TE Connectivity 6345007-1 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 6345007-1 is a 120-position receptacle connector with female sockets, designed for backplane applications. This connector features a 2.00mm pitch, press-fit termination, and right-angle through-hole mounting. The part is currently active in production with 1,077 units in stock. Alternative equivalent parts are available to support design flexibility, inventory management, and supply chain continuity for backplane connector applications requiring similar electrical and mechanical specifications.

Substiute Parts

6345007-1

TE Connectivity AMP ConnectorsIn Stock: 11456345007-1 Datasheet

Current PartRFQ

17241101101

HARTINGIn Stock: 102917241101101 Datasheet

SimilarRFQ

HM2R70PA5100N9LF

Amphenol ICC (FCI)In Stock: 1633HM2R70PA5100N9LF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TE Connectivity 6345007-1 is determined by the following critical parameters:

Primary Substitution Criteria:

• Connector pitch: 0.079" (2.00mm)
• Connector type: Receptacle with female sockets
• Mounting configuration: Through hole, right angle
• Termination method: Press-fit
• Operating temperature range: -55°C to 125°C
• Contact finish: Gold plating

Position Count Consideration: The main part contains 120 positions (110 signal + 10 ground). Substitute parts with 110 positions (5 rows without dedicated ground row) are functionally equivalent when the application does not require the dedicated ground row configuration. The 5-row versus 5+1-row distinction represents a mechanical layout difference rather than an electrical incompatibility for applications where ground distribution is managed through signal ground pins.

Electrical Compatibility: Substitute parts must maintain minimum current and voltage ratings compatible with the application requirements. The main part specifies 1.5 A at 500Vrms. Substitute parts meeting or exceeding these ratings are electrically compatible.

Parameter Comparison

Engineering Selection Recommendations

TE Connectivity 6345007-1 (Primary Part) Select this part when the application requires 120 total positions with a dedicated ground row configuration (5+1 row layout). This part is the original specification and maintains full compatibility with designs developed around the Z-PACK series connector family.

HARTING 17241101101 (Substitute) This part is suitable for applications requiring 110 positions with a 5-row configuration when the dedicated ground row is not required. The current rating of 1.0 A is lower than the primary part; verify that the application current requirements do not exceed 1.0 A. Voltage rating is not specified; confirm compatibility with the 500Vrms minimum requirement. This part is ROHS3 compliant and REACH unaffected, providing regulatory advantages in certain markets. Packaging is supplied in tubes.

Amphenol ICC HM2R70PA5100N9LF (Substitute) This part is suitable for applications requiring 110 positions with a 5-row configuration. The current rating of 1.5 A and voltage rating of 750Vrms meet or exceed the primary part specifications. The board edge mounting option provides additional design flexibility compared to standard through-hole mounting. This part is RoHS compliant and REACH affected. Packaging is supplied in trays. Highest inventory availability at 1,547 units.

All three parts share identical pitch (2.00mm), termination method (press-fit), operating temperature range (-55°C to 125°C), contact finish (gold), and MSL rating (1). All parts are active in production status.

Frequently Asked Questions (FAQ)

Q: Can the HARTING 17241101101 or Amphenol ICC HM2R70PA5100N9LF be used as direct replacements for the TE Connectivity 6345007-1?

A: Both substitute parts are compatible with applications designed for 110-position connectors with 2.00mm pitch, press-fit termination, and right-angle through-hole mounting. The primary difference is the position count: the TE part provides 120 positions (with dedicated ground row), while the substitutes provide 110 positions (5-row layout). If the application design accommodates 110 positions, either substitute is compatible. If the dedicated ground row is required, only the TE part is suitable.

Q: What is the difference between the 5-row and 5+1-row configurations?

A: The TE Connectivity 6345007-1 features a 5+1-row layout with 120 total positions: 110 signal positions across 5 rows plus 10 dedicated ground positions in a separate row. The HARTING and Amphenol substitutes feature a 5-row layout with 110 total positions. The 5+1 configuration provides a dedicated ground distribution path, while the 5-row configuration requires ground distribution through signal ground pins. Select based on the application's ground distribution architecture.

Q: Are there current rating differences between these parts?

A: Yes. The TE Connectivity 6345007-1 and Amphenol ICC HM2R70PA5100N9LF both support 1.5 A per contact. The HARTING 17241101101 supports 1.0 A per contact. For applications requiring current levels between 1.0 A and 1.5 A, verify that the HARTING part meets the design specification before selection.

Q: What are the voltage rating differences?

A: The TE Connectivity 6345007-1 is rated for 500Vrms. The Amphenol ICC HM2R70PA5100N9LF is rated for 750Vrms, providing higher voltage capability. The HARTING 17241101101 does not specify a voltage rating; confirm compatibility with the 500Vrms minimum requirement for your application.

Q: How do the packaging formats differ?

A: The TE Connectivity 6345007-1 packaging format is not specified in the provided data. The HARTING 17241101101 is packaged in tubes. The Amphenol ICC HM2R70PA5100N9LF is packaged in trays. Packaging format may affect handling, storage, and assembly processes; verify compatibility with your procurement and manufacturing workflows.

Q: Are all three parts RoHS compliant?

A: Yes. The TE Connectivity 6345007-1 is RoHS compliant. The HARTING 17241101101 is ROHS3 compliant. The Amphenol ICC HM2R70PA5100N9LF is RoHS compliant. All three parts meet RoHS requirements for lead-free construction.

Q: What is the REACH status for each part?

A: The TE Connectivity 6345007-1 has undefined REACH status. The HARTING 17241101101 is REACH unaffected. The Amphenol ICC HM2R70PA5100N9LF is REACH affected. Verify REACH compliance requirements for your specific application and market region before final part selection.

Q: Can the Amphenol ICC part be used in applications requiring standard through-hole mounting?

A: The Amphenol ICC HM2R70PA5100N9LF features board edge mounting combined with through-hole termination. This configuration is compatible with through-hole mounting applications. The board edge feature provides additional mechanical support and positioning capability compared to standard through-hole-only designs.