TE Connectivity 5917738-1 D-Sub Receptacle Connector: Equivalent & Substitute Parts

Part Overview

The TE Connectivity 5917738-1 is a 14-position D-Sub receptacle connector featuring right-angle solder termination and panel mount through-hole installation. This connector is classified as obsolete, necessitating identification of active equivalent and substitute parts for ongoing design and procurement requirements. The CHAMP .050 II series connector provides board lock functionality with gold-plated contacts suitable for applications requiring reliable D-shaped connector interfaces.

Substiute Parts

5917738-1

TE Connectivity AMP ConnectorsIn Stock: 11735917738-1 Datasheet

Current PartRFQ

2-5178238-1

TE Connectivity AMP ConnectorsIn Stock: 16792-5178238-1 Datasheet

DirectRFQ

DX10G1M-14SE(50)

Hirose Electric Co LtdIn Stock: 928DX10G1M-14SE(50) Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete TE Connectivity 5917738-1 is determined by strict alignment of the following critical parameters:

Mandatory Matching Parameters:

• Connector Type: Receptacle
• Number of Positions: 14
• Number of Rows: 2
• Mounting Type: Panel Mount, Through Hole, Right Angle
• Termination Method: Solder
• Connector Style: Outer Shroud Contacts
• Flange Feature: Housing/Shell (M2.6)
• Contact Finish: Gold
• Features: Board Lock
• Moisture Sensitivity Level: 1 (Unlimited)

Substitution Categories:

Direct Equivalent: TE Connectivity 2-5178238-1 maintains identical electrical and mechanical specifications to the main part. This connector is active and available in higher inventory quantities, serving as the primary direct replacement.

Similar Substitute: Hirose Electric DX10G1M-14SE(50) provides functional equivalence with identical position count, mounting configuration, and termination method. This connector is classified as Miniature High Density (HD) type, representing a design variant within the same functional category. Compatibility is established through matching core parameters while accommodating the HD form factor designation.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection: TE Connectivity 2-5178238-1

The TE Connectivity 2-5178238-1 is the recommended direct equivalent for applications currently specified with the obsolete 5917738-1. This connector maintains identical electrical and mechanical parameters, including 14-position configuration, right-angle solder termination, and panel mount through-hole installation. The part is active with established supply availability (1605 units in stock) and carries RoHS compliance certification. The contact finish thickness specification (30.0µin / 0.76µm) exceeds the original part specification, providing enhanced durability. This connector is suitable for direct substitution without design modification.

Secondary Selection: Hirose DX10G1M-14SE(50)

The Hirose DX10G1M-14SE(50) serves as a functional equivalent for applications where Miniature High Density connector form factors are acceptable. This connector matches all critical electrical and mechanical parameters while offering an alternative manufacturer source. The part is active and ROHS3 compliant. Selection of this connector requires confirmation that the HD form factor and Hirose connector series are compatible with existing mating connectors and mechanical interfaces in the application.

Compliance Considerations:

Both substitute parts maintain RoHS compliance status and MSL 1 (Unlimited) moisture sensitivity rating, ensuring compatibility with standard manufacturing and storage environments. The ECCN classification (EAR99) and HTSUS code (8536.69.4040) remain consistent across all three connectors, supporting regulatory and trade compliance requirements.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 2-5178238-1 be used as a direct replacement for the 5917738-1?

A: Yes. The 2-5178238-1 maintains identical specifications for connector type, position count, mounting configuration, termination method, and contact finish. Both connectors are from the CHAMP .050 II series with board lock functionality. The primary difference is product status (active versus obsolete) and packaging format (tray versus original packaging).

Q: What is the difference between the TE Connectivity 2-5178238-1 and the Hirose DX10G1M-14SE(50)?

A: Both connectors provide 14-position receptacle functionality with right-angle solder termination and panel mount installation. The primary differences are manufacturer (TE Connectivity versus Hirose), connector series (CHAMP .050 II versus DXM), and connector classification (standard D-Sub versus Miniature High Density). The Hirose connector represents a design variant suitable for applications where HD form factors are specified or preferred.

Q: Are there packaging differences between the substitute parts?

A: The TE Connectivity 5917738-1 original packaging format is not specified in available data. The TE Connectivity 2-5178238-1 is supplied in tray packaging. The Hirose DX10G1M-14SE(50) is also supplied in tray packaging. Tray packaging is standard for high-volume connector applications and does not affect connector functionality or performance.

Q: Do the substitute connectors have the same contact finish specifications?

A: Both substitute connectors feature gold contact finish. The TE Connectivity 2-5178238-1 specifies 30.0µin (0.76µm) contact finish thickness, which exceeds the original 5917738-1 specification of 3.94µin (0.10µm). The Hirose DX10G1M-14SE(50) contact finish thickness is not specified in available data. Gold plating thickness variations within industry standards do not affect electrical performance or connector reliability.

Q: Are both substitute parts RoHS compliant?

A: Yes. The TE Connectivity 2-5178238-1 carries RoHS compliance certification. The Hirose DX10G1M-14SE(50) carries ROHS3 compliance certification. Both certifications satisfy RoHS regulatory requirements for electronic components.

Q: What is the moisture sensitivity level for the substitute connectors?

A: Both substitute connectors carry MSL 1 (Unlimited) rating, identical to the original 5917738-1. This rating indicates unlimited shelf life under standard storage conditions without desiccant requirements.

Q: Can the Hirose connector be used in applications designed for TE Connectivity connectors?

A: The Hirose DX10G1M-14SE(50) provides functional equivalence in terms of electrical and mechanical specifications. However, mating connector compatibility must be confirmed. The Hirose connector is designed to mate with Hirose DXM series plugs. If the application uses TE Connectivity CHAMP .050 II series plugs, the Hirose receptacle will not be compatible. Connector mating interface specifications must be verified before selection.

Q: What inventory levels are available for the substitute parts?

A: The TE Connectivity 2-5178238-1 has 1605 units in stock. The Hirose DX10G1M-14SE(50) has 822 units in stock. Both parts are available for immediate procurement.