TE Connectivity 413194-2 BNC Connector Jack Equivalent & Substitute Parts

Part Overview

The TE Connectivity 413194-2 is a BNC connector jack designed for 75-ohm coaxial RF applications. This female socket connector features right-angle panel mount configuration with through-hole solder termination and bayonet lock fastening. The component is classified as Active product status with 872 units currently in stock.

Substitute parts become necessary when the primary part number reaches end-of-life status, when alternative compliance certifications are required, or when inventory constraints necessitate sourcing from equivalent alternatives that maintain identical electrical and mechanical specifications.

Substiute Parts

413194-2

TE Connectivity AMP ConnectorsIn Stock: 981413194-2 Datasheet

Current PartRFQ

5413194-2

TE Connectivity AMP ConnectorsIn Stock: 20715413194-2 Datasheet

DirectRFQ

1-1634622-0

TE Connectivity AMP ConnectorsIn Stock: 9541-1634622-0 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TE Connectivity 413194-2 is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Impedance: 75 Ohms (mandatory match)
• Frequency - Max: 2 GHz (mandatory match)
• Voltage Rating: 500 V (mandatory match)

Mechanical Parameters:

• Connector Style: BNC (mandatory match)
• Connector Type: Jack, Female Socket (mandatory match)
• Mounting Type: Panel Mount, Through Hole, Right Angle (mandatory match)
• Fastening Type: Bayonet Lock (mandatory match)
• Contact Termination: Solder (mandatory match)
• Shield Termination: Solder (mandatory match)

Environmental Parameters:

• Operating Temperature: -55°C ~ 85°C (mandatory match)
• Mating Cycles: 500 (mandatory match)

All substitute parts listed maintain complete parametric equivalence across these criteria. Variations in material composition, plating specifications, compliance certifications, and product status do not affect functional interchangeability within the specified electrical and mechanical operating envelope.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: TE Connectivity 5413194-2

The 5413194-2 is the direct substitute for the 413194-2. Both parts maintain identical electrical and mechanical specifications across all critical parameters. The 5413194-2 offers superior compliance status with ROHS3 certification and REACH Affected designation, compared to the non-compliant RoHS status of the 413194-2. Current inventory of 2000 units for the 5413194-2 exceeds that of the main part number, providing enhanced supply chain availability.

Secondary Equivalent: TE Connectivity 1-1634622-0

The 1-1634622-0 is classified as a parametric equivalent that maintains full electrical and mechanical compatibility with the 413194-2. This part carries RoHS Compliant and REACH Affected certifications. However, the 1-1634622-0 is designated as Obsolete product status, indicating discontinued manufacturing. This part should be selected only when the primary and direct substitute options are unavailable, as obsolete status may impact long-term supply chain reliability.

Material composition differences exist between the main part and the parametric equivalent (Beryllium Copper versus Brass center contact material; Zinc versus Zinc Die Cast body material; Polymethylpentene versus Polyethylene dielectric), but these variations do not alter functional performance within the specified operating parameters.

Frequently Asked Questions (FAQ)

Q: Can the 5413194-2 be used as a direct replacement for the 413194-2 in existing designs?

A: Yes. The 5413194-2 maintains complete parametric equivalence with the 413194-2 across all electrical, mechanical, and environmental specifications. No design modifications are required for substitution.

Q: What is the difference between the 413194-2 and 5413194-2?

A: The primary differences are compliance certifications and inventory availability. The 5413194-2 is ROHS3 Compliant and REACH Affected, while the 413194-2 is RoHS non-compliant with Vendor Undefined REACH status. Both parts are electrically and mechanically identical with 75-ohm impedance, 2 GHz maximum frequency, 500V voltage rating, and identical mounting configurations.

Q: Why is the 1-1634622-0 listed as a substitute if it is obsolete?

A: The 1-1634622-0 is included as a parametric equivalent option for applications where the primary and direct substitute parts are unavailable. Obsolete status indicates discontinued manufacturing, which may limit future procurement. This part maintains full electrical and mechanical compatibility but should be selected only when other options are exhausted.

Q: Are there material differences between the substitute parts?

A: Yes. The 413194-2 and 5413194-2 use Beryllium Copper center contacts and Polymethylpentene dielectric. The 1-1634622-0 uses Brass center contacts and Polyethylene dielectric. These material variations do not affect electrical performance within the specified operating envelope of 75 ohms, 2 GHz maximum frequency, and -55°C to 85°C temperature range.

Q: What compliance certifications apply to each part?

A: The 413194-2 is RoHS non-compliant with Vendor Undefined REACH status. The 5413194-2 is ROHS3 Compliant and REACH Affected. The 1-1634622-0 is RoHS Compliant and REACH Affected. Selection should consider regulatory requirements for the target application and end market.

Q: Can these connectors be used interchangeably in RF applications up to 2 GHz?

A: Yes. All three parts maintain 75-ohm impedance and 2 GHz maximum frequency specifications. They are functionally interchangeable for RF coaxial applications within these frequency and impedance parameters.

Q: What is the packaging configuration for these parts?

A: The 413194-2 and 5413194-2 are supplied in Bulk packaging. The 1-1634622-0 packaging specification is not defined in the available data.