LINE FILTER 250VAC 10A CHASSIS 6609041-3

Part Overview

The TE Connectivity Corcom Filters model 6609041-3 is a single phase EMC/EMI line filter rated for 250VAC at 10A with 50/60Hz operation. This chassis mount filter features two-stage configuration with quick connect termination and is designed for general purpose applications requiring electromagnetic compatibility filtering.

The 6609041-3 is classified as obsolete. Locating active equivalent models becomes necessary for new designs, procurement continuity, and long-term system support where original inventory becomes depleted.

Substiute Parts

6609041-3
TE Connectivity Corcom FiltersIn Stock: 10086609041-3 Datasheet
6609041-3
Current Part
10VW1
TE Connectivity Corcom FiltersIn Stock: 163610VW1 Datasheet
10VW1
Direct

Key Parameters

Parameter Value
Manufacturer TE Connectivity Corcom Filters
Series W
Filter Type Single Phase
Configuration Two Stage
Voltage - Rated AC 250V
Current 10 A
Frequency - Operating 50/60Hz
Mounting Type Chassis Mount
Termination Style Quick Connect
Approval Agency CSA, UR, VDE
Operating Temperature -10°C ~ 40°C

Substitute Part Grouping Explanation

Substitution of the obsolete 6609041-3 is based on electrical and mechanical parameter alignment within the TE Connectivity Corcom Filters W series product line. The substitute part 10VW1 maintains functional equivalence through matching specifications in the following critical parameters:

  • Single phase filter topology
  • Two-stage EMC/EMI configuration
  • 250VAC rated voltage
  • 10A current rating
  • 50/60Hz operating frequency
  • Chassis mount mechanical interface
  • Quick connect termination style
  • Identical approval certifications (CSA, UR, VDE)
  • Equivalent operating temperature range

The 10VW1 represents the active production equivalent within the same manufacturer's product family, ensuring direct functional replacement capability.

Parameter Comparison

Parameter 6609041-3 (Main Part) 10VW1 (Substitute)
Manufacturer TE Connectivity Corcom Filters TE Connectivity Corcom Filters
Series W W
Filter Type Single Phase Single Phase
Configuration Two Stage Two Stage
Voltage - Rated AC 250V 250V
Current 10 A 10 A
Frequency - Operating 50/60Hz 50/60Hz
Mounting Type Chassis Mount Chassis Mount
Termination Style Quick Connect Quick Connect
Approval Agency CSA, UR, VDE CSA, UR, VDE
Operating Temperature -10°C ~ 40°C -10°C ~ 40°C
Inductance 1.25mH 1.2mH
Product Status Obsolete Active

Engineering Selection Recommendations

The 10VW1 serves as the direct active equivalent for the obsolete 6609041-3. Both components share identical electrical ratings, mechanical interfaces, and regulatory certifications from CSA, UR, and VDE. The 10VW1 maintains active production status with higher inventory availability (1599 pcs vs. 924 pcs), ensuring supply chain continuity for new designs and replacement applications.

The inductance specification differs marginally (1.2mH versus 1.25mH), representing a 4% variance within typical component tolerance ranges for this filter category. Both parts comply with RoHS3 and REACH requirements where applicable, supporting modern environmental and regulatory standards.

Selection of the 10VW1 eliminates obsolescence risk while maintaining full functional and mechanical compatibility with existing 6609041-3 circuit implementations.

Frequently Asked Questions (FAQ)

Q: Can the 10VW1 directly replace the 6609041-3 in existing applications?

A: Yes. The 10VW1 provides direct functional replacement. Both components share identical voltage ratings (250VAC), current capacity (10A), frequency operation (50/60Hz), mounting configuration (chassis mount), and termination style (quick connect). Regulatory certifications are equivalent across both parts.

Q: What is the significance of the inductance difference between these parts?

A: The 10VW1 specifies 1.2mH inductance compared to 1.25mH for the 6609041-3. This 4% variance falls within standard component tolerance specifications for EMI/EMI line filters and does not affect functional compatibility or performance in general purpose applications.

Q: Why is the 6609041-3 classified as obsolete?

A: The 6609041-3 has been discontinued by TE Connectivity Corcom Filters. The 10VW1 represents the active production model within the W series product line, offering equivalent specifications with ongoing manufacturing support.

Q: Are there packaging differences between these parts?

A: The 6609041-3 is supplied in standard packaging, while the 10VW1 is available in bulk packaging. Both maintain identical electrical and mechanical specifications. Packaging selection depends on procurement volume and inventory management requirements.

Q: Do both parts meet current regulatory standards?

A: The 10VW1 carries active RoHS3 compliance and REACH unaffected status. Both components maintain CSA, UR, and VDE certifications required for industrial and general purpose filtering applications.

Request Quote (Ships tomorrow)