APEM 5236ADB Toggle Switch SPDT Equivalent & Substitute Parts

Part Overview

The APEM 5236ADB is an active-status toggle switch with SPDT (Single Pole Double Throw) circuit configuration, rated for 6A AC at 125V and 4A DC at 30V. This panel-mount component features a standard round actuator with PC pin termination and epoxy-sealed terminals for enhanced durability. The part is ROHS3 compliant and maintains an operating temperature range of -40°C to 85°C with 50,000 electrical cycles. Equivalent and substitute parts are identified based on matching circuit topology, mounting configuration, termination style, and mechanical compatibility within acceptable electrical parameter ranges.

Substiute Parts

5236ADB

APEM Inc.In Stock: 9815236ADB Datasheet

Current PartRFQ

100SP1T1B1M2REH

E-SwitchIn Stock: 1284100SP1T1B1M2REH Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the APEM 5236ADB are identified based on the following critical parameters that determine functional compatibility:

Primary Matching Criteria:

• Circuit configuration: SPDT topology required
• Switch function: On-On operation
• Mounting type: Panel mount with compatible mechanical interface
• Termination style: PC pin configuration
• Panel cutout dimensions: Circular aperture compatible with 6.35mm to 6.50mm diameter range
• Bushing thread: 1/4-40 standard

Electrical Parameter Tolerance: Substitute parts must operate within the voltage and current envelope of the application. The APEM 5236ADB operates at 6A AC / 125V AC and 4A DC / 30V DC. Substitute parts with lower ratings require application-level verification of actual load requirements. Parts with equal or higher ratings provide direct substitution capability.

Environmental and Compliance Alignment: All identified substitutes maintain ROHS3 compliance, MSL Level 1 (unlimited moisture sensitivity), and REACH unaffected status, ensuring regulatory consistency.

Parameter Comparison

Engineering Selection Recommendations

APEM 5236ADB Primary Selection: The APEM 5236ADB remains the primary component for applications requiring 6A AC at 125V or 4A DC at 30V. Active product status and full electrical specification compliance support direct use in new designs and existing production environments.

E-Switch 100SP1T1B1M2REH Substitution Constraints: The E-Switch 100SP1T1B1M2REH shares identical circuit topology, mounting configuration, and termination style. However, electrical ratings are significantly reduced (0.4VA AC/DC at 20V maximum). This substitute is suitable only for applications where actual load current does not exceed 0.4A and voltage does not exceed 20V. The lower operating temperature minimum (-30°C versus -40°C) and reduced electrical life (40,000 versus 50,000 cycles) represent additional design constraints.

Compliance Alignment: Both parts maintain ROHS3 compliance, MSL Level 1 rating, and REACH unaffected status, ensuring regulatory consistency in component selection.

Frequently Asked Questions (FAQ)

Q: Can the E-Switch 100SP1T1B1M2REH directly replace the APEM 5236ADB in all applications?

A: No. While both parts share SPDT circuit configuration, panel-mount topology, and PC pin termination, the E-Switch part has significantly lower electrical ratings (0.4VA at 20V maximum versus 6A at 125V AC). Direct substitution is limited to applications where actual load requirements do not exceed the E-Switch electrical envelope.

Q: What are the mechanical compatibility considerations between these parts?

A: Both parts feature standard round actuators with 1/4-40 bushing threads and circular panel cutouts. The APEM part requires a 6.50mm diameter cutout, while the E-Switch part requires 6.35mm. Actuator lengths are nearly identical (10.50mm versus 10.41mm), ensuring functional compatibility in panel-mount installations.

Q: Are there temperature range differences that affect substitution?

A: Yes. The APEM 5236ADB operates from -40°C to 85°C, while the E-Switch 100SP1T1B1M2REH operates from -30°C to 85°C. Applications requiring operation below -30°C require the APEM part.

Q: How do electrical life ratings compare?

A: The APEM 5236ADB provides 50,000 electrical cycles, while the E-Switch 100SP1T1B1M2REH provides 40,000 cycles. High-cycle applications should prioritize the APEM part.

Q: What packaging and inventory considerations apply?

A: The APEM 5236ADB is available in bulk packaging with 872 pieces in stock. The E-Switch 100SP1T1B1M2REH is available in bulk packaging with 1,254 pieces in stock. Both parts maintain active product status.