TE Connectivity AMP Connectors 499997-8 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 499997-8 is a 34 Position Rectangular Receptacle Connector designed for IDC (Insulation Displacement Contact) termination with ribbon cable in the 26-28 AWG wire gauge range. This connector features gold-plated forked contacts and operates in the AMP-Latch series with a 0.100" (2.54mm) pitch configuration across two rows.

The 499997-8 is classified as obsolete. Identifying equivalent and substitute parts is necessary to maintain design compatibility, ensure continued component availability, and support ongoing production and field service requirements for systems utilizing this connector specification.

Substiute Parts

499997-8

TE Connectivity AMP ConnectorsIn Stock: 852499997-8 Datasheet

Current PartRFQ

1658620-8

TE Connectivity AMP ConnectorsIn Stock: 23461658620-8 Datasheet

DirectRFQ

89134-0001HA

3MIn Stock: 112889134-0001HA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 499997-8 are identified based on strict electrical and mechanical parameter alignment. The following parameters determine substitution eligibility:

Critical Matching Parameters:

• Connector Type: Receptacle
• Number of Positions: 34
• Pitch: 0.100" (2.54mm)
• Number of Rows: 2
• Row Spacing: 0.100" (2.54mm)
• Cable Termination: IDC
• Wire Gauge: 26-28 AWG
• Wire Type: Ribbon Cable
• Mounting Type: Free Hanging (In-Line)
• Features: Feed Through
• Moisture Sensitivity Level: 1 (Unlimited)

All identified substitute parts meet these critical parameters. Variations in contact type, contact finish thickness, color, and product status are noted but do not preclude functional substitution within the specified electrical and mechanical constraints.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: TE Connectivity AMP Connectors 1658620-8

The 1658620-8 is the direct substitute for the obsolete 499997-8. Both parts are manufactured by TE Connectivity AMP Connectors within the same AMP-Latch series. The 1658620-8 maintains identical electrical and mechanical specifications, including pitch, row configuration, contact gauge, and termination method. The 1658620-8 carries Active product status and ROHS3 compliance, providing long-term availability and regulatory alignment for new designs and production continuity.

Secondary Substitute: 3M 89134-0001HA

The 89134-0001HA is a cross-manufacturer equivalent from 3M within the 891 series. This part meets all critical electrical and mechanical parameters for functional substitution. The 89134-0001HA features increased contact finish thickness (30.0µin versus 15.0µin) and differs in contact type designation (Female Socket versus Forked) and housing color (Gray versus Black). The 89134-0001HA is Active and ROHS3 compliant. Selection of this part requires confirmation that the increased contact finish thickness and contact geometry are compatible with mating connector specifications.

Both substitute parts are ROHS3 compliant and carry Active product status, ensuring regulatory compliance and ongoing component availability compared to the obsolete 499997-8.

Frequently Asked Questions (FAQ)

Q: Can the 1658620-8 directly replace the 499997-8 in existing designs?

A: Yes. The 1658620-8 maintains identical specifications for connector type, position count, pitch, row configuration, cable termination method, wire gauge, and mounting type. Both parts are gold-plated receptacles with feed-through capability designed for 26-28 AWG ribbon cable IDC termination.

Q: What is the primary advantage of using 1658620-8 over the obsolete 499997-8?

A: The 1658620-8 is Active product status with ROHS3 compliance, ensuring long-term availability and regulatory alignment. The 499997-8 is obsolete and RoHS non-compliant.

Q: How does the 89134-0001HA differ from the 499997-8?

A: The 89134-0001HA is manufactured by 3M rather than TE Connectivity and belongs to the 891 series. It features increased contact finish thickness (30.0µin versus 15.0µm), different contact type designation (Female Socket versus Forked), and gray housing instead of black. All critical electrical and mechanical parameters remain identical.

Q: Is the increased contact finish thickness of the 89134-0001HA a concern?

A: The increased contact finish thickness (30.0µin on 89134-0001HA versus 15.0µin on 499997-8) does not affect IDC termination compatibility. Confirmation with mating connector specifications is required to ensure contact engagement characteristics remain within acceptable tolerances.

Q: What packaging formats are available for substitute parts?

A: The 1658620-8 is supplied in Tube packaging. The 89134-0001HA is supplied in Bulk packaging. The original 499997-8 packaging format is not specified in available documentation.

Q: Are both substitute parts ROHS3 compliant?

A: Yes. Both the 1658620-8 and 89134-0001HA carry ROHS3 compliance certification, meeting current regulatory requirements for electronic component manufacturing and distribution.

Q: Can the 89134-0001HA be used in applications requiring specific color coding?

A: The 89134-0001HA housing is gray, while the 499997-8 is black. If color coding is a functional requirement for system identification or assembly procedures, this difference must be evaluated against application specifications.

Q: What is the inventory status for substitute parts?

A: The 1658620-8 has 2298 pieces in stock. The 89134-0001HA has 1032 pieces in stock. Both parts are available as new original components.