TE Connectivity 414217-1 BNC Connector: Equivalent & Substitute Parts

Part Overview

The TE Connectivity 414217-1 is a BNC connector jack (female socket) rated for 75 ohms impedance, designed for panel mount applications with solder cup termination. This component is classified as a coaxial RF connector and operates across a frequency range up to 2 GHz with a maximum voltage rating of 500 V.

The 414217-1 has been discontinued at DiGi Electronics. Identifying equivalent substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production or repair requirements for systems utilizing this connector specification.

Substiute Parts

414217-1

TE Connectivity AMP ConnectorsIn Stock: 979414217-1 Datasheet

Current PartRFQ

5414217-1

TE Connectivity AMP ConnectorsIn Stock: 19955414217-1 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 414217-1 is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Impedance: 75 Ohms (required for RF signal integrity)
• Frequency maximum: 2 GHz (operational bandwidth)
• Voltage rating: 500 V (electrical safety margin)

Mechanical Parameters:

• Connector style: BNC (physical interface standard)
• Connector type: Jack, Female Socket (mating configuration)
• Contact termination: Solder Cup (assembly method)
• Shield termination: Solder (grounding method)
• Mounting type: Panel Mount with Bulkhead - Front Side Nut (installation configuration)
• Fastening type: Bayonet Lock (connection mechanism)

Environmental Parameters:

• Operating temperature range: -65°C to 165°C (thermal compatibility)
• Mating cycles: 500 (mechanical durability specification)

Parts meeting all these parameters are classified as direct substitutes. Variations in packaging, body material composition, finish specifications, or compliance certifications do not affect functional substitutability when all electrical and mechanical parameters remain identical.

Parameter Comparison

Engineering Selection Recommendations

The TE Connectivity 5414217-1 is a direct functional substitute for the discontinued 414217-1. Both parts maintain identical electrical and mechanical specifications across all critical parameters: BNC connector style, 75 ohm impedance, 2 GHz frequency rating, 500 V voltage rating, solder cup termination, panel mount configuration, and operating temperature range of -65°C to 165°C.

Product Status Consideration: The 414217-1 is discontinued at DiGi Electronics, while the 5414217-1 maintains active product status with significantly higher inventory availability (1954 pieces in stock versus 947 pieces for the discontinued part). This availability differential supports transition to the substitute part for new designs and ongoing production requirements.

Compliance Advantage: The 5414217-1 offers improved regulatory compliance as a RoHS-compliant component with defined REACH status, compared to the non-compliant status of the 414217-1. This compliance improvement aligns with current environmental and regulatory standards without requiring design modification.

Material Specification: The substitute part specifies Zinc Die Cast body material compared to the main part's Zinc specification. This material composition variation does not affect electrical performance, mechanical fit, or thermal characteristics within the specified operating parameters.

Packaging Consideration: The 5414217-1 is supplied in bulk packaging, whereas the main part packaging is not specified. Packaging format selection depends on procurement and assembly workflow requirements and does not affect component functionality.

Frequently Asked Questions (FAQ)

Q: Can the 5414217-1 be used as a direct replacement for the 414217-1 in existing designs?

A: Yes. The 5414217-1 meets all electrical and mechanical specifications of the 414217-1. Both parts are BNC female socket connectors rated for 75 ohms impedance, 2 GHz maximum frequency, 500 V voltage rating, and panel mount solder cup termination. No design modification is required for substitution.

Q: What is the difference between the 414217-1 and 5414217-1?

A: The parts are electrically and mechanically identical. Differences exist in product status (discontinued versus active), RoHS compliance (non-compliant versus compliant), REACH status definition, body material specification (Zinc versus Zinc Die Cast), and packaging format (unspecified versus bulk). These differences do not affect functional performance in RF applications.

Q: Why is the 414217-1 discontinued?

A: Product discontinuation information is not provided in the technical specifications. Discontinuation typically reflects manufacturer supply chain decisions, product line consolidation, or transition to improved variants. The 5414217-1 serves as the active equivalent for ongoing supply.

Q: Are there any temperature or frequency limitations when substituting the 5414217-1?

A: No. Both parts operate identically across the specified temperature range of -65°C to 165°C and frequency range up to 2 GHz. Operating parameters remain unchanged with substitution.

Q: Does the RoHS compliance difference affect compatibility?

A: RoHS compliance status reflects material composition and manufacturing process standards but does not affect electrical or mechanical compatibility. The 5414217-1's RoHS-compliant status provides regulatory advantage without performance impact.

Q: What is the significance of the Zinc Die Cast specification in the 5414217-1?

A: Zinc Die Cast is a material processing method that produces the connector body. This specification does not alter the connector's electrical characteristics, impedance, frequency response, or mechanical fit compared to the main part's Zinc specification.

Q: Can the 5414217-1 handle the same mating cycles as the 414217-1?

A: Yes. Both parts are rated for 500 mating cycles, indicating identical mechanical durability and contact reliability specifications.

Q: Is bulk packaging suitable for my application?

A: Bulk packaging is a supply format that does not affect component performance. Packaging selection depends on procurement quantity requirements, inventory management practices, and assembly workflow. The connector itself functions identically regardless of packaging format.

Q: What voltage and impedance specifications apply to the 5414217-1?

A: The 5414217-1 maintains 500 V voltage rating and 75 ohms impedance, identical to the 414217-1. These specifications ensure compatibility with RF systems designed for the original part.