APEM 5636ADB Toggle Switch SPDT Equivalent & Substitute Parts

Part Overview

The APEM 5636ADB is an SPDT (Single Pole Double Throw) toggle switch rated for 6A at 125V AC and 4A at 30V DC. This panel-mount switch features a standard round actuator with solder lug termination and is designed for On-On switching applications. The part is currently active in production with 940 units in stock inventory.

Substitute parts are identified when equivalent electrical ratings, mechanical compatibility, and functional characteristics align within acceptable operational parameters. The following parts meet the core substitution criteria for this switch category.

Substiute Parts

5636ADB

APEM Inc.In Stock: 10135636ADB Datasheet

Current PartRFQ

100SP1T1B1M1REH

E-SwitchIn Stock: 3016100SP1T1B1M1REH Datasheet

SimilarRFQ

7101SYZGE

C&KIn Stock: 13787101SYZGE Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for SPDT toggle switches is determined by the following criteria:

Mandatory Compatibility Parameters:

• Circuit configuration must be SPDT
• Switch function must be On-On
• Mounting type must be Panel Mount
• Termination style must be Solder Lug
• Bushing thread must be 1/4-40
• Panel cutout diameter must accommodate the main part (6.50mm reference)

Electrical Compatibility Parameters:

• Current rating must meet or exceed the application requirement
• Voltage rating (both AC and DC) must meet or exceed the application requirement
• Operating temperature range must encompass the application environment

Mechanical Compatibility Parameters:

• Actuator type must be Standard Round
• Physical dimensions must allow panel mounting without modification

The identified substitute parts meet these core criteria while maintaining functional equivalence for SPDT switching applications.

Parameter Comparison

Engineering Selection Recommendations

APEM 5636ADB (Primary Part) All three parts are active products with ROHS3 compliance. The APEM 5636ADB provides the highest current capacity (6A AC) and voltage rating (125V AC), making it suitable for general-purpose industrial switching applications.

C&K 7101SYZGE (Preferred Substitute) The C&K 7101SYZGE matches the APEM part in current rating (5A) and AC voltage rating (120V), with superior electrical life (100,000 cycles versus 50,000 cycles). This part is suitable for applications requiring extended operational life. REACH status is affected; compliance verification is required for regulated markets.

E-Switch 100SP1T1B1M1REH (Limited Substitution) The E-Switch 100SP1T1B1M1REH has significantly reduced current capacity (0.4VA) and voltage ratings (20V AC/DC). This part is suitable only for low-power switching applications and is not recommended as a general substitute for the APEM 5636ADB in standard industrial applications.

Frequently Asked Questions (FAQ)

Q: Can the E-Switch 100SP1T1B1M1REH replace the APEM 5636ADB in my application? A: Only if your application requires switching at 0.4VA or less and operates at 20V or below. The E-Switch part has significantly lower electrical ratings and is not suitable for applications requiring 6A at 125V.

Q: What is the primary difference between the C&K 7101SYZGE and the APEM 5636ADB? A: The C&K part has a slightly lower AC voltage rating (120V versus 125V) and lower current capacity (5A versus 6A), but offers superior electrical life (100,000 cycles versus 50,000 cycles). Both parts are mechanically compatible with 1/4-40 bushing threads and 6.35mm panel cutouts.

Q: Are all three parts mechanically interchangeable? A: The panel cutout diameters differ slightly (APEM 6.50mm versus E-Switch and C&K 6.35mm). Verify panel hole dimensions before substitution. All three parts use identical 1/4-40 bushing threads and standard round actuators.

Q: What compliance certifications apply to these parts? A: All three parts are ROHS3 compliant and REACH unaffected, except the C&K 7101SYZGE which has REACH affected status. Verify REACH compliance requirements for your specific market or application.

Q: Which substitute part has the longest operational life? A: The C&K 7101SYZGE is rated for 100,000 electrical cycles, compared to 50,000 cycles for the APEM 5636ADB and 40,000 cycles for the E-Switch part.

Q: Can I use these parts in applications below -30°C? A: The APEM 5636ADB operates to -40°C, while both substitute parts operate to -30°C minimum. For applications below -30°C, the APEM part is required.