4MA200000Z3BACTGI Equivalent & Substitute Parts

Part Overview

The 4MA200000Z3BACTGI is a 200 MHz MEMS-based XO (Standard) oscillator manufactured by Renesas Electronics Corporation, featuring LVPECL output and 2.5V supply voltage with Enable/Disable functionality. This component is classified as Obsolete, making identification of suitable substitute parts essential for ongoing system support and new design implementations. The MEMS resonator technology provides the frequency reference for this oscillator in a compact 6-SMD, No Lead surface mount package.

Substiute Parts

4MA200000Z3BACTGI

Renesas Electronics CorporationIn Stock: 10144MA200000Z3BACTGI Datasheet

Current PartRFQ

XLP525200.000000I

Renesas Electronics CorporationIn Stock: 824XLP525200.000000I Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 4MA200000Z3BACTGI is determined by strict equivalence across the following critical parameters:

• Frequency: 200 MHz (exact match required)
• Output Type: LVPECL (exact match required)
• Supply Voltage: 2.5V (exact match required)
• Function: Enable/Disable capability (exact match required)
• Frequency Stability: ±50ppm (exact match required)
• Operating Temperature Range: -40°C ~ 85°C (exact match required)
• Package / Case: 6-SMD, No Lead (exact match required)
• Mounting Type: Surface Mount (exact match required)

The XLP525200.000000I qualifies as a direct substitute based on matching all critical electrical and mechanical parameters. While the base resonator differs (Crystal vs. MEMS), both technologies deliver identical functional performance within the specified parameter envelope. The substitute part is manufactured by the same supplier (Renesas Electronics Corporation) and maintains Active product status, ensuring long-term availability and support.

Parameter Comparison

Engineering Selection Recommendations

The XLP525200.000000I is the qualified substitute for the 4MA200000Z3BACTGI based on the following engineering criteria:

Product Status: The substitute part maintains Active status with Renesas Electronics Corporation, ensuring continued availability, technical support, and supply chain stability. The original part's Obsolete classification necessitates transition to an alternative.

Compliance & Certifications: The XLP525200.000000I carries ROHS3 Compliant and REACH Unaffected designations, meeting current regulatory requirements for electronic component procurement. Both parts share identical ECCN (EAR99) and HTSUS (8542.39.0001) classifications.

Electrical Equivalence: All critical electrical parameters—frequency, output type, supply voltage, function, frequency stability, and operating temperature range—are identical between the main part and substitute. The substitute's lower maximum supply current (41mA vs. 95mA) represents a favorable characteristic for power budget optimization.

Mechanical Compatibility: Dimensional variance is minimal and within acceptable tolerances for PCB layout. The substitute's slightly increased height (1.40mm vs. 0.90mm) requires verification against board clearance constraints, though the difference is negligible for most applications.

Moisture Handling: The substitute's MSL rating of 1 (Unlimited) provides superior moisture protection compared to the original part's MSL 3 (168 Hours), reducing handling and storage complexity.

Frequently Asked Questions (FAQ)

Q: Can the XLP525200.000000I be used as a direct replacement for the 4MA200000Z3BACTGI without circuit modifications?

A: Yes. Both parts deliver identical electrical performance across all critical parameters: 200 MHz frequency, LVPECL output, 2.5V supply, Enable/Disable function, ±50ppm stability, and -40°C to 85°C operating range. No circuit modifications are required. Verify PCB clearance for the substitute's 1.40mm seated height.

Q: What is the difference between MEMS and Crystal resonator technology in this application?

A: The 4MA200000Z3BACTGI uses MEMS (Micro-Electro-Mechanical Systems) resonator technology, while the XLP525200.000000I uses Crystal resonator technology. Both deliver identical frequency stability (±50ppm) and functional performance within this product category. The substitution is valid based on electrical and mechanical parameter equivalence.

Q: Are there any supply chain or availability advantages to using the substitute part?

A: Yes. The XLP525200.000000I maintains Active product status with Renesas Electronics Corporation, ensuring ongoing availability and technical support. The original 4MA200000Z3BACTGI is classified as Obsolete, making the substitute the recommended choice for new designs and ongoing system support.

Q: Does the substitute part meet current regulatory compliance standards?

A: Yes. The XLP525200.000000I is ROHS3 Compliant and REACH Unaffected. Both parts share identical ECCN and HTSUS classifications, maintaining regulatory equivalence for procurement and export purposes.

Q: What is the significance of the MSL rating difference between the two parts?

A: The substitute's MSL 1 (Unlimited) rating provides superior moisture protection compared to the original part's MSL 3 (168 Hours). This reduces handling, storage, and baking requirements, simplifying supply chain management and reducing component preparation time.

Q: Are there any dimensional constraints I should consider when substituting these parts?

A: The substitute is slightly larger: 5.15mm x 3.35mm (vs. 5.00mm x 3.20mm) and taller: 1.40mm (vs. 0.90mm). Verify that your PCB layout accommodates these minimal dimensional differences, particularly regarding component clearance and board-level routing constraints.

Q: What is the power consumption difference between these parts?

A: The substitute's maximum supply current is 41mA compared to the original part's 95mA (Typ). This lower power consumption may provide benefits for power budget optimization in your application.