TE Connectivity 5-147424-7 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 5-147424-7 is a 14-position receptacle connector from the AMPMODU Mod IV series, designed for board-to-board or cable applications with 0.100" (2.54mm) pitch spacing. This through-hole connector features gold-plated mating contacts, solder termination, and push-pull fastening. The part is active in production with 980 units currently in stock.

Substitute parts are necessary when the original part becomes unavailable, when alternative contact finishes or connector types better suit specific application requirements, or when sourcing from multiple manufacturers is required for supply chain resilience.

Substiute Parts

5-147424-7

TE Connectivity AMP ConnectorsIn Stock: 9945-147424-7 Datasheet

Current PartRFQ

0901512114

MolexIn Stock: 30650901512114 Datasheet

SimilarRFQ

M20-7830746

Harwin Inc.In Stock: 1505M20-7830746 Datasheet

SimilarRFQ

PPPC072LFBN-RC

Sullins Connector SolutionsIn Stock: 6772PPPC072LFBN-RC Datasheet

SimilarRFQ

PPTC072LFBN-RC

Sullins Connector SolutionsIn Stock: 8326PPTC072LFBN-RC Datasheet

SimilarRFQ

SSQ-107-01-F-D

Samtec Inc.In Stock: 1137SSQ-107-01-F-D Datasheet

SimilarRFQ

SSQ-107-01-L-D

Samtec Inc.In Stock: 1194SSQ-107-01-L-D Datasheet

SimilarRFQ

SSQ-107-01-SM-D

Samtec Inc.In Stock: 872SSQ-107-01-SM-D Datasheet

SimilarRFQ

SSW-107-01-F-D

Samtec Inc.In Stock: 1466SSW-107-01-F-D Datasheet

SimilarRFQ

SSW-107-01-F-D-LL

Samtec Inc.In Stock: 867SSW-107-01-F-D-LL Datasheet

SimilarRFQ

SSW-107-01-L-D

Samtec Inc.In Stock: 3107SSW-107-01-L-D Datasheet

SimilarRFQ

SSW-107-01-S-D-LL

Samtec Inc.In Stock: 1835SSW-107-01-S-D-LL Datasheet

SimilarRFQ

SSW-107-02-F-D

Samtec Inc.In Stock: 918SSW-107-02-F-D Datasheet

SimilarRFQ

SSW-107-21-G-D

Samtec Inc.In Stock: 1274SSW-107-21-G-D Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity 5-147424-7 is determined by the following critical parameters:

Core Compatibility Parameters:

• 14 positions with 0.100" (2.54mm) pitch spacing
• 2-row configuration with 0.100" (2.54mm) row spacing
• Through-hole solder termination
• Push-pull fastening mechanism
• Receptacle connector type
• Square contact shape
• Phosphor bronze contact material

Variable Parameters Affecting Substitution:

• Contact finish (gold or tin)
• Contact finish thickness
• Connector subtype (receptacle vs. header)
• Contact type (female socket vs. forked)
• Insulation material composition
• Operating temperature range
• Current rating capacity
• Voltage rating

Substitute parts listed below maintain the core compatibility parameters while offering variations in contact finish, connector configuration, and electrical ratings. All substitute parts are active products with RoHS3 compliance or RoHS compliance status.

Parameter Comparison

Engineering Selection Recommendations

Direct Receptacle Substitutes (Same Connector Type):

The Molex 0901512114 and Harwin M20-7830746 are direct receptacle substitutes with identical 14-position, 0.100" pitch configuration. Both are active products with full RoHS3 compliance. The Molex part features tin contact finish with 40.0µin thickness and supports 3A current rating across -55°C to 105°C. The Harwin part also uses tin finish and supports 3A current with extended voltage rating to 1000V, operating across -40°C to 105°C. Both maintain UL94 V-0 flammability rating and phosphor bronze contacts.

Gold-Plated Receptacle Alternatives (Samtec SSW Series):

The Samtec SSW-107-01-F-D and SSW-107-01-L-D receptacles provide gold-plated mating contacts matching the original TE part's finish specification. Both support 4.7A per contact, exceeding the original 2A rating, and operate across the extended -55°C to 125°C temperature range. These parts feature liquid crystal polymer insulation and are ROHS3 compliant. The SSW-107-01-L-D maintains 10.0µin gold thickness consistent with the TE part specification.

Header Connector Alternatives (Sullins Series):

The Sullins PPPC072LFBN-RC and PPTC072LFBN-RC are header connectors rather than receptacles, offering board-to-board mounting with identical 14-position, 0.100" pitch spacing. Both support 3A current and 250V voltage rating with UL94 V-0 flammability. The PPPC072LFBN-RC features gold plating while the PPTC072LFBN-RC uses tin finish. These parts are ROHS3 compliant and available in high inventory quantities.

