead configurations and specified voltage ratings (6.3V and 14V respectively), rather than passive LED holder standoffs. Selection of these parts requires confirmation that the application requires an active light source with integrated leads rather than a mechanical holder for a separate LED component.

For applications requiring the exact 7061 specification, the 7060 provides the closest functional match with active inventory availability and maintained regulatory compliance.

Frequently Asked Questions (FAQ)

Q: Can the Keystone Electronics 7060 directly replace the 7061 in existing assemblies?

A: The 7060 is mechanically compatible with T1 3mm LEDs and shares material, color, and regulatory compliance specifications. The length reduction of 0.024" (0.63mm) must be evaluated against assembly clearance and standoff height requirements specific to your application.

Q: What is the functional difference between the Keystone holders (7060, 7061) and the CEC Industries lamps (7381, 7382)?

A: Keystone 7060 and 7061 are passive mechanical holders designed to position T1 LEDs within an assembly. CEC Industries 7381 and 7382 are complete lamp assemblies with integrated light sources, specified voltage ratings, and bi-pin leads. These serve different functional roles and are not interchangeable without circuit redesign.

Q: Are all substitute parts ROHS3 compliant?

A: Keystone Electronics 7060 is confirmed ROHS3 compliant and REACH unaffected. Regulatory compliance status for CEC Industries 7381 and 7382 is not specified in the available data.

Q: What packaging is provided for these parts?

A: Packaging specifications are not provided in the available technical data for any of these parts.

Q: How do I determine which substitute is appropriate for my design?

A: Evaluate your application requirements against the following criteria: (1) whether a passive mechanical holder or active light source is required, (2) acceptable standoff height tolerance, (3) regulatory compliance requirements for your end application, and (4) inventory availability for production timelines.