LED Panel Indicator Green 24V 6861232142F

Part Overview

The Dialight 6861232142F is an LED panel indicator designed for 24V DC applications with a green lamp color and 30° viewing angle. This component features a round domed lens with a 18.00mm diameter and delivers 25000mcd brightness output. The part is classified as obsolete, making substitute components necessary for new designs and ongoing production requirements. The component uses solder lug termination for direct circuit board integration.

Substiute Parts

6861232142F

DialightIn Stock: 8646861232142F Datasheet

Current PartRFQ

FL1P-16NJ-1-G24V

Mallory Sonalert Products Inc.In Stock: 738FL1P-16NJ-1-G24V Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the 6861232142F is determined by the following critical parameters:

• Voltage rating compatibility (24V AC/DC operation)
• Green lamp color specification
• Solder lug termination requirement
• Panel cutout dimensions within acceptable mechanical tolerance (0.63" to 0.65")
• Lens diameter compatibility (15.80mm to 18.00mm range)
• Current consumption within system design limits

The FL1P-16NJ-1-G24V from Mallory Sonalert Products Inc. meets these substitution criteria. While this substitute exhibits different brightness output (8000-10000mcd versus 25000mcd) and viewing angle (60° versus 30°), it maintains electrical compatibility through identical voltage rating, current operation within acceptable parameters, and matching termination style. The mechanical interface remains compatible through similar panel cutout dimensions and round lens configuration.

Parameter Comparison

Engineering Selection Recommendations

The FL1P-16NJ-1-G24V serves as a direct substitute for the obsolete 6861232142F based on electrical and mechanical compatibility. Both components are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements. The substitute operates at lower current consumption (20mA versus 30mA), reducing system power demand. The substitute's AC/DC rating provides broader application flexibility compared to the original DC-only specification.

Design considerations include the reduced brightness output of the substitute (8000-10000mcd versus 25000mcd) and the wider viewing angle (60° versus 30°). These differences may affect visibility characteristics in specific panel mounting configurations. The substitute's smaller lens diameter (15.80mm versus 18.00mm) and flat-top lens style represent minor aesthetic differences from the original component.

Frequently Asked Questions (FAQ)

Q: Can the FL1P-16NJ-1-G24V directly replace the 6861232142F in existing designs?

A: Yes, the substitute maintains electrical compatibility through matching 24V voltage rating and solder lug termination. The panel cutout dimensions are within acceptable tolerance (0.63" versus 0.65"). Design verification is necessary to confirm brightness and viewing angle differences do not impact application requirements.

Q: What are the key differences between these components?

A: The primary differences are brightness output (8000-10000mcd versus 25000mcd), viewing angle (60° versus 30°), current consumption (20mA versus 30mA), and lens style (flat top versus domed top). The substitute offers AC/DC operation versus DC-only on the original.

Q: Are both components RoHS compliant?

A: Yes, both the 6861232142F and FL1P-16NJ-1-G24V are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory standards.

Q: What is the impact of the lower current rating on system design?

A: The substitute's 20mA rating versus the original 30mA reduces power consumption by approximately 33%, potentially lowering system heat generation and improving overall efficiency.

Q: Does the panel cutout dimension difference affect mechanical compatibility?

A: The cutout dimensions are within acceptable tolerance (0.63" to 0.65"). Standard panel mounting hardware accommodates this variation. Physical verification in the target application is recommended.