Grayhill 62F22-02-P Rotary Encoder Optical 16PPR Equivalent & Substitute Parts

Part Overview

The Grayhill 62F22-02-P is an optical rotary encoder with 16 pulses per revolution (PPR), delivering quadrature incremental output. This vertical-mount encoder features a 1/4" diameter flatted end actuator, integrated detent mechanism, and built-in switch functionality. The device operates at 5V supply voltage and is designed for PCB through-hole mounting with PC pin termination.

The 62F22-02-P maintains Active product status with ROHS3 compliance and REACH unaffected classification. Substitute parts are identified to address application requirements where alternative pulse resolution or series variants are acceptable within the specified electrical and mechanical parameter constraints.

Substiute Parts

62F22-02-P

Grayhill Inc.In Stock: 83162F22-02-P Datasheet

Current PartRFQ

62N30-P

Grayhill Inc.In Stock: 82662N30-P Datasheet

SimilarRFQ

62S22-M5-P

Grayhill Inc.In Stock: 141762S22-M5-P Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 62F22-02-P are identified based on strict parameter matching across the following critical criteria:

Mandatory Matching Parameters:

• Encoder Type: Optical
• Output Type: Quadrature (Incremental)
• Voltage - Supply: 5V
• Actuator Type: 1/4" Dia Flatted End
• Detent: Yes
• Built in Switch: Yes
• Mounting Type: PCB, Through Hole
• Orientation: Vertical
• Termination Style: PC Pin
• Rotational Life: 1M cycles minimum
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Variable Parameter:

• Pulses per Revolution: Substitutes may differ in PPR specification while maintaining all other electrical and mechanical characteristics.

The substitute parts listed below satisfy all mandatory parameters. Differences in pulse resolution reflect alternative series variants within the Grayhill optical encoder product line, each maintaining identical supply voltage, mounting configuration, actuator geometry, and operational life specifications.

Parameter Comparison

Engineering Selection Recommendations

62S22-M5-P (Direct Series Equivalent)

The 62S22-M5-P is a direct functional equivalent to the 62F22-02-P. Both encoders deliver 16 pulses per revolution with identical electrical specifications (5V supply), mechanical configuration (1/4" flatted end actuator, vertical PCB through-hole mounting), and operational characteristics (1M cycle rotational life, integrated detent and switch). The 62S22-M5-P represents an alternative series variant within the Grayhill optical encoder portfolio, maintaining full compatibility with applications designed for 16 PPR quadrature output. Both parts carry ROHS3 compliance and MSL 1 rating.

62N30-P (Alternative Resolution Variant)

The 62N30-P provides 12 pulses per revolution while maintaining all other electrical and mechanical parameters identical to the 62F22-02-P. This substitute is applicable in applications where lower pulse resolution is acceptable or preferred. The 62N30-P shares the same 5V supply voltage, 1/4" flatted end actuator, vertical mounting orientation, PC pin termination, and 1M cycle rotational life. ROHS3 compliance and MSL 1 rating are maintained.

Compliance and Certification Basis

All substitute parts maintain ROHS3 compliance, REACH unaffected status, and MSL 1 (unlimited) moisture sensitivity rating. Selection between the main part and substitutes is based on pulse resolution requirements and series availability within the specified electrical and mechanical constraints.

Frequently Asked Questions (FAQ)

Q: Can the 62S22-M5-P replace the 62F22-02-P in existing designs?

A: Yes. The 62S22-M5-P is electrically and mechanically equivalent to the 62F22-02-P. Both deliver 16 PPR quadrature output at 5V supply with identical actuator geometry, mounting configuration, and rotational life specifications. No design modification is required.

Q: What is the primary difference between the 62F22-02-P and 62N30-P?

A: The 62N30-P operates at 12 pulses per revolution, compared to 16 PPR for the 62F22-02-P. All other parameters—supply voltage, actuator type, mounting method, detent function, built-in switch, and rotational life—remain identical. Selection depends on application pulse resolution requirements.

Q: Are all substitute parts available in the same packaging?

A: All listed parts are supplied in Bulk packaging. Inventory availability varies: 62F22-02-P (745 pcs), 62S22-M5-P (1309 pcs), and 62N30-P (755 pcs) are currently in stock.

Q: Do the substitute parts maintain the same compliance certifications?

A: Yes. All parts listed—62F22-02-P, 62S22-M5-P, and 62N30-P—are ROHS3 compliant, REACH unaffected, and carry MSL 1 (unlimited) moisture sensitivity rating.

Q: What determines whether a part qualifies as a substitute?

A: Substitutes must match all mandatory parameters: optical encoder type, quadrature incremental output, 5V supply voltage, 1/4" flatted end actuator, detent mechanism, built-in switch, PCB through-hole vertical mounting, PC pin termination, 1M cycle rotational life, and ROHS3/MSL 1 compliance. Pulse per revolution specification may vary between substitute options.

Q: Can I use the 62N30-P (12 PPR) in an application designed for 16 PPR?

A: The 62N30-P is mechanically and electrically compatible with the 62F22-02-P mounting and interface. However, the 12 PPR output differs from the 16 PPR specification. Application compatibility depends on whether the system firmware or signal processing can accommodate the lower pulse resolution. Verify application requirements before substitution.