Temperature Range Considerations:

The original TE 5-147424-7 operates across -65°C to 125°C. The Samtec SSW series maintains this full temperature range. Molex and Harwin substitutes operate to -55°C minimum and 105°C maximum, representing a narrower range suitable for applications not requiring the extended low-temperature specification.

Current and Voltage Ratings:

Samtec SSW receptacles provide 4.7A per contact capacity, exceeding the original 2A specification. Molex and Harwin alternatives support 3A. Harwin offers the highest voltage rating at 1000V, while Molex provides 350V and Sullins headers provide 250V.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0901512114 directly replace the TE Connectivity 5-147424-7?

A: The Molex 0901512114 is mechanically and electrically compatible as a direct receptacle substitute. Both share identical 14-position, 0.100" pitch configuration, through-hole solder termination, and push-pull fastening. The primary difference is contact finish: Molex uses tin while TE uses gold. Molex supports 3A current versus TE's 2A, and operates across -55°C to 105°C versus TE's -65°C to 125°C. Compatibility depends on application requirements for contact finish, temperature range, and current capacity.

Q: What is the difference between receptacle and header connectors in this product category?

A: Receptacle connectors feature female socket contacts and are designed to receive mating pins from a complementary connector. Header connectors feature male pin contacts and are designed to mate with receptacle connectors. The Sullins PPPC072LFBN-RC and PPTC072LFBN-RC are headers, while the TE, Molex, Harwin, and Samtec parts are receptacles. Selection depends on the mating connector type required in the application.

Q: Why do some substitute parts have higher current ratings than the original?

A: Current rating capacity is determined by contact material, contact geometry, and contact finish thickness. The Samtec SSW series supports 4.7A per contact due to optimized contact design and material composition. Higher current capacity does not require substitution but provides design margin for applications with elevated current demands. The original 2A specification remains valid for the TE part's intended applications.

Q: Are all substitute parts RoHS compliant?

A: Yes. The original TE 5-147424-7 is RoHS Compliant. All listed substitute parts are either RoHS Compliant or ROHS3 Compliant, meeting current regulatory requirements for hazardous substance restrictions.

Q: What is the significance of contact finish thickness specifications?

A: Contact finish thickness affects durability, corrosion resistance, and mating cycle life. The TE part specifies 10.0µin (0.25µm) gold thickness on mating contacts. Samtec SSW-107-01-L-D matches this specification at 10.0µin. Molex provides 40.0µin tin thickness, offering different corrosion characteristics. Sullins PPPC072LFBN-RC specifies flash gold finish. Selection depends on environmental exposure and mating cycle requirements.

Q: Can I use a substitute part with a different operating temperature range?

A: Operating temperature range substitution depends on application requirements. The original TE part operates -65°C to 125°C. Molex and Harwin alternatives operate -55°C to 105°C, representing a narrower range. If the application requires operation below -55°C or above 105°C, these substitutes are not suitable. Samtec SSW series maintains the full -55°C to 125°C range, providing compatibility for extended low-temperature applications.

Q: What packaging formats are available for these substitute parts?

A: The TE original part is supplied in tube packaging. Substitute parts are available in multiple formats: Molex and Harwin in tube, Sullins in tray, and Samtec in bulk. Packaging format affects handling, storage, and automated assembly compatibility. Verify packaging requirements with assembly equipment specifications before substitution.

Q: Are the Samtec SSQ series parts suitable substitutes?

A: The Samtec SSQ-107-01-F-D, SSQ-107-01-L-D, and SSQ-107-01-SM-D are receptacle connectors with identical 14-position, 0.100" pitch configuration. These parts feature forked contact type rather than female socket contacts, and use liquid crystal polymer insulation. While mechanically compatible in pitch and position count, the forked contact design represents a different contact interface. Compatibility depends on mating connector design and contact engagement requirements.

Q: What is the difference between SSW-107-01-F-D and SSW-107-01-L-D?

A: Both are Samtec SSW series receptacles with identical mechanical and electrical specifications. The primary difference is contact finish thickness: SSW-107-01-F-D specifies 3.00µin (0.076µm) gold thickness, while SSW-107-01-L-D specifies 10.0µin (0.25µm) gold thickness. The higher thickness in SSW-107-01-L-D provides enhanced durability and corrosion resistance, matching the TE original specification.

Q: Can I mix substitute parts from different manufacturers in the same assembly?

A: All listed substitute parts maintain identical 14-position, 0.100" pitch spacing and are mechanically interchangeable. However, mixing different manufacturers' parts in the same assembly may introduce variations in insulation height, contact length, and contact finish characteristics. For consistent performance and reliability, maintain single-manufacturer sourcing within an assembly or verify dimensional compatibility through detailed specification review.