Equivalent & Substitute Parts for E-Switch 320.22E11ORG

Part Overview

The E-Switch 320.22E11ORG is a tactile switch with SPST-NO circuit configuration, rated for 0.025A at 50VDC. This component features a square button actuator with top actuation, through-hole mounting, and an orange polycarbonate cap. The part is currently obsolete, necessitating identification of active equivalent alternatives to maintain design continuity and ensure component availability for new production runs and field replacements.

Substiute Parts

320.22E11ORG

E-SwitchIn Stock: 1168320.22E11ORG Datasheet

Current PartRFQ

320.01E11ORG

E-SwitchIn Stock: 1058320.01E11ORG Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The E-Switch 320.01E11ORG qualifies as a direct substitute based on the following critical parameters that determine functional equivalence:

• Circuit configuration: Both parts are SPST-NO
• Contact rating: Both rated 0.025A @ 50VDC
• Actuator type and orientation: Both feature square button, top-actuated design
• Mounting type: Both are through-hole mounted with PC pin termination
• Outline dimensions: Both measure 12.40mm x 12.40mm
• Operating force: Both require 135gf actuation force
• Switch travel: Both provide 0.60mm travel distance
• Mechanical life: Both rated for 1,000,000 cycles
• Actuator material: Both use polycarbonate construction
• Operating temperature range: Both operate -20°C ~ 70°C
• Compliance: Both are ROHS3 compliant

The primary difference is the actuator height off PCB (12.60mm for 320.22E11ORG versus 10.00mm for 320.01E11ORG) and product status (obsolete versus active). The 320.01E11ORG is the active production equivalent within the E-Switch 320 series.

Parameter Comparison

Engineering Selection Recommendations

The E-Switch 320.01E11ORG is the recommended substitute for the obsolete 320.22E11ORG. Both parts maintain identical electrical specifications, mechanical characteristics, and compliance certifications. The 320.01E11ORG carries active product status, ensuring ongoing availability and supply chain continuity.

The actuator height difference of 2.60mm (12.60mm versus 10.00mm) requires PCB layout verification to confirm mechanical clearance compatibility with enclosure geometry and adjacent components. This dimensional variance is the sole consideration for design integration.

Both parts satisfy ROHS3 compliance and REACH requirements, maintaining regulatory alignment for current production standards.

Frequently Asked Questions (FAQ)

Q: Can the 320.01E11ORG directly replace the 320.22E11ORG in existing designs?

A: Electrical and mechanical specifications are equivalent. PCB layout must accommodate the 2.60mm reduction in actuator height. Verify clearance with enclosure design and adjacent component placement before implementation.

Q: What is the significance of the product status difference?

A: The 320.22E11ORG is obsolete and no longer manufactured. The 320.01E11ORG is in active production, ensuring component availability for new builds and field service replacements.

Q: Are there packaging differences between these parts?

A: The 320.22E11ORG is packaged in standard format, while the 320.01E11ORG is supplied in bulk packaging. Verify packaging requirements for your procurement and assembly processes.

Q: Do both parts meet current compliance standards?

A: Both parts are ROHS3 compliant and REACH unaffected, satisfying current regulatory requirements for electronic component manufacturing and distribution.

Q: What parameters must remain identical for substitution?

A: Circuit configuration (SPST-NO), contact rating (0.025A @ 50VDC), actuator type (square button, top-actuated), mounting method (through-hole), outline dimensions (12.40mm x 12.40mm), operating force (135gf), switch travel (0.60mm), and mechanical life (1,000,000 cycles) must all match for functional equivalence.