3M 31036 Equivalent & Substitute Parts

Part Overview

The 3M 31036 is an active rectangular terminal connector designed for 2/0 AWG wire applications with a 3/8" stud configuration. This non-insulated, crimp-barrel terminal is part of the Scotchlok™ 31000 series and features electro-tin plated copper contacts. The part is RoHS compliant and REACH unaffected, making it suitable for regulated applications. Substitute parts are identified when equivalent electrical and mechanical parameters are required for component sourcing, inventory management, or design standardization.

Substiute Parts

31036

3MIn Stock: 121131036 Datasheet

Current PartRFQ

LCB2/0-38-X

Panduit CorpIn Stock: 1164LCB2/0-38-X Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 3M 31036 is determined by strict alignment of the following critical parameters:

• Wire gauge: 2/0 AWG
• Stud size: 3/8"
• Terminal style: Single stud hole configuration
• Termination method: Crimp barrel connection
• Contact material and finish: Copper with electro-tin plating
• Mounting configuration: Free hanging, in-line orientation
• Insulation status: Non-insulated

The Panduit Corp LCB2/0-38-X meets these core electrical and mechanical requirements, differing only in terminal type classification (rectangular tongue versus standard rectangular) while maintaining functional compatibility within the specified parameter set.

Parameter Comparison

Engineering Selection Recommendations

Both the 3M 31036 and Panduit LCB2/0-38-X are active products with current manufacturing status. The 3M 31036 maintains RoHS compliance, while the Panduit substitute achieves ROHS3 compliance, representing an enhanced regulatory standard. Both parts are REACH unaffected and carry the same ECCN and HTSUS classifications, confirming equivalent trade and export status.

Selection between these parts should be based on availability, cost considerations, and existing supply chain relationships. Dimensional variations in barrel diameter and overall width are within acceptable tolerances for 2/0 AWG crimp-barrel terminal applications and do not affect functional compatibility with standard stud configurations.

Frequently Asked Questions (FAQ)

Q: Can the Panduit LCB2/0-38-X directly replace the 3M 31036 in existing assemblies?

A: Yes. Both parts share identical wire gauge (2/0 AWG), stud size (3/8"), termination method (crimp barrel), contact material (copper), and contact finish (electro-tin). Dimensional differences in barrel diameter and overall length are within acceptable ranges for this terminal class.

Q: What is the difference between "Standard" and "Rectangular Tongue" terminal types?

A: Both configurations maintain single stud hole mounting and crimp-barrel termination. The terminal type designation reflects design variation in the contact geometry, but both are functionally equivalent for 2/0 AWG applications with 3/8" studs.

Q: Are there compliance differences between these parts?

A: The Panduit part achieves ROHS3 compliance versus RoHS compliance on the 3M part. Both are REACH unaffected. ROHS3 represents a more recent regulatory standard. Both parts carry identical ECCN (EAR99) and HTSUS (8536.90.4000) classifications.

Q: What packaging is available for these parts?

A: Both parts are supplied in bulk packaging. Current inventory levels are 1147 pcs for the 3M 31036 and 1137 pcs for the Panduit LCB2/0-38-X.

Q: Are these parts suitable for high-current applications?

A: Both parts are rated for 2/0 AWG wire, which supports high-current applications. The crimp-barrel termination and electro-tin copper contacts are standard for heavy-gauge electrical connections.