TE Connectivity AMP Connectors 650406-5 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 650406-5 is a 150 Position DIN Receptacle connector with female sockets, gold-plated contacts, and through-hole termination. This backplane connector is part of the Eurocard series and is designed for PCB mounting applications requiring high-density interconnection. The part is currently active in production with 882 pieces available in new original inventory.

Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across connector specifications, allowing for component interchangeability in applications where the primary part may be unavailable or when alternative compliance certifications are required.

Substiute Parts

650406-5

TE Connectivity AMP ConnectorsIn Stock: 906650406-5 Datasheet

Current PartRFQ

5650406-5

TE Connectivity AMP ConnectorsIn Stock: 17365650406-5 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 650406-5 is determined by strict equivalence across the following critical parameters:

• Connector Configuration: Receptacle type with 150 female socket positions
• Electrical Spacing: 0.100" (2.54mm) pitch maintained across all three rows
• Physical Form Factor: Style C, 3-row DIN configuration
• PCB Integration: Through-hole solder termination for direct board mounting
• Contact Material: Gold plating for corrosion resistance and signal integrity
• Environmental Compliance: UL94 V-0 flammability rating and unlimited moisture sensitivity classification
• Thermal Performance: -55°C to 125°C operating temperature range

The substitute part 5650406-5 maintains all electrical and mechanical parameters identical to the primary part. Differences exist only in insulation material composition and RoHS compliance status, which do not affect functional interchangeability in equivalent applications.

Parameter Comparison

Engineering Selection Recommendations

Primary Part Selection (650406-5)

The 650406-5 is suitable for applications where RoHS non-compliant components are acceptable and polyester-based insulation material meets design requirements. This part maintains active production status with established supply availability.

Substitute Part Selection (5650406-5)

The 5650406-5 is functionally equivalent and provides identical electrical and mechanical performance. Selection of this substitute is appropriate for applications requiring RoHS compliance certification. The substitute part carries higher inventory availability (1681 pieces versus 882 pieces), providing improved supply chain flexibility. The insulation material differs (Polymer Thermoplastic versus Polyester), but both materials maintain the UL94 V-0 flammability rating and equivalent thermal performance across the -55°C to 125°C operating range.

Both parts are manufactured by TE Connectivity AMP Connectors and maintain identical connector specifications, pitch, row configuration, contact finish, and environmental ratings. Selection between these parts should be based on regulatory compliance requirements and material specification constraints specific to the application.

Frequently Asked Questions (FAQ)

Q: Are the 650406-5 and 5650406-5 electrically interchangeable?

A: Yes. Both parts are 150-position DIN receptacle connectors with identical electrical specifications, including 0.100" pitch, 3-row configuration, gold contact finish, and -55°C to 125°C operating temperature range. They are functionally equivalent for signal transmission and power distribution applications.

Q: What is the primary difference between these two parts?

A: The primary differences are RoHS compliance status and insulation material composition. The 650406-5 uses polyester-based insulation and is RoHS non-compliant. The 5650406-5 uses polymer thermoplastic insulation and is RoHS compliant. Both materials maintain UL94 V-0 flammability rating and equivalent thermal performance.

Q: Can I use the 5650406-5 as a direct replacement for the 650406-5 in existing designs?

A: Yes, the 5650406-5 is a direct functional substitute. All electrical and mechanical parameters are identical. If your application or regulatory environment requires RoHS compliance, the 5650406-5 is the appropriate selection.

Q: Are there any PCB layout or mounting differences between these connectors?

A: No. Both connectors use identical through-hole solder termination, 0.100" pitch spacing, and 3-row DIN configuration. PCB footprints and mounting requirements are identical.

Q: What is the moisture sensitivity level for both parts?

A: Both the 650406-5 and 5650406-5 carry MSL 1 (Unlimited) classification, indicating no moisture sensitivity restrictions for storage, handling, or assembly processes.

Q: Which part should I select for new designs?

A: For new designs, selection depends on regulatory and compliance requirements. If RoHS compliance is mandated, select the 5650406-5. If RoHS compliance is not required and polyester insulation material is specified, the 650406-5 is appropriate. Both parts are active in production with adequate inventory availability.

Q: Is there a significant inventory difference between these parts?

A: Yes. The 5650406-5 has 1681 pieces in stock compared to 882 pieces for the 650406-5. If supply chain continuity is a consideration, the 5650406-5 offers greater availability.