TE Connectivity AMP Connectors 552560-1 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 552560-1 is a 50 Position One Piece Backshell Connector with 90° cable exit, manufactured from Polyphenylene Oxide (PPO) material in black. This connector belongs to the CHAMP series and features a screw lock 4-40 hardware configuration with unshielded design for round cable applications.

The original part 552560-1 carries an obsolete product status. Identifying equivalent and substitute parts is necessary to ensure continued availability, maintain design compatibility, and access components with current manufacturing support and compliance certifications.

Substiute Parts

552560-1

TE Connectivity AMP ConnectorsIn Stock: 1090552560-1 Datasheet

Current PartRFQ

5552560-1

TE Connectivity AMP ConnectorsIn Stock: 57615552560-1 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 552560-1 is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part must maintain identical specifications for:

• Position Count: 50 positions
• Cable Exit Configuration: 90° angle
• Shielding Type: Unshielded
• Material Composition: Polyphenylene Oxide (PPO)
• Cable Accommodation: Round cable type
• Fastening System: Cable clamp with screw lock 4-40
• Color: Black
• Form Factor: One piece backshell design
• Series Classification: CHAMP series

The substitute part 5552560-1 meets all these criteria and is therefore classified as a direct equivalent. The primary distinction between the original and substitute lies in product status and compliance certifications rather than functional or mechanical characteristics.

Parameter Comparison

Engineering Selection Recommendations

The substitute part 5552560-1 is the direct equivalent for the obsolete 552560-1. Selection of the substitute is supported by the following engineering considerations:

Functional Equivalence: Both parts are identical in all electrical and mechanical specifications, including position count, cable exit angle, material composition, and hardware configuration. No design modifications are required for direct substitution.

Product Status: The substitute part 5552560-1 carries an active product status, ensuring ongoing manufacturing support, availability, and supply chain continuity. The original part 552560-1 is obsolete and subject to discontinuation.

Compliance Certifications: The substitute part 5552560-1 is RoHS Compliant with Moisture Sensitivity Level 1 (Unlimited), providing enhanced environmental and regulatory compliance compared to the original part. Both parts share identical ECCN and HTSUS classifications.

Packaging: The substitute part is supplied in box packaging, which may differ from the original part's packaging specification. This distinction does not affect functional compatibility or performance.

For new designs, procurement activities, or component replacement in existing systems, the substitute part 5552560-1 is the appropriate selection.

Frequently Asked Questions (FAQ)

Q: Can 5552560-1 be used as a direct replacement for 552560-1?

A: Yes. The parts are functionally and mechanically identical across all critical parameters including position count, cable exit angle, material, shielding, and hardware configuration. No design changes are required.

Q: What is the primary difference between 552560-1 and 5552560-1?

A: The primary differences are product status and compliance certifications. The substitute 5552560-1 is active with RoHS compliance and MSL 1 rating, while the original 552560-1 is obsolete with no RoHS applicability statement.

Q: Does the packaging difference affect compatibility?

A: No. The packaging difference (box for 5552560-1 versus unspecified for 552560-1) does not affect the connector's electrical or mechanical performance. Packaging is a logistics consideration only.

Q: Are both parts suitable for round cable applications?

A: Yes. Both 552560-1 and 5552560-1 are specified for round cable type with 90° cable exit configuration.

Q: What is the significance of RoHS compliance on the substitute part?

A: RoHS compliance on 5552560-1 indicates conformance to Restriction of Hazardous Substances regulations, providing assurance for applications subject to environmental and regulatory requirements. The original part carries no RoHS applicability statement.

Q: Is the screw lock 4-40 hardware identical on both parts?

A: Yes. Both parts feature identical cable clamp hardware with screw lock 4-40 configuration.

Q: Can these parts be intermixed in existing assemblies?

A: Yes. The parts are fully interchangeable from a functional and mechanical standpoint. Existing assemblies using 552560-1 can incorporate 5552560-1 without modification.