TE Connectivity AMP Connectors 34124-1 Ring Terminal Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 34124-1 is a ring terminal connector designed for 14-16 AWG wire gauges with a 1/4 inch stud connection. This non-insulated circular terminal features a brazed seam and serrated termination for crimp attachment. The part is classified as Last Time Buy, indicating discontinued production status. Identification of equivalent substitute parts is necessary to ensure continued availability and supply chain continuity for applications requiring this terminal specification.

Substiute Parts

34124-1

TE Connectivity AMP ConnectorsIn Stock: 188534124-1 Datasheet

Current PartRFQ

34124

TE Connectivity AMP ConnectorsIn Stock: 968834124 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 34124-1 is determined by strict equivalence across the following critical parameters:

Terminal Type: Circular ring configuration required for stud mounting applications Stud/Tab Size: 1/4 inch stud dimension for mechanical compatibility Wire Gauge: 14-16 AWG range for electrical and mechanical fit Termination: Crimp attachment method Contact Material: Copper composition for electrical conductivity Insulation: Non-insulated specification Features: Brazed seam and serrated termination construction RoHS Compliance: Required for regulatory alignment Moisture Sensitivity Level: MSL 1 classification

Substitute parts must match all specified parameters without deviation. Dimensional specifications including thickness (0.031"), width (0.469"), and overall length (0.855") must remain consistent across equivalent parts.

Parameter Comparison

Engineering Selection Recommendations

The TE Connectivity AMP Connectors 34124 serves as the direct substitute for the 34124-1. Both parts are manufactured by TE Connectivity AMP Connectors within the Solistrand series and maintain identical electrical and mechanical specifications across all critical parameters.

The primary distinction between these parts is product status: the 34124-1 is designated Last Time Buy, while the 34124 maintains Active status with significantly higher inventory availability (9651 pieces versus 1855 pieces). Both parts achieve RoHS Compliance and carry MSL 1 classification, confirming regulatory and environmental suitability for equivalent applications.

The 34124 substitute incorporates a tin contact finish, whereas the 34124-1 contact finish specification is not provided. This finish difference does not alter functional compatibility and represents a standard manufacturing variation within the Solistrand terminal line.

For new designs and ongoing procurement, the 34124 is the appropriate selection due to its active production status and sustained supply availability.

Frequently Asked Questions (FAQ)

Q: Can the 34124 substitute directly for the 34124-1 in existing applications?

A: Yes. Both parts maintain identical specifications for terminal type, stud size, wire gauge, termination method, contact material, and dimensional characteristics. Direct substitution is supported without circuit or assembly modifications.

Q: What is the significance of the Last Time Buy status on the 34124-1?

A: Last Time Buy designation indicates that the 34124-1 has reached end-of-life production. TE Connectivity AMP Connectors will not manufacture additional units beyond existing inventory. The 34124 substitute remains in active production and represents the recommended long-term sourcing option.

Q: Are there dimensional differences between the 34124-1 and 34124?

A: No. Both parts share identical dimensions: 0.031 inch thickness, 0.469 inch outer width, and 0.855 inch overall length. Mechanical fit and assembly compatibility are fully preserved.

Q: Does the tin contact finish on the 34124 affect electrical performance compared to the 34124-1?

A: Contact finish does not alter the fundamental electrical characteristics of the terminal. Both copper-based terminals with tin or unspecified finish maintain equivalent conductivity and current-carrying capacity for 14-16 AWG wire applications.

Q: What wire gauges are compatible with these ring terminals?

A: Both the 34124-1 and 34124 are specified for 14-16 AWG wire gauges. Wire sizes outside this range are not compatible with the crimp termination geometry.

Q: Are these terminals suitable for insulated or non-insulated applications?

A: These terminals are manufactured as non-insulated components. They do not include insulation sleeves or covers. Applications requiring insulation must incorporate separate insulation materials or use insulated terminal variants from alternative product lines.

Q: What stud sizes are accommodated by these ring terminals?

A: Both terminals feature a 1/4 inch stud connection. This dimension is fixed and not adjustable. Studs of different sizes require alternative terminal designs.

Q: Do these terminals meet RoHS compliance requirements?

A: Yes. Both the 34124-1 and 34124 are RoHS Compliant, confirming restriction of hazardous substances in accordance with applicable regulations